ReviewsAxial Shaft

Lovejoy 1350 Series Shaft Locking Device, Metric, 60 mm shaft diameter x 90mm outer diameter of shaft locking device, 2091 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Axial hub can move during clamping for positioning shaft.
Check Stock

Lovejoy 1350 Series Shaft Locking Device, Metric, 65 mm shaft diameter x 95mm outer diameter of shaft locking device, 2265 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Axial hub can move during clamping for positioning shaft.
Check Stock

INJORA RC Drive Shaft Steel Front Rear Center Shaft for SCX24 Gladiator AXI00005 Axial Upgrade Parts 1/24 RC Crawler Car,2Pcs

  • Etched with the INJORA logo, looks more attractive.
  • CNC Hardened steel construction, black finished to prevent corrosion.
  • Steel center drive shaft let you crawl and climb with confidence.
  • Lightweight upgrade, not only looks great but performs well.
  • Suit for Axial SCX24 Gladiator AXI00005 Axial Upgrade Parts. Not compatibilities with C-10, Jeep JLU,B-17 Betty, Deadbolt.
Check Stock

4Pcs 304 Stainless Steel Clamping Collar, 1\ Bore Size,5/8\ Width with Set Screw

  • Outside Diameter : 1-5/8" (1.625 inch / 41.275mm).
  • This shaft collar is suitable for use in various applications, for applications supporting low axial loads and simple positioning, It is commonly used for guiding, spacing, stopping, mounting, and component alignment.
Check Stock

Jeremywell 1-3/4\ Bore Double Split Shaft Collar Black Oxide Set Screw Style (4 PCS)

  • Free Shipping within the Continental United States.
  • Same business day order processing before 12:30PM PDT.
  • Corrosion resistance (Black oxide painting ) Applicable to both soft or hard shaft material, Easy to mount, Accurately and firmly fit, It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars.
Check Stock

Jeremywell 1-3/4\ Bore Double Split Shaft Collar Black Oxide Set Screw Style (2 PCS)

  • Free Shipping within the Continental United States.
  • Same business day order processing before 12:30PM PDT.
  • Corrosion resistance (Black oxide painting ) Applicable to both soft or hard shaft material, Easy to mount, Accurately and firmly fit, It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars.
Check Stock

FK Bearings COM12T 3/4 Spherical Bearing with Teflon Commercial Series, 1 Pack

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F.
  • Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft.
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise.
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place.
Check Stock

Climax Metal C-012-A Set Screw Collar, Aluminum, 1/8\ Bore Size, 3/8\ OD, With 6-32 x 1/8 Set Screw

  • Setscrew shaft collar for applications supporting low axial loads and simple positioning.
  • Effective on shafts made of softer material than the setscrew material.
  • Aluminum for resisting corrosion and tarnishing.
  • Includes a socket setscrew for securing the collar onto the shaft.
  • Operating temperatures range from -40 to 104 degrees C (-40 to 220 degrees F).
Check Stock

SurmountWay 3200PSI Pressure Washer Pump Horizontal 3/4" Shaft Replacement Power Washer Pump 2.4 GPM for 309515003,308418007, K2400HH (Horizontal)

  • 【Fit 3/4″ Shaft Horizontal Pumps】Fit Most 3/4″ Shaft Horizontal Crank Pressure Washer Engines, brands including Honda GCV , Generac, Briggs.
  • 【Pressure Washer Pump】Direct drive horizontal axial pump fits most horizontal 3/4″ shaft power washer: Could work at wide range from 2900 to 3200 PSI, best performance at 3000PSI and 2.4GPM. Good replacment for horizontal pressure washer pumps..
  • 【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine..
  • 【Easy to Install】When installing, please ensure that the keyway is installed before running your pressure washer..
  • 【Sale and After-Sale Service】The provides a convenient connection to most 3/4” diameter shaft, if you are not sure your high pressure washer could fit or not, please inform us your engine model, install size, we would like to service you..
Check Stock

DNJ TW500 Thrust Washer For 85-01 Chevrolet, Suzuki, Geo, Metro, Swift, Samurai, Sidekick, Sprint,1.0L-1.3L, L4, L3, SOHC, DOHC, Naturally Aspirated, Turbocharged

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Front and Rear Portal Axles Axial SCX10 1/10 RC Axles Crawler Car D90 Metal Aluminium Alloy Housing Assembly Metal Upgrades Parts

  • Suitable for: Axial scx10 portal axles front rear axle fit for 1/10 Axial SCX10 RC Crawler Car Model. SCX10 crawler car built for extreme off-road capability that takes you to new places and new adventures. Compatible with:The front and rear axles of this remote control car are suitable for SCX10 1/10 RC crawler car model, which can be substituted..
  • High-quality upgrade accessories: 1/10 axles high pinion gears for added ground clearance and better driveshaft angles. Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain..
  • Aluminum alloy material: scx10 axles aluminum alloy shell CNC, internal steel gear and drive shaft, excellent properties, high reliability. Alloy Front and Rear Axle Assembly Parts Lightweight, beautiful shape, durable. Directly replace Original plastic axles, Made your car more attractive and cooler. With increased height and width, it is more passable than ordinary axles and higher from the ground..
  • Axial scx10 axles the front and rear 1/10 crawler axles of the remote control car better eliminate the wave system, and there is a large gap under the axis, which greatly improves the off-road climbing performance. Improve the stability of the body and the overall performance of the remote co....
Check Stock