ReviewsAxial piston Motor

OMT Brake Caliper Wind Back Tool Kit, 24pc Brake Caliper Compression Tool Set with Thrust Bolt Assemblies Retaining Plates Caliper Hangers 18 Disc Adapters, Caliper Tool with Case, Black

  • COMPLETE BRAKE CALIPER TOOL SET: This Orion Motor Tech 24-piece brake piston compressor tool set includes 2 retaining plates, left and right thrust bolt assemblies, 18 disc adapters, 2 brake hangers, and a pair of gloves.
  • keep your tools in the heavy-duty blow molded case for easy storage and transportation.
  • EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits your vehicle and rotate the pistons back into their calipers to clear your pads.
  • embedded magnets in each thrust bolt of this brake tool assembly easily hold your drive keys and adapters in place during use.
  • UNIVERSAL COMPATIBILITY: This disc brake caliper tool set includes a large array of adapters to fit most vehicles, including hundreds of American, Japanese, and European models.
  • see below for a full list of compatible models.
  • DURABLE BUILD: The sandblasted #45 carbon steel construction of our caliper piston tool ensures long lasting performance and corrosion resistance even after years of punishing use.
  • 1 YEAR WARRANTY: Service your brakes today with peace of mind thanks to our caliper piston ....
Check Stock

Pennzoil Ultra Platinum Full Synthetic 0W-20 Motor Oil 5-Quart Single Pack

  • Full synthetic 0W-20 engine oil made from natural gas, not crude, using Pennzoil's patented gas-to-liquid PurePlus Technology.
  • No other leading motor oil provides better wear protection for your engine (based on Sequence IVA wear test using SAE 5W-30).
  • Pennzoil 0W-20 is a carbon neutral motor oil, achieved through verified Nature Based Carbon Credits that offset the CO2 lifecycle emissions.
  • Helps protect engines from loss of power and provides better fuel economy—drive on average an extra 550 miles per year (versus a dirty engine).
  • Keeps pistons dramatically cleaner than required by the toughest industry standards (based on ILSAC GF-6 and Sequence IIIH piston deposit test using....
Check Stock

Duromax XP3100PWT 2.5 GPM Gas Powered Cold Water Power Pressure Washer, 3100 PSI

  • Powerful DuroMax 7 HP Engine with Low Oil Shutdown. Oil Capacity-0.6L. Fuel Tank Size-0.79 Gallons. Thermal Relief Valve-140º Farenheit.
  • Quick Change Connectors make installing the hose a snap, 6 Quick Connect Nozzles includes: 0, 15, 25 and 40 degree, soap applicator and Turbo Nozzle.
  • Convenient on-board storage for spray gun, high pressure hose and nozzles.
  • Pressure Output: 3100 PSI Gallons Per Minute: 2.5, 3-Piston Axial Cam Brass Head Pump.
  • Durable welded frame protects the engine and pump, making it easy to lift, Cushion grip and easy to pull trigger reduce fatigue and improve comfort.
Check Stock

DEWALT 20V MAX String/Blower Combo

  • Up to 450 CFM of air volume and up to 125 Mph with concentrator.
  • Innovative axial fan design that maximizes on air output and run time.
  • Low noise during operation - 66 dB(A), ideal for noise sensitive regions and properties.
  • High-efficiency brushless motor helps extend run time and motor life.
  • Lightweight and ergonomic design allows for easy control and arm movement.
Check Stock

Bzsunway 696ZZ 6mm x 15mm x 5mm Double Shielded Pre-Lubricated Miniature Deep Groove Ball Bearing (20pcs)

  • 【Wide Application】 Used to accommodate radial and axial loads in both directions. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment, electric motors,band raw ,skateboard..
  • 【Protective shields】 Fitted with two steel dust shields in the outer ring of the bearing to protect the working parts of the bearing from the influence of debris that may be introduced, especially useful in high temperature applications and where low torque is required..
  • 【Superior Quality】 Our 696ZZ deep groove ball bearing are made from high-quality chrome steel, durability and resistance to under heavy loads.  .
  • 【Bearing Features】 With small friction and high-limit speed，the bearing is low vibration, low noise, high precision. Use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads,.
  • 【Satisfactory Service】 If you are not satisfied with our products.You can request a full refund within 30 days to support a 12 month warranty.Professional and sincere service allows you to purchase without risk !.
Check Stock

The ROP Shop | VRO Conversion Fuel Pump for Johnson, Evinrude, OMC, BRP 5004558, 0438400 Engine

  • The ROP Shop replacement VRO Conversion Fuel Pump for Johnson, Evinrude, OMC, BRP 5004558, 0438400 Engine.
  • Specs - Refer to images 2 & 3 for more information.
  • Includes - (1) Vertical Ratio Oil Injection Conversion Fuel Pump.
  • Fits: V4 & V6 Crossflow and Looper outboard engines with 90° angle cylinder block. Does not fit 60° or 3 cylinder applications. Crossflow engines have shaped piston tops, Looper engines have flat top pistons. The 90° motor will have a more triangular profile, while the 60° motor is more rounded.
  • This is a Pre-Mix VRO Conversion Fuel Pump Kit. It replaces the original VRO fuel pump and now mixes the fuel and oil in the fuel tank instead.
Check Stock

uxcell 12mmx12mm Clamp Tight Motor Shaft 2 Diaphragm Coupling Coupler

  • Clamp-style mount for secure attachment to shaft.
  • Accommodates angular, axial and parallel misalignment.
  • Aluminum hubs for light weight, stainless steel discs for strength.
  • Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

uxcell 16mmx19mm Clamp Tight Motor Shaft 2 Diaphragm Coupling Coupler

  • Clamp-style mount for secure attachment to shaft.
  • Accommodates angular, axial and parallel misalignment.
  • Aluminum hubs for light weight, stainless steel discs for strength.
  • Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

TIMEWAY A10VO71 Hydraulic Piston Pump A10VO71DRG/31R-VKC92K68 Keyed Parallel Shaft High Pressure Variable Axial Pump

  • Open circuit, axial piston pump for mobile applications such as telehandlers, backhoe loaders, and skid steers.
  • Saddle-type swashplate with steel-backed polymer bearings and a pressure lubrication passage to reduce wear and support internal loads.
  • Compact design for applications with limited space.
Check Stock

Makita XT286SM1 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 4.0 Ah

  • The 80V brushless axial blower and 16” string trimmer combo pack provides ultimate performance at a great value.
  • Brushless motor provides more torque, quiet operation, and longer life, Ideal For: Up to 1 Acre.
  • String Trimmer features a 14 / 16-In cutting path, durable .080” line, bump feed head, adjustable handle, and variable speed trigger for added....
  • Blower features an axial design, with up to 500 CFM / 125 MPH wind speed. Variable speed trigger with 3 speed selections (low / medium / high).
  • Includes 80V 2Ah lithium-Ion battery and rapid charger (30-minute charge time).
Check Stock

The Whistle Blower

  • 【Axial Fan Design & 350CFM】The innovative axial fan design maximizes the air output and wind power that helps prevent clogging. 350CFM wind volume is just enough to blow up some small stones, wet maple leaves, and debris, so it will not blow the leaves everywhere and hurt your beloved lawn..
  • 【Infinitely Variable Air Speed】MYTOL leaf blower provides infinitely variable speed from 0-150MPH at the touch of a button. For example, fine dust requires a lower wind speed, and as the dust gets bigger, press more to blow up easily. While you press the button to the end, the powerful copper motor ejects 150MPH of wind from the 2.7" wide-mouth nozzle, allowing you to clear large areas with fewer passes..
  • 【2 X 20V Batteries & Charger】MYTOL blower includes 2 Batteries & 1 Charger. The actual duration of the 2.0Ah 20V battery at the highest wind speed is about 25 minutes, which is enough for your work. You can alternate the batteries in turns without delay. A full charge only takes 50 minutes which supports you to work effectively..
  • 【Ultra-lightweight & Ergonomic Design】The cordless leaf blowers is within 3.9 lbs, ergonomic body that naturally molds to the blowing direction. It can be operated comfortably with one hand. It will be a good helper fo....
Check Stock