ReviewsAxis Wood Cnc

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • An effective working area of 15.7” x 15.7” x 3.1” is large enough for most daily CNC projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height..
  • New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine..
  • Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
Check Stock

SCULPFUN Laser Engraver Working Table,Laser Honeycomb Pad,Desktop Protection,11.81x7.87x2.17 in,for Laser Engraving Machine Cutter Tool Set

  • 【Metal desktop protection board】Honeycomb Working Table is equipped with a metal desktop protection board, which can protect the table from laser damage. The Laser Protection Pad is very suitable for small DIY diode lasers..
  • 【High-quality workmanship with measuring ruler】The X-axis and Y-axis of the Laser Honeycomb Working Table contain precision scale lines to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraving. The Laser Protection Pad is made of metal and processed by high-precision CNC. The structure is firm, not easy to deform, and has high flatness..
  • 【Wide compatibility】Laser Honeycomb Working Desk can be compatible with various mature engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine..
Check Stock

2 Pieces CNC Router Z-Axis Tool Setting Touch Plate CNC Touch Plate Probe Block Router Probe Milling Tool for Milling DIY Engraving Machine Probe

  • Package includes: you will receive 2 pieces of CNC router Z-Axis tool touch probes, which are equipped with high precision, smooths surface, and....
  • Size parameters: the size of this setting touch plate probe measures approx. 40 x 10 mm, and the length of cable measures approx. 1.2 cm, which can....
  • Reliable material: this CNC router Z-Axis tool is made of quality alloy material, strong and durable, and the bottom is insulated, waterproof and....
  • Easy to use: this Z-Axis router tool setting touch probe has the characteristics of high accuracy, smooth surface and exquisite design, and it is easy....
  • Wide range of application: this setting touch plate probe is suitable for processing most materials, such as woodworking, aluminum, acrylic, plastic,....
Check Stock

ATOMSTACK Laser Engraver, A5 20W Laser Engraving Cutting Machine CNC, 4.5W-5W Output Power, Upgraded Precise Fixed-Focus Machine, Eye-Protection Design, DIY Laser Marking formWood, Leather, Vinyl

  • Wide Compatibility: The Laser engraver cutter can be compatible with various mature engraving software, such as LaserGRBL, LightBurn(paid), support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF, etc..
  • Precise Scale Lines Axis: There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs.☆☆☆Please note: to engrave stainless steel, the surface must be painted black first, and it can be wiped clean after engraving..
Check Stock

Genmitsu 3 Axis GRBL 1.1h 32-Bit CNC Controller Board for CNC Router Machine 3018-PROVer V2

  • This controller board is compatible with Genmitsu CNC 3018-PROVer V2 CNC Machine..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1h..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Functional Input Interface: Includes X, Y, Z limit switches, Z-Axis tool setting touch probe, emergency stop switch, GRBL offline controller, MPG, 3 pin laser and air assistance pump..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability. The outer ABS case could protect the control board well..
Check Stock

NovelLife Mini Drill Press Precision Benchtop Drilling Machine Elecric Portable Table Driller CNC 795 Motor B10 Chuck Metal Wooden DIY Jewelry Making Crafts Tool

  • ★Solid Structure★ Solid metal structure with 3 metal axis, 2 liner bearings, dual spring ensure precision drilling.
  • ★Strong and Adjustable Speed★795 DC motor proving max. 7000RPM speed and 24V adjustable power supply to regulate the speed ensure strong and precision drilling capacity.
  • ★Compact★5.9X4.7X8.7inch compatible size but has 40mm max. drilling stroke and low noise enable you to use it at home.
  • ★Add-on Expansion Design★ Two type slots on the base enable you to install the mini bench vise or CNC sliding table for your CNC drilling projects..
  • ★Various Drilling Capacity★B10 drill chuck compatible for 0.6-6mm HSS drill bits for wood, plastic plate, resin plate, aluminum and another soft material drilling.
Check Stock

Engraving Pen, Safe Multi Purpose Electric Carving Pen Reliable Portable for Pet Tags for Blessing Tags

  • ...f-contained short circuit protection, Not easy to damage.
  • ♞【Offline Controller】Great for beginners. Upgrade from 128MB to 1G Capacity. Main advantages: 1,can operate without connect the computer.
  • 2,Included SD card reader to write into the root directory G-code files or NC file.
  • Support Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle.
  • ♞【Wide Application】Suitable for carve wood, plastic, acrylic, PCB CCL, soft metal like copper and aluminum and other materials, but can not carve hard metal, jade and other very hard texture of the items.
  • ♞【Professional Factory Team】Please let us know if you need any help about the cnc machine.
Check Stock

SainSmart Genmtisu GRBL Controller Board for CNC Router Machine 3018-PROVer/ 3018-PROVer Mach3/ 3018-MX3

  • This controller board is compatible with Genmitsu CNC 3018-PROVer. If you have already had the Genmitsu CNC Router 3018-MX3/ 3018-PROVer Mach3, this controller board can help you turn Mach3 control to GRBL control..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1f..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Input interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability.
Check Stock

Genmitsu 3020-PRO MAX CNC Router Machine for Metal Carving and more, GRBL Offline Controller, with Limit Switches & Emergency-Stop, XYZ Effective Working Area 300 x 200 x 72mm (11.8 x 7.9 x 2.8inch)

  • Bigger and better with an all new extra rigid and beefy design featuring an increased Z Height of 72mm dual steel X axis guide rails, all aluminum spindle holder and 300W spindle. All these upgrades make metal carving easier, ideal for an endless variety of drilling, and carving operations on various metals, like brass, copper and 6061 aluminum, etc..
  • Upgraded linear guide structure and 4040 Y axis profiles highly improve the engraving accuracy and processing strength, eliminating Z axis wobble issues that most other desktop CNC machines have..
  • One-piece machined and molded aluminum design ensures flatness and strength of the work platform. Integrated measurement scale is convenient for material positioning. The platform is compatible with most of the CNC clamps on the market..
  • Everything you need out of the box. The Genmitsu 3020-PRO MAX router already includes all of the accessories and components you need at an affordable price, including offline controller, XYZ axis limit switches, emergency stop switches, Z-probe and more..
  • The pre-assembled module of XZ Axis Gantry and Base A....
Check Stock

CNCTOPBAOS 3 Axis Desktop DIY Mini CNC 3018 Router Kit GRBL Control Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine Working Area 30x18x4.5cm

  • ...er Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • Nema17 stepper motor 1.3A/0.25N.m/42x42x34mm.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Working area】30x18x4.5cm.
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux.
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change the spindle to a 3pins module,also can carve the kraft paper, wood, leather(wallet), bamboo..
  • ♞【User Manual&Software】Our parcel include a 4G USB flash drive include english user man....
Check Stock

CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK

  • ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
  • ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
  • ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock