ReviewsAxle Cap Nuts

Powerbuilt 4 Piece Axle Nut Socket Set Kit 10 - 648635, Black

  • For Removing Front Wheel Drive Axle Nuts.
  • Impact Rated 6-Point Chrome Vanadium Sockets.
  • Kit Contains 30Mm, 32Mm, 34Mm And 36Mm Sockets To Cover Almost All Applications.
  • Tool set for removing front wheel drive axle nuts.
  • Impact rate 6-Point chrome vanadium sockets.
  • Kit 10 includes sockets sizes 30mm, 32mm, 34mm and 36mm for front wheel axle nuts.
Check Stock

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

Kuryakyn 7202 Motorcycle Accent Accessory: Fork Skin Kit for 2004-17 Harley-Davidson Sportster Motorcycles with Single Disc Front End, Chrome

  • Fork skins specifically designed for the Harley-Davidson Sportsters.
  • Transform your front end for a fraction of the cost and look like a million bucks.
  • Chrome out 39mm front ends and provide the improved handling associated with fork brace to get that showroom ride.
  • Includes (1) chrome narrow fork brace, (2) chrome fork brace inner clamp half, (1) chrome left fork skin- (deep caliper cutout), (1) chrome right fork skin - (no cutout), (1) right axle cap - with black plastic axle cap carrier - without threads -'04-'07, (1) left axle cap - with black plastic axle cap carrier - threaded '04-'07, (1) round hole axle cap-'08 and later, (1) hex hole axle cap - '08 and later, (1) hardware kit.
  • suggested tools for installation (not included): set of hex wrenches, set of combination wrenches, clean rag, foot-pound torque wrench and hex wrench socket set.
  • Compatible with Harley-Davidson models: '04-'17 Sportster's with Single Disc Front End (excludes '11-'17 XL883L, '09-'17 XL883N, '11-'17 XL1200C, '16-'17 XL1200CX, '08-'12 XL1200N, '14-'17 XL1200T, '10-'17 XL1200X).
Check Stock

The ROP Shop | Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft Axle

  • The ROP Shop replacement Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft, Axle.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

Powerdyne - Y3 Skate Tool - 1/2 Socket 9/16 Socket and 15/16 Open Wrench

  • COMPACT, PORTABLE DESIGN - The PowerDyne Y3 Skate Tool has a design that allows for versatile functionality, while still fitting in your pocket..
  • ERGONOMIC, NO-SLIP GRIP - This skate tool has an ergonomic design that provides great grip and torque for any project..
  • 1/2" SOCKET FOR AXLE NUTS - This all-in-one skate wrench has a 1/2" socket that is perfect for adjusting standard axle nuts..
  • 9/16" SOCKET FOR KINGPIN NUTS - The PowerDyne multi-functional tool also features a 9/16" socket for kingpin lock nuts on roller skates..
  • DURABLE FOR LONG USE - The stoppers will give you long-lasting and quality use. You will be able to see a safety line that indicates replacement. This....
Check Stock

AlveyTech 11x7.10-5 PVC Plastic Tire Sleeve for Drift Trikes & Go-Karts

  • The ROP Shop replacement 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

ELOS Skateboard Hardware Longboard Lock Nuts for Trucks. Longboard Trucks Axle Washers (Speed Rings) for Speed Bearings. 5 Sets of Locking Truck Nuts Included. Skateboard Nuts for Wheels.

  • [SECURE and SAFE] Full-size Nylon skateboard locking nuts keep your wheels secure..
  • [RUST RESISTANT and DURABLE] Nickel-coating protects you from weather and humidity. High strength hardened steel parts to last a lifetime..
  • [FULLY COMPATIBLE] These skateboard washers and axle nuts were made to fit on all standard skateboards, longboards, and cruisers..
  • [EXTRA SET] Includes 10 axle washers and 5 axle nuts for the times something rolled under the workbench..
  • [100% SATISFACTION GUARANTEED] User instruction and link to step-by-step video tutorial included in the package. 100% Satisfaction Guaranteed or your money back because we have full faith in our products..
Check Stock

The ROP Shop | 40 Inch Shaft Kit for Drift Trike Bikes includes (4) Bearing Flangettes PFT-206

  • The ROP Shop replacement 40 Inch Shaft Kit for Drift Trike Bikes includes (4) Bearing Flangettes PFT-206.
  • Specs - Shaft Size: 40". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 40" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

The ROP Shop | 40 Inch Shaft Kit for Drift Trike Bikes with (3) Key Stocks 6x80, Chain #420

  • The ROP Shop replacement 40 Inch Shaft Kit for Drift Trike Bikes with (3) Key Stocks 6x80, & Chain #420.
  • Specs - Shaft Size: 40". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 40" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

Powerdyne - Y4 Skate Tool - 1/2 Socket 11/16 Socket 9/16 Socket and 5mm Allen Wrench

  • COMPACT, PORTABLE DESIGN - The PowerDyne Y4 Skate Tool has a design that allows for versatile functionality, while still fitting in your pocket..
  • ERGONOMIC, NO-SLIP GRIP - This skate tool has an ergonomic design that provides great grip and torque for any project..
  • 1/2" SOCKET FOR AXLE NUTS - This all-in-one skate wrench has a 1/2" socket that is perfect for adjusting standard axle nuts..
  • SOCKETS FOR KINGPIN NUTS - The PowerDyne multi-functional tool also features a 9/16" socket and an 11/16" socket for adjuting kingpin lock nuts. Also....
  • MATCH YOUR SKATES - These skate wheels come with a 78A hardness urethane in a compact 31 mm x 57 mm size. This product is not a children's product and....
Check Stock

The ROP Shop | 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5

  • The ROP Shop replacement 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock