ReviewsAxle German Type

Dayton 4Yx97 Load Wheel Assemblies with Bearings, Axles & Fasteners

• Fits most hand trucks and other utility equipment. Compatible with nearly every hub length and bearing Size for tires measuring 10. 2" In diameter (labeled as 4. 10/3. 50-4")..
• Features a load capacity of 300 pounds and a Sawtooth tread for the perfect balance of traction and maneuverability..
• Comes with a 2. 25" Offset hub and bearings for a 5/8" Axle Pre-Installed. Includes an adapter kit to fit hub lengths up to four inches and an axle size of 3/4"..
• Adapter Kit features: (1) 1/4" Spacers, (3) 1/2" Spacers, (2) 3/4" Bushings, (1) 5/8" Axle cap..
• Tube type design makes fixing a flat as simple as installing and inflating a new Inner tube, instead of replacing the whole assembly..

The ROP Shop | 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5

• The ROP Shop replacement 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5.
• Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
• Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
• This kit is used for many Drift Trike Bikes.
• Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.

DDCSV3.1 Standalone Motion Controller off-line 100 Pulse MPG Handwheel Emergency Stop for CNC Router Engraving Machine (3-Axis with MPG)

• 16 opto isolated digital inputs,3 opto isolated digital outputs.Analog spindle control 0-10V spindle control (can be modified as PWM output).Drive output type, strong anti-interference ability, long-distance transmission..
• Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.5 inches TFT screen, resolution ratio: 480x272,17 operation keys..
• 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle.24VDC power input, minimum current is 0.5A. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
• ARM9 main control chip,FPGA core algorithm chip.1GB internal memory and support standard MPG.Jog function for each axle (continuous, step, defined distance)..
• USB flash disk support for G code file input,no size limited of the G-code file.Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved.Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation..

SRAM 746 X7 6-Bolt Disc 32H 12x142mm Rear Hub

• Axle measures 10 mm diameter by 145 mm length.
• Available in black anodized finish with adhesive stickers.

Kaper II A-K-319-CNA Axle Cover (Push-Through, Center, 3.19' Dia, Stainless Steel), 1 Pack

Detroit Axle - Front Wheel Bearing Hub Assembly Replacement for Chevy Trailblazer Isuzu Ascender Olds Bravada GMC Envoy Buick Rainier w/ABS - 2pc Set

• Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
• Kit Includes: 2x Front Wheel Bearing Hub Assembly.
• Hub Specifications: Position: Front Left and Right | Lugs: 6 Bolts | ABS Type: Sensor Wire | Flange Type: 3-Bolt Triangular.
• Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs.
• 10-Year Warranty. Detroit Axle Is a Leading Global Retailer and Distributor of OE Re-manufactured and New Aftermarket Auto Parts.

Marathon Universal Fit Pneumatic (Air Filled) Hand Truck / All Purpose Utility Tire on Wheel with Adapter Kit Included

• Fits most hand trucks and other utility equipment. Compatible with nearly every hub length and bearing Size for tires measuring 10. 2" In diameter (labeled as 4. 10/3. 50-4")..
• Features a load capacity of 300 pounds and a Sawtooth tread for the perfect balance of traction and maneuverability..
• Comes with a 2. 25" Offset hub and bearings for a 5/8" Axle Pre-Installed. Includes an adapter kit to fit hub lengths up to four inches and an axle size of 3/4"..
• Adapter Kit features: (1) 1/4" Spacers, (3) 1/2" Spacers, (2) 3/4" Bushings, (1) 5/8" Axle cap..
• Tube type design makes fixing a flat as simple as installing and inflating a new Inner tube, instead of replacing the whole assembly..

CyclingDeal Mountain Bike 26\ 5/6/7/8 Speed Double Wall Alloy Wheelset - Bicycle MTB Thread-on Freewheel - Bolt-on Axle Front & Rear - 18mm Inner Rim Width

• COMPATIBILITY: This 26 inch MTB wheelset is compatible with 5-8 speed screw-on freewheel and works with V brakes only. The hubs are bolt-on type..
• SPECS: Front Hub: Alloy 36 holes, bolt-on type, axle length 100mm. Rear Hub: Alloy 36 holes, bolt-on type, axle length 135mm, 5/6/7/8 speed thread-on freewheel compatible. ED Black steel spokes. Brass CP nipples. Internal Width: 18 mm. Fit Tyre Type: Clincher. Valve Hole: 8mm A/V. Brake Type: Rim brakes with CNC braking surface. Weight: 2019g=4.4lbs. Package: Front and rear wheel fully assembled with spokes, hubs, rim tape..
• STRONG AND DURABLE: Sturdily built using quality alloy aluminum. Double-wall rim offers a huge performance advantage to the single-wall rims..
• HAND-BUILDING: The whole wheel-building process is finished by hand, spokes tension, receiving more time and attention to getting more perfectly true and round, and getting the spoke tensions within a smaller range.
• ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a 2-year warranty! Made in Taiwan..

Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1\ to 2-7/8\ IDs

• 8PC. SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set by Orion Motor Tech provides a 5/8" slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks.
• AXLE PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more.
• SEAL PULLER SET: The 5.5 pound slide hammer and its sturdy T handle provide the firm grip and torque needed to pop out worn and damaged seals and other press fit parts using the included hook.
• BEARING PULLER SET: The small, medium, and large bearing puller adapters cover inner diameters from 1 to 1-7/8.

Ski-Doo New OEM Starter Grip, 529000060

• ■ DENESTUS Go Kart Buggy Quad Rear Wheel ATV Snow Sand Snowmobile Rear Axle Track Assemly..
• ■ Application : This item fit gasoline motor use. Such as,Snowmobile, Beach motorcycle, Mountain motorcycle DIY etc..
• ■ Size : Please carefully refer to the parameters on the detail page and the size on the picture..
• ■ Material with Durable Alloy and Metal. Type:Rear Axle Track Assemly with track parts and Placement on Vehicle Rear，Left, Right..
• ■ DENESTUS Free Shipping Fast Stock By USA. We promise provide 100% satisfied after-sales service.Contact us for any problem, we will reply to help you solve your confusion..

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

• ...and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
• The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
• Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
• These tools make the job simple and prevent damage to your bearings when pulling.
• Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
• For removal only, not intended for installation.
• FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
• Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
• Sizes permanently laser-etched on tool for easy identification.
• Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
• EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
• PACKAGE CONTENTS: Package includes (3) rear axle bearing removers and (1) carrying case f....