ReviewsAxle Housing

Axial AX31438 AR44 High-Pinion Front Axle or Rear Locked Axle Complete Parts Set (53-Pieces) - Fits SCX10 II: AXIC1438 , Black

  • Complete parts set lets you build either a complete front axle or a complete rear axle.
  • High pinion design provides added ground clearance and better drivershaft angles.
  • Small pumpkin for increased clearance and a scale look, while optimized 3.75 gear ratio reduces torque twist.
  • Single piece axle housing for added strength, 1-piece all-metal locker, and bolt on link mounts.
  • Allows up to 45 degrees of steering and provides smooth action for a higher performing, more efficient drivetrain.
Check Stock

Bang II (Feat. Uppercase 5ive)

  • Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
  • Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
  • The bearing adapters are included in the set.
  • We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check Stock

6602 Differential Deflecting Bearing Preload Wrench fit for Chrysler/Dodge Vehicles Axle Tube Quick Delivery Equipment Hand Tools

  • Fit for: Works on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles.
  • This tool is able to loosen the differential bearing adjusters inside the housing through the axle tube ( you need to use with socket).
  • Made of standard No.1045 steel with high strength and toughness for durability and perfect match.
  • It will perfectly fit inside axle tube to access the threaded adjusters with sleek design, and there is about 6″ of heat shrink on the wrench-end which protects the oil seal and wheel bearing from damage when using.
  • Package included: 1pcs Differential Bearing Preload Wrench ( 2 year warranty).
Check Stock

Aluminum Axle Front & Rear Axle for 1/10 RC Crawlers Axial Wraith 90018 90048 90053

  • Suitable for Wraith 90018 90048 90053 RR10 1/10 RC Rock Crawler Complete Alloy Front and Rear Axle Assembly Parts Upgraded .
  • Machined from aluminum and anodized for good looks.
  • Material: Aluminium Alloy( Housing ,Steering Rod) and Steel alloy (Gear, CVD Driveshaft).
Check Stock

Axial RC Truck 1/10 SCX10 III Jeep JT Gladiator Rock Crawler with Portals RTR Batteries and Charger Not Included Red AXI03006T2

  • Replica V8 engine cover, gear housing and distributor housing cover and protect the engine while the scale appearance and adding forward mounted....
  • With the DG function gear option, you can lock the rear axle from the transmitter for front wheel drive and a narrower turning radius.
  • The three-piece body provides a more realistic deep bed.
  • Spektrum DX3 DSMR radio is fully compatible with the smart telemetry potential of the installed company Smart 40A ESC/receiver.
  • Manufacturing level comes with everything needed to operate next to a battery and a compatible charger.
Check Stock

TeraFlex 3442002 Ball Joints (Premium JK Dana 30/44 Ball Joint Kit)

  • Fits JK/JKU Wrangler w/ Dana 30 or 44 axle.
  • Heat treated 4140 chromoly ball/stud and 1045 carbon steel housing.
  • 2 grease zerk fittings allow greasing access from either side.
  • Extremely hard sintered wear bushings to handle extreme side load demands w/out failure.
  • 30mm (1.18") adjustable ball stud for accurate initial and future preload adjustments using simple hand tools.
Check Stock

OGRC Complete Axles Front Rear Axle Assembly Bridge Diff Housing Cover Steering Knuckle Rod Tie Links with Servo Mount for SCX24 Bronco Gladiator Deadbolt JLU C10 Axial 1/24 RC Crawler (Black)

  • 【Compatible With】The front and rear axles kit is suitable for axial scx24 AXI90081, AXI00001, AXI00002, AXI00005, AXI00006.
  • 【Great Performance】it improves the overall performance of the portal axle housing, excellent climbing and off-road performance improves vehicle stability..
  • 【Superior Material】Made of aluminum alloy 6061-T6 to adds strength and precision where you want it most..
  • 【Easy to Upgrade】Easy to install, can replace the original axle assembly directly to obtain higher strength..
  • 【Customer Service】If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!.
Check Stock

INJORA RC Frame Chassis Assembled Frame Chassis for 1/10 RC Crawler SCX10 II 90046 90047 (with Wheels)

  • Two version are optional (A: with wheels B: without wheels).
  • Injection molded nylon axle housing, Steel internal gears and driveshaft, durable in use.
  • Lower the center of gravity forward, make RC Crawler more stable.
Check Stock

ATP Bearing Race and Seal Bush Driver Set 10pc

  • 【VERSATILE】Will help users easily install race seals without damaging the race or axle housing.
  • 【CONTENTS】 9 collar/disc sizes: 1.565", 1.750", 1.965", 2.325", 2.470", 2.555", 2.830", 2.995" and 3.180" along with driver handle 5-1/2”.
  • 【TECHNOLOGY】Constructed form high strength aluminum for extra durability and strength.
  • 【APPLICABLE】Suitable for straight installation on cars, small engine trucks, motorcycles, etc..
  • 【EASY STORAGE】Comes in a blow molded case for safe & easy transport and Storage.
Check Stock

Taylor Made Products 1072 Dock Pro Inflatable Dock Boat Wheel, 12 inch Diameter, Corner Mount

  • Smooth rolling wheels offer substantial dock cushioning.
  • Feature molded-in valves to adjust the level of firmness.
  • Heavy-duty hot-dipped galvanized hardware mounts securely to the dock.
  • 12" and 18" wheels use a large 2" diameter axle housing for maximum strength.
  • Brackets and wheels are not interchangeable.
Check Stock

Loctite 518 51817 6ml Red Gasket Eliminator Tube

  • RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
  • FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area..
  • MULTI-USE. Valve covers, rocker covers, oil pans, water pumps, end seals, intake manifolds, and rear axle housing as well as industrial furnaces, ovens, etc..
  • CONVENIENT CURING. Tack-free in 1 hour. Full-strength in 24 hours..
  • LOCTITE 596 RTV RED SILICONE replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..
Check Stock