ReviewsAxle Hub Nut Socket

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Performance Tool - Clutch Hub Spanner Socket W83012

  • Removes many different four pin lock nuts on Honda powered Motorcycles ATV's and Tractors, Convenient 20mm and 24mm sizes on one 1/2 in. drive socket..
  • Heat treated steel construction for dependability and long life, 20mm removes the Counter Balancer Nut, Clutch Hub Nut, Crank Shaft Nut, and Oil....
  • 24mm remove the Oil Filter Rotor Lock Nut, and Clutch Hub Lock Nut..
  • CRF50, XR200, XR200R, XR250L, XR250R, CL, CT, S, L, XL, SL models, Z50, XR50, ATC70, ATC90, C70, CL70..
  • CRF70, CT70, SL70, TRX70, XL70, XR70, TRX90, 50cc, 70cc, 90cc, 90cc, 110cc, 125cc ATV, dirt bikes, and go karts..
Check Stock

NEIKO 02526A 35mm Socket | 1/2” Drive Deep Impact Socket | Spindle & Axle Nut Socket | 12 Point |Chrome Molybdenum Cr-Mo |Deep Well Hub | Triple Square | Axle Shaft Nut Remover

  • [QUALITY]: Heavy duty, drop forged premium chrome molybdenum steel to handle extreme levels of impact and torque changes..
  • [DURABLE]: Black phosphate coating increases protection from the elements ensuring a long lasting socket..
  • [EFFICIENT]: 12 point hex socket design for most axle hub and spindle nuts for wheel bearings, CV axles, and knuckle assembly. Works with 6 point nuts also..
  • [CONVENIENT]: Rounded corner design to prevent rounding and slipping fasteners. Extra deep socket to reach, remove and install axle nuts..
  • [SIZES]: Standard half inch square drive x 35 millimeter. High contrast laser etched socket for high visibility..
Check Stock

NEIKO 02527A 36mm Socket | 1/2” Drive Deep Impact Socket | Spindle & Axle Nut Socket | 12 Point |Chrome Molybdenum Cr-Mo |Deep Well Hub | Triple Square | Axle Shaft Nut Remover

  • [QUALITY]: Heavy duty, drop forged premium chrome molybdenum steel to handle extreme levels of impact and torque changes..
  • [DURABLE]: Black phosphate coating increases protection from the elements ensuring a long lasting socket..
  • [EFFICIENT]: 12 point hex socket design for most axle hub and spindle nuts for wheel bearings, CV axles, and knuckle assembly. Works with 6 point nuts also..
  • [CONVENIENT]: Rounded corner design to prevent rounding and slipping fasteners. Extra deep socket to reach, remove and install axle nuts..
  • [SIZES]: Standard half inch square drive x 36 millimeter. High contrast laser etched socket for high visibility..
Check Stock

KASONG Chrome ABS 33 mm Thread-On Dome Axle Cover Combo Kit with Removable Hub Caps and Lug Nut Covers for Semi Truck

  • Chrome Plastic 33 mm Thread-On Dome Axle Cover Combo Kit with Removable Hub Caps and Lug Nut Covers.
  • Includes 2 Front and 4 Rear Wheel Covers,6 Removable Hub Caps,60 Dome Nut Covers,1 Installation Tool.
  • Fits Most (10 Hole) 11 1/4" Bolt Circle Applications,Fits Most 20.
Check Stock

TRQ Front Wheel Bearing & Hub Assembly Pair for Chevy GMC Pickup Truck 2WD Van

  • This Kit Contains: Hub, Bearing, Retaining Ring, and Axle Nut.
  • Compatible with or fits: 2008 - 2014 Scion xD.
Check Stock

MOSNAI 0.75 Inch 24 Splines Hole Golf Cart EZGO TXT Brake Drum Hub Assembly for 1982-up Electric & 1982-1993 2-Cycle Gas Golf Cart, Replace OEM# 19186G1 19186G1P 17082G2 17298G1, 1-Pack with Nuts

  • ✅【Fit Models】EZGO brake hub fit 1982-up electric golf cart and 1982-1993 2-cycle gas golf cart. Not fit 4 cycle gas EZGO golf cart..
  • ✅【Product Feature】There is a 3/4-Inch center hole with a 24-tooth star spline, the hub is held in place by a castellated nut (5/8-Inch x 18tpi) and a thick (118-Inch) flat washer..
  • ✅【Replace OEM Part】This EZGO TXT rear brake drum/hub is a replacement for the earlier hub & drum and has the star spline instead of the straight key.Replace OEM# 19186G1, 19186G1P, 17082G2, 17298G1..
  • ✅【Note】 This EZGO TXT drum brake will NOT operate with a keyed axle/hub interface. Hub spline and Rear Axle Shaft Spline should be matched tight. When one of them is wear out, both of them should be replaced at the same time. Other wise the hub spline will strip soon..
  • ✅【Package Content】1*EZGO rear hub with drum washer, 4* chrome lug nuts. Any problem please feel free to contact us, we are there for YOU !.
Check Stock

8629 Wheel Hub Removal Tool Replacement for ATD Tools,Compatible with All Axle Bolt Hubs (5, 6 and 8 Lug Hubs)

  • 1.This tool helps you remove the hub assemblies quickly and safer without damaging the axle..
  • 2.There are enough flange bolts in the package to meet your needs as much as possible..
  • 3.Simple Operation:Find the flange nut that suits you, then fix the 8629 hub removal tool on the hub, and then hit the end of the tool with a hammer until the hub is loose, then you can easily remove the hub.
  • 4.Strong materials and construction increase the service life of the tool..
Check Stock

XtremepowerUS Multiplier Torque Wrench Labor Saving Lug Nut Wrench Cr-v Socket (Torque Wrench W/ 4 Socket) + Case

  • ...ove stubborn lug nuts with minimal effort.
  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1-inch drive sockets.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut, ext....
Check Stock

TUSK Racing Axle Block Orange for KTM 530 EXC-R 2008-2011

  • Fitment: The Front Axle Nut Covers Compatible for Harley 2002-2011 VRSC (except VRSCF and VRSCR), for 2015-later XG, for 2008-later XL Sportster , for 2008-2017 Dyna, for 2007-later Softail (except Springer, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and for 2008-later Touring and Trike models. 2018-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBR, FXBRS and FXLR models require separate purchase of Front Axle Adapter Kit..
  • Package Included: One Pair of Front Axle Nut Cover Bolt Kit.
  • Function: The Front Axle Nut Cover Caps can protect front axle hardware from dirt, moisture, dust..
  • Great Replacement:These Front Axle Nut Cover with spinning blades are great replacement for your old Axle Nut Covers..
  • Material: Housing made of ABS Plastic and inner made of Aluminum.
Check Stock