ReviewsAxle Nut Socket Set 1point Lisle

CTA Tools 2476 E10 U-Joint Socket - 1/4" Drive , Gray

  • Engineered for use with impact drivers, This axle nut socket can be used for the removal or installation of axle nuts..
  • Manufactured from premium impact grade chrome molybdenum steel construction with corrosion-resistant black phosphate finish for durability..
  • High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off.
  • Large, high-contrast size marking is permanently laser etched and easy to read, even in low light.
  • Meets or exceeds ANSI performance standards. It comes with 1 year quality warranty..
Check Stock

GG Grand General 40232 Chrome Plastic Complete ABS Axle Set (2 Front and 4 Rear) with Standard Hub Caps and Push-On 33mm Lug Nut Covers for Trucks, 4 Pack

  • Made with sturdy high impact ABS plastic material to withstand heat generated by wheel axle.
  • Designed to fit most 10-hole 20 inches, 22.5 inches and 24.5 inches wheels.
  • Easy on-off removal cap to check hub meter, oil seal and level of axle.
  • Set contains 2 front axle covers, 4 rear axle covers, push-on 33mm lug nut covers and a complimentary lug nut cover tool.
Check Stock

Reed Tool HWB Cast Ductile Hydrant Wrench

  • Shower Valve Socket Wrench Set: The Set comes with five double end wrenches, bar handle and a bar wire holder for easy storage. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver..
  • Common Size: This shower valve socket set has 5 pieces of socket with bar handle. Each 125 mm socket has been designed with different sizes helping in quick and easy wrench selection. The socket sizes are 21/32”x 27/32”, 29/32”x 31/32”, 1-1/32” x1-3/32”, 1-5/32”x1-9/32”, 1-11/32”x 1-7/16". The diameter of handle is 9mm..
  • Durable Steel Construction: Made of long lasting durable solid steel and the surface is nickel-plated. 5pcs socket set and afterburner rod are connected with a stainless steel wire..
  • Easy To Use: First, Turn off water supply. Next, Remove faucet handle cap, screw and handle, exposes valve stem and its packing nut. And then, Place correct and of wrench over valve stem onto packing nut, insert handle into opposite side of wrench. At last, Turn clockwise to tighten nut..
  • Which You Need: These plumbing socket wrench set is perfect for removing and installing tub and shower valves, fittings and nuts..
Check Stock

Tusk Racing Axle Block Orange - Fits: KTM 250 SX-F 2005-2012

  • ️Compatibility: Front axle nut cover with Electra Glides, s and Road Kings / Road Glides / Dynas / s / V-Rod (except VRSCR and VRSCF) / Softails (except Deuce, Springer and Rocker). - davidson breakout.
  • ️Fashionable appearance: low-key appearance, stylish design and classic colors, with decorative functions, stylish appearance and improved car grade. Make your car look more dazzling. Hidden front axle hardware makes the appearance look cleaner. - davidson accessories.
  • ️High quality: For for HARLEY Axle Nut Covers is made of high-quality CNC aluminum, sturdy and durable, which maximizes durability and ensures quality. If there is a quality problem....
Check Stock

Axle Spindle Rethreading Tool Set Repair/Cleaning Threading Tools High-Strength Tools Set Easy To Store Thread Restorer Use With 1-1/4\ Socket Mechanic Tool Set For M20,22,24 13/16 3/4 x 20 UNEF 8pc

  • ...Threading tools are suitable for a variety of thread specifications, including axle threads on the spindles of eight common mold sizes:M24 x 1.50, M24 x 2.00, M22 x 1.00, M22 x 1.5, M20 x 1.25, M20 x 1.50, 13/16" x 20UNEF, 3/4" x 20UNEF, and widely applicable, suitable for most vehicles..
  • 【Can Be Used With 1-1/4" Socket Or Wrench & High-Strength/Durable High-Quality Steel Material】Thread restorer mechanic tool sets can be used with 1-1/4" socket or wrench to help better repair/clean shaft threads ,save time and energy. Made of high-quality steel, with high strength and durability, it can provide long-term service and reduce the cost of frequent tool replacement.(package does not contain 1-1/4" socket or wrench. ).
  • 【Easy To Carry/Store】Thread restorer kit is packed in a high-quality plastic box, you can easily take it anywhere, and it is easy to store, and it can be neatly placed in the box after each use, so you don’t worry about losing.Convenient and easy to use..
  • 【Note】This tool can be used with a 1-1/4" socket or wrench, but the package does not include a 1-1/4" socket or wrench..
Check Stock

1/2 Inch Axle Hub Nut Socket 9Pcs Drive Deep Impact Socket Hex Socket Set 29mm 30mm 31mm 32mm 33mm 34mm 35mm 36mm 38mm

  • Strong Durability : Manufactured from 40 chrome steel with heat treated for extra strength and durability..
  • Ensure Safety : There is a drilled head of each socket to locate retaining ball bearing on most breaker bars & impact wrenches to ensure a safe secure....
  • Fully Equipped : 9-Pieces axle hub nut hex socket set, Including 29mm, 30mm, 31mm, 32mm, 33mm, 34mm, 35mm, 36mm, 38mm each one..
  • Application : Heavy duty impact quality fits for 1/2inch drive impact tool..
Check Stock

ABN Double Side Socket 4-Piece Impact Lug Nut Socket Set - 1/2 inch Drive Flip Sockets Thin Wall Tire Sockets

  • [Flip-Style Lug Nut Socket Set] Change tires, repair brakes, or replace ball joints and bushings easily with the ABN Double Sided Lug Nut Socket Locking Lug Nut Removal Tools.
  • Fits 6 of the most common lug nut sizes for removal and installation.
  • [Various Sizes to Meet Your Needs] Lug nut impact socket set includes a 19mm to 17mm socket, a 13/16-inch to 3/4-inch socket, a 7/8-inch to 21mm socket, and a 1/2-inch drive extension bar.
  • [Unique Design] Thin wall wheel sockets feature 6 point flank drive for a snug hold without damaging fastener corners.
  • 3-inch (7.6cm) extension bar and thinner walls ensure clearance into tight recessed wells.
  • [Built to Last] Drop forged, heat-treated chrome-molybdenum steel (CR-MO) provides maximum strength and durability while the black oxide finish resists corrosion.
  • [Convenient Storage] 5.5 x 5 x 2-inch (14 x 12.7 x 5.1cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • Each impact lug socket has laser-etched size labeling for easy identification.
Check Stock

ABN Twist Socket Set Lug Nut Remover Extractor Tool - 5 Piece Metric Bolt and Lug Nut Extractor Socket Tools

  • SOCKETS PROVIDE STRONG GRIP ON LUG NUTS: The ABN Twist Sockets Set Stripped Bolt Extractor Set allows you to bite into and remove worn locking nuts to....
  • USE WITH YOUR TOOLS: 1/2-inch square drive fits your wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (not included).
  • PERFECT SIZE FOR YOUR NEEDS: These lightweight twist socket nut extractors includes 17MM, 19MM, 21MM, and 22MM bolt and nut remover sockets.
  • EASY TO USE: Choose an appropriate twist ratchet socket from the deep twist socket set then hit it with a hammer onto the damaged nut.
  • BUILT TO LAST: HRC 50-53 hardened alloy steel provides this twist socket lug nut remover set with maximum strength and durability.
Check Stock

KCALLSPEE Skateboard Tool, T Skate Tool and Allen Key with Cross Screwdriver Head and 10PCS Speed Washers, Universal for Longboard Skateboard and More

  • 【Quality Material】- All the tools of this skateboard tool kit are made of thicken and premium materials that are durable and won’t easily broken..
  • 【Functional t skate tool】- The skateboard tools has 3 type hexagon sockets and it is equipped with an Allen key with cross screwdriver that meets everything you need. The 3/8" socket is used for hardware, the 1/2" socket for wheels and 9/16" socket for trucks..
  • 【Hardware Speed Washers】- The skateboard tool set comes with 10Pcs standard hardware speed washers which reduce friction between the bearing and axle nut and hangar to provide faster and smoother skateboard ride and increase the bearings life..
  • 【Lightweight & Portable】- The t skate tool for skateboard weighs only 0.26lbs. The Allen key with cross screwdriver can be slid into the t skate tool handle when not in use. They fit most pockets that you can take them to anywhere needed skateboard adjustments..
  • 【Widely Usage】- The skateboard tool is universal that can be used for repairing, tightening, or reassembling the skateboard, longboard, standard skateboard, bike, scooter, cruiser and more..
Check Stock

XtremepowerUS Multiplier Torque Wrench Labor Saving Lug Nut Wrench Cr-v Socket (Torque Wrench W/ 4 Socket) + Case

  • ...ove stubborn lug nuts with minimal effort.
  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1-inch drive sockets.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut, ext....
Check Stock

WINTOOLS 36mm 1/2" Drive 6 Point Axle Nut Socket

  • For removal and installation of axle nut and automatic transmission tail output shafts.
Check Stock