ReviewsAxle Nut Washer

Cardone 66-1009 New CV Constant Velocity Drive Axle Shaft

Proprietary Engineering Processes Ensure That All Cv Drive Axles Meet Oe Form, Fit And Function.
Neoprene Boots Are Designed With Additional Bellows, When Needed, To Resist Bellow Stress And Cracking, Which Is The Leading Cause Of Boot Failure.
An Axle Retaining Nut Is Supplied With Every Unit For A Hassle-Free Installation, Due To The Likelihood That The Original Retaining Nut Is Worn Or....
Cv Drive Axle Measurements Are Validated After Assembly To Ensure A Proper Fit.
Threads Are Precision Rolled To Ensure Proper Fit When Axle Nut Is....

Check Stock

MOSNAI 0.75 Inch 24 Splines Hole Golf Cart EZGO TXT Brake Drum Hub Assembly for 1982-up Electric & 1982-1993 2-Cycle Gas Golf Cart, Replace OEM# 19186G1 19186G1P 17082G2 17298G1, 1-Pack with Nuts

✅【Fit Models】EZGO brake hub fit 1982-up electric golf cart and 1982-1993 2-cycle gas golf cart. Not fit 4 cycle gas EZGO golf cart..
✅【Product Feature】There is a 3/4-Inch center hole with a 24-tooth star spline, the hub is held in place by a castellated nut (5/8-Inch x 18tpi) and a thick (118-Inch) flat washer..
✅【Replace OEM Part】This EZGO TXT rear brake drum/hub is a replacement for the earlier hub & drum and has the star spline instead of the straight key.Replace OEM# 19186G1, 19186G1P, 17082G2, 17298G1..
✅【Note】 This EZGO TXT drum brake will NOT operate with a keyed axle/hub interface. Hub spline and Rear Axle Shaft Spline should be matched tight. When one of them is wear out, both of them should be replaced at the same time. Other wise the hub spline will strip soon..
✅【Package Content】1*EZGO rear hub with drum washer, 4* chrome lug nuts. Any problem please feel free to contact us, we are there for YOU !.

Check Stock

56 Pieces Skateboard Truck Hardware Kit Includes 8 Pieces Spacers, 8 Pieces Axle Nuts and 40 Pieces Speed Rings for Skateboard and Longboard

Package quantity: package comes with 8 pieces skateboard spacers, 8 pieces axle nuts and 40 pieces speed rings, enough quantity to fit on a skateboard or longboard and improve bearing performance.
Speed spacer: our skateboard spacer allows you to rotate the axle nut downward all the time, thus reducing slop and increasing bearing life, durability and performance.
The +/ -0.02 mm precision tolerance ensures nicely fit and very fast bearing at a time.
Speed rings: our speed rings can increase speed and extend longer bearing life by reducing friction among the bearing, axle nut and hangar.
Axle nuts: our axle nuts will prevent your wheels from falling off, the more you change your wheels and bearings, the more the axle nuts wear out and lose its tightness.
These standard size axle nuts will keep you locked up and will fit most skateboard/ longboard trucks with 8 mm axles (in fact, each truck has a standard 8mm axle size).
These axle nuts have thread dimensions of 5/16 inch.
Wide application: this skateboard tool kit can be applied for most skateboard/ longboard trucks, they are strong and with proper installation, are resistant to stripping.

Check Stock

HVAZI Metric M2 M2.5 M3 M4 M5 Nylon Phillips Pan Head Screws Nut Washer Assortment Kit (Black)

High Quality 510PCS Metric M2 M2.5 M3 M4 M5 Black PA66 Nylon Phillips Pan Head Screws Hex Nut Flat Washer Assortment Kit.
Thread Diameter: M2/(2mm) with Thread pitch: 0.4mm.
Screw thread: M2.5/(2.5mm) with Thread pitch: 0.45mm.
Screw thread: M3/(3mm) with Thread pitch: 0.5mm.
Thread Diameter:M4/(4mm)with Thread pitch: 0.7mm.
Thread Diameter:M5/(5mm)with Thread pitch: 0.8mm.
The assortment contains:M2x5mm(20PCS),M2x8mm(20PCS),M2 Hex Nut (40PCS),M2 Flat Washer(40PCS).
M2.5x6mm(20PCS),M2.5x10mm(20PCS),M2.5 Hex Nut (40PCS),M2.5 Flat Washer(40PCS).
M3x6mm(20PCS),M3x10mm(20PCS),M3 Hex Nut (40PCS),M3 Flat Washer(40PCS).
M4x8mm(15PCS),M4x10mm(15PCS),M4 Hex Nut (30PCS),M4 Flat Washer(30PCS).
M5x10mm(10PCS),M5x20mm(10PCS),M5 Hex Nut (20PCS),M5 Flat Washer(20PCS).
All products are made of durable nylon, Strong,anticorrosive.
Type specification complete, the quality is reliable,Easy to install and durable to use.

Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

(2-Pack) AR-PRO 6-Inch Boat Trailer Jack Wheels - Universal Fit Black Plastic Caster Wheels - Includes All Mounting Hardware - Suitable for Boat Trailer Jacks with 1 or 2 Wheels

1 PAIR OF CASTER WHEELS FOR BOAT TRAILER JACK - This is a universal replacement for boat trailer jacks. Wheel dimensions are 5 5/8 diameter (6-inch nominal diameter), 2 inches width, and a 5/8 bore hole.
DURABLE PLASTIC CASTER WHEELS - Complements the marine boat trailer jack’s durability. Can withstand constant water exposure and can resist wear and abrasion from heavy use. Each caster wheel can support up to 1,200 lbs.
INCLUDES BOLTS, NUTS, BUSHING, AND WASHERS - This pack includes 2 caster wheels, 2 short axle bolts (with 2 nuts, 2 washers, and 2 sleeves), and 1 long axle bolt (with 1 nut, 1 washer, and 1 sleeve).
CORROSION-RESISTANT HARDWARE - All mounting hardware has a corrosion-resistant finish for enhanced longevity in coastal environments.
SUITABLE FOR UNITS THAT USE 1 OR 2 WHEELS - Includes hardware for boat trailer jacks that only require one 6-inch caster wheel and units that use 6-inch dual wheel casters.

Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

Alltrade 648471 1/2' Dr x 34mm Axle Nut Socket

For easy removal of front wheel drive Axle shaft nuts.
Impact grade 6-point socket. Extra deep to fit various axle lengths.
For easy removal of front wheel drive axle shaft nuts.

Check Stock

Powerbuilt 647079 35mm Axle Nut Socket , Black

For easy removal of front wheel drive Axle shaft nuts.
Impact grade 6-point socket. Extra deep to fit various axle lengths..
For easy removal of front wheel drive axle shaft nuts.
Impact grade 6-point socket made from chrome molybdenum steel.

Check Stock