ReviewsAxle Puller

OTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case

  • OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts.
  • Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility.
  • Includes: 1155 Slide Hammer with 5 lb. hammer and 'T' handle, 7372 - Rear Axle Pulling Attachment, 24544 - 3-Way Cross Head, 24545 - Cone, 27241 - 2-Way Cross Block, 27315 - Puller Hook Attachment.
  • 34698 - 3ea. Pulling Jaws for internal/external use.
  • 4148 - 3ea. 6-1/2 inch Pulling Jaws for internal/external use.
  • 32054 - 3ea. 2-3/8 inch Pulling Jaws for internal use.
  • 05378 - Grip Wrench Adapter w/single lead (wrench not included).
  • 205377 - Dent Puller, 309321 - Forcing Screw.
  • durable blow-molded case keeps set components contained and organized.
Check Stock

LainKeen Inner CV Joint Puller Front Wheel Drive Axle Half Shaft Removal Tool Kit with Heavy Duty 10 Pounds Slide Hammer, 63mm 48mm CV Joint Fork Adapter Attachments

  • Remove CV Axle Easily: Using the CV joint puller, you can easily pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts..
  • Heavy Steel Slide Hammer: The slide hammer and the VC join fork is made of heavy duty steel, which can withstand huge pressure without deformation, is not easy to break. slide hammers are heavier and larger than normal ones, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, the length is 19.5 inches, so it can generate greater pulling force and work easier..
  • Efficient Slide Hammer: The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm are suitable for most veh....
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts + Axle Alignment Shims 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components.
  • Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break.
  • Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently.
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have....
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

OEMTOOLS 25749 Wheel Hub Removal Tool, Green Hub Bearing Removal Tool, Hub Buster Tool Prevents Axle Removal or Damage, Works for 5, 6, and 8 Lug Hubs

  • Clean Break: Remove your damaged or frozen hub assembly without any risk of damaging the axle with this hub assembly removal tool.
  • Your Go-To Tool: The hub puller tool is designed to work with any configuration of axle-bolted hubs, including 5, 6, and 8 lug hubs.
  • If the Hub Fits: Hub removal is simplified with the 2-5/8” center-to-center hole pattern of this wheel hub puller, making installation easy and speeding up the hub removal process.
  • Shielded With Steel: Trust in your wheel hub remover’s longevity with its 3/4" steel backing plate and reinforced striking plate, giving it the strength to endure any wear and tear.
  • A Tool For the Ages: This wheel hub remover will resist rust and corrosion thanks to its high-quality steel construction, resulting in equipment you can rely on long-term.
Check Stock

OMT Inner CV Axle Puller Tool Set with 5/8"-18 Slide Hammer & Adapter | Inner CV Joint Removal Tool Kit | Front Wheel Drive Axle Puller Set Compatible with Taurus Sable FWDs from 1986 to 2021

  • PULL CV JOINTS & AXLES: This CV joint puller tool set by Orion Motor Tech is compatible with Ford Taurus and Mercury Sable models from 1986 to present, loosening and removing their front wheel drive axles and hidden retaining rings in minutes.
  • MULTIPURPOSE SLIDE HAMMER: Our slide hammer weighs 7 pounds for extra strength to give you a straight and even pull for damage-free removal of the axle assembly.
  • its threading also lets you use it with other 5/8"-18 adapters to deal with other makes and models or to handle other work around your engine.
  • DURABLE PULLER ADAPTER: The U-shaped CV joint fork has a 2-inch opening and 2.4-inch depth to firmly lock onto your Sable or Taurus axle assembly, making removal of stuck CV joints a cinch.
  • QUICK & EASY OPERATION: These automotive tools work together to provide straight and even force so your constant velocity axle pops out smoothly, leaving the roller bearing inside the joint and the rest of your vehicle untouched.
  • BUILT TO LAST: Made of premium AISI 1045 medium carbon steel, our CV joint removal set provides strong and dependabl....
Check Stock

Keycap Puller for Mechanical Keyboard Stainless Steel Keycap Remover Tool Fixing Keyboard Black

  • Design and realize of the dual purpose key pull and axle pull..
  • Made of high quality steel, wire style keycap puller is more suitable for mechanical keyboard owner..
  • Wires can bend outward to fit onto every key except the spacebar..
  • A necessary keyboard accessory if you are planning on removing all of the keys for an intense cleaning..
  • Make the job easier, this key puller has a plastic handle with two steel loops to catch and pull keys, speed up key removal compact..
Check Stock

Keyboard Puller Stainless Steel Keycap Remover Tool-for Mechanical Keyboard for Removing Fixing Keyboard Tools (Keyboard Puller 01)

  • Multifunctional designthe dual purpose key pull and axle pull tool for mechanical keyboard.
  • The keycaps and mechanical shafts can be removed more quickly and safely, the necessary tools for cleaning and repairing mechanical keyboards.
  • Compatible for most mechanical keyboards including Cherry MX, Alps, and Topre switches.
  • Made of high quality steel keycap puller is not easily damagedandthis key puller has a plastic handle with two steel loops to catch and pull keys, speed up key removal compact.
Check Stock

6575 Hub Grappler Kit Used on Vehicle Wheel Hub and Bearing Removal & Installation

  • 「FUNCTION」This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 「A MUST HAVE」The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time.
  • 「EASY TO USE」 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation..
  • 「NICE DESIGN」 Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners..
  • 「UNIVERSAL FITS」 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
Check Stock

GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set - 41710

  • Rear-axle bearing puller set for use with most domestic cars.
  • Includes 3 pullers for greater versatility.
  • Packaged in durable, blow-molded case with easy-to-use instructions.
Check Stock