ReviewsAxle Tools

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (3) rear axle bearing removers and (1) carrying case for your convenience.
Check Stock

Mitas E07+ Enduro Trail Tire Black Size 170/60B17

  • NO MORE PINCHED TUBES! - The powerful rack and pinion system pushes the tire over the rim, eliminating the chance of a pinched inner tube during installation. Our dirt bike tire changing tools are designed to make the task of changing tires easy and convenient..
  • QUICK AND EASY - The Baja No Pinch tire tool is designed to simplify the installation of your dirt bike tires. Our favorite customer is a ten-year-old boy who uses the minibike kit to install his own tire on the trail! It only shows that our tire changing tool sets are a great investment for both the experienced mechanic and for those who just want to learn how to install dirt bike tires..
  • TRAIL FRIENDLY - Don’t get stuck on the trail. Our tire changing kit weighs less than 2.5 pounds and breaks down into a few parts (the longest part being 12 inches) and it can easily roll into your trail bag or fanny pack. You can add ours to your dirt bike tool kit and you will be prepared for any tire change..
  • AMERICAN GRADE QUALITY - Our dirt bike tire changing tools are designed in Southern California, we use aircraft grade aluminum alloy and black oxide treated steel. We CN....
Check Stock

DDCSV3.1 3 Axis Offline CNC Motion Controller Handwheel G Code PLC Control System Electronic Handwheel with Emergency Stop Function

  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version. ARM9 main control chip,FPGA core algorithm chip. 16 opto isolated digital inputs,3 opto isolated digital outputs..
  • 3 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle. Analog spindle control 0-10V spindle control (can be modified as PWM output). Jog function for each axle (continuous, step, defined distance). 24VDC power input, minimum Current is 0.5A..
  • 5 inches TFT screen, resolution ratio: 480x272,17 operation keys. USB flash disk support for G code file input,no size limited of the G-code file. 1GB internal memory and support standard MPG..
  • Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
  • Drive output type, strong anti-interference ability, long-distance transmission. Applications: CNC machine tools, printing machinery and other zero correction and signal segmentation..
Check Stock

DDCSV3.1 Standalone Motion Controller off-line 100 Pulse MPG Handwheel Emergency Stop for CNC Router Engraving Machine (3-Axis with MPG)

  • 16 opto isolated digital inputs,3 opto isolated digital outputs.Analog spindle control 0-10V spindle control (can be modified as PWM output).Drive output type, strong anti-interference ability, long-distance transmission..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.5 inches TFT screen, resolution ratio: 480x272,17 operation keys..
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle.24VDC power input, minimum current is 0.5A. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
  • ARM9 main control chip,FPGA core algorithm chip.1GB internal memory and support standard MPG.Jog function for each axle (continuous, step, defined distance)..
  • USB flash disk support for G code file input,no size limited of the G-code file.Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved.Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation..
Check Stock

Axle Spindle Rethreading Tool Set Repair/Cleaning Threading Tools High-Strength Tools Set Easy To Store Thread Restorer Use With 1-1/4\ Socket Mechanic Tool Set For M20,22,24 13/16 3/4 x 20 UNEF 8pc

  • ...ool set can be used to repair/clean the axle threads on the spindle, effectively clean the rust and dirt on the thread, repair the worn thread,and recover the clear thread line. It is the best tool for cleaning axle threads..
  • 【Suitable For a Variety Of Thread Specifications & Wide Range Of Applications】Threading tools are suitable for a variety of thread specifications, including axle threads on the spindles of eight common mold sizes:M24 x 1.50, M24 x 2.00, M22 x 1.00, M22 x 1.5, M20 x 1.25, M20 x 1.50, 13/16" x 20UNEF, 3/4" x 20UNEF, and widely applicable, suitable for most vehicles..
  • 【Can Be Used With 1-1/4" Socket Or Wrench & High-Strength/Durable High-Quality Steel Material】Thread restorer mechanic tool sets can be used with 1-1/4" socket or wrench to help better repair/clean shaft threads ,save time and energy. Made of high-quality steel, with high strength and durability, it can provide long-term service and reduce the cost of frequent tool replacement.(package does not contain 1-1/4" socket or wrench. ).
  • 【Easy To Carry/Store】Thread restorer kit is packed in a high-quality plastic box, you can easily take it anywhere, and it is easy to store, and it can be neatly placed in the box after each use, so you don’t worry about losing....
Check Stock

CHIMONA Bike repair stand for maintenance, adjustable heavy duty bike work stand with quick release buckle, bicycle mechanics stand with bike clean tools, bike workstands for e-bike, mtb, road bike

  • ...at are otherwise awkward to clamp on a regular bike bicycle repair stand. Single Point Quick Release mount but stable enough, the bike work stand repair allows both professional mechanics and home enthusiasts to work on their bikes with greater control and precision than ever before.
  • 【Free tool tray and bike clean tools】A tool tray and bike clean set are provided FREELY in the carton of bike maintenance stand, which could be installed on the bike maintenance stand through the reserved holes. It can accommodate various maintenance tools and small parts such as screws and nuts, at your fingertips when you need it. Bike clean tools would help a lot when you need to clean your bike.
  • 【Lifetime after-sale Warranty】If you are not satisfied with the CHIMONA bicycle stand repair, you can return it for any reason within 360 days after purchase, And we prepared enough replacement parts for Lifetime after-sales. Any questions please contact us for advice, your satisfaction has always been our service tenet.
Check Stock

CMTOOL Brake Spring Tool for Semi Trucks, 5081 S-Cam Air Brake Spring Tools Replace Brake Shoes, Heavy Duty Tractors and Semi Trailers Brake Spring Tool, Steel Construction Truck Air Brake Tools

  • 1.【Brake Spring Tool for Safely Replacing Brake Shoes】This s-cam air brake spring tool is a better alternative to a vise grip, pry bar or screwdriver, and is used to safely replace brake shoes on heavy-duty tractors, trailers and semi-trucks..
  • 2.【Time-Saving and Efficient Truck Air Brake Tools】There are some pliers similar to car brake spring calipers, but in most cases, you can't use them in close proximity to the brake chambers or suspension. The semi brake spring tool does not have this problem, and it will not take up too much space in your toolbox..
  • 3.【Wear-Resistant and Corrosion-Resistant Semi Brake Tool】The heavy-duty semi brake spring tool is made of high-quality hard steel material, which has excellent performance of anti-wear and corrosion resistance and is durable..
  • 4.【Easy-to-use Air Brake Spring Removal Tool】No additional tools such as vices and screwdrivers are needed. Just hook the fixed spring ring and press down on the shaft. The semi trailer brake tools only take a few seconds to easily remove and install the shoe spring..
  • 5.【S Cam Brake Tool with "V" Structure】The semi truck tools with a "V"-shaped structure at the end makes full use of the principle of leverage. The Lever action on the axle makes the job easier. L....
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ... 48mm fit most vehicle models, have wide use.
  • Combinnation Kit: This kit include: 1 heavy duty slide hammer.
  • 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry, and we offer 12 months warranty, we will refund or replace, if the tool have any quality problem.
Check Stock

Boquite CNC Motion Controller, DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit

  • 16 opto isolated digital inputs,3 opto isolated digital outputs. Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.
  • Analog spindle control 0-10V spindle control (can be modified as PWM output). 4 axle motor control differential Pulse and direction output signal,maximum.500Khz per axle.
  • ARM9 main control chip,FPGA core algorithm chip. 5 inches TFT screen, resolution ratio: 480x272,17 operation keys.
  • Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation.
  • After-sale Service. We are confident in our products and stand behind them 100%. Just reach to us with any questions or concerns and we will be happy to help in less than 24 hours!.
Check Stock

MIXPOWER 1/2' Drive Deep Impact Socket CR-MO, 33 mm, METRIC, 6 Point, Axle Nut Impact Grade Socket for Easy Removal

  • 【Premium CR-MO】Made from premium impact grade chrome molybdenum steel with black phosphate finish..
  • 【High-torque】Radius corner design, 6-point opening reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • 【Application】 Engineered for use with impact drivers. This axle nut socket can be used for installing, dismantling and repairing wheel or axle nuts on vehicles..
  • 【Laser Marking 】High-contrast size marking is permanently laser etched and easy to read, even in low light..
  • 【Service Guarantee】All MIXPOWER Tools meet or exceed ANSI performance standards. It comes with 1 year quality guarantee..
Check Stock

MIXPOWER 1/2' Drive Deep Impact Socket, CR-MO, 35 mm, METRIC, 6 Point, Axle Nut Impact Grade Socket for Easy Removal

  • 【Premium CR-MO】Made from premium impact grade chrome molybdenum steel with black phosphate finish..
  • 【High-torque】Radius corner design, 6-point opening reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • 【Application】 Engineered for use with impact drivers. This axle nut socket can be used for installing, dismantling and repairing wheel or axle nuts on vehicles..
  • 【Laser Marking 】High-contrast size marking is permanently laser etched and easy to read, even in low light..
  • 【Service Guarantee】All MIXPOWER Tools meet or exceed ANSI performance standards. It comes with 1 year quality guarantee..
Check Stock