ReviewsBackdraft Dampers

X-BULL Winch Damper Dampener Cable Cushion 4x4 Recovery Safety Blanket Car Off-Road Safety Blanket with Storage Pocket and Reflective Strips

Winch rope dampers are universal for all winch cables and straps up to 3 inches wide.
Reduced risk of injury: If the winch rope or strap fails, winch dampers help reduce the risk of injury due to recoil, meeting the requirements of shock absorbers for four-wheel drive racing cars.
Safety vest: Durable vinyl construction with two pockets for easy storage of accessories, used as a winch rope hook or storage bag for off-road recovery accessories for added weight. Also can be worn as a safety vest..
Reflector strip: reflector strip increases visibility, high visibility orange reflector strip. Make the process safer.
About warranty: Winch dampers have a lifetime of technical support and a one-year limited warranty. If you have any questions during the purchase, please feel free to contact us, we will provide the most professional and timely service..

Check Stock

TOP NOTCH PARTS TOP ENGINE MOUNT RUBBER DAMPER KIT FITS YAMAHA GRIZZLY 660 2002 2003 2004 2005 2006 2007 2008 YFM660

REPLACES OEM NUMBER 5UG-21486-00-00 90105-06696-00 90105-10300-00.
. PURCHASE INCLUDES: 2X NEW ENGINE DAMPERS. 2X BOLTS. 1X MOUNTING BOLT.
PARTS FIT: 2004 - 2007 YAMAHA RHINO 660..

Check Stock

Broan 8" Universal Automatic Make-Up Air Damper with Pressure Sensor Kit

8″ Universal Automatic Make-Up Air Damper with Pressure Sensor Kit.
Interlocked make-up air damper systems meet IRC Code requirements for make-up air with range hoods over 400 CFM.
Interlocked make-up air systems avoid wasted energy associated with barometric solutions and do not let unwanted air into the home during heating or cooling activities so air pressure is equalized for a well-balanced environment.
Fresh air wall caps are required for use with Make-Up Air Dampers.
Interlocked make-up air dampers provide outside air when required to keep the air in the home fresher by allowing the range hood to operate at optimum levels.
Balance indoor air pressure by providing interlocked make-up air without requiring a direct wire connection between the range hood and the damper.
Instead a sensor is attached to the exhaust duct to detect if the range hood is operating.
Slave dampers (MD6S, MD8S or MD10S) are interlocked to the main automatic or universal make-up air damper and open in unison for synchronized operation..

Check Stock

Hon&Guan 10 inch Backdraft Damper, One-Way Airflow Ducting Insert Backflow Preventer Duct Draft Blocker, HVAC Inline Fan Vent

【Material】The 10 inch backdraft damper and the flap leaves is made of a Galvanized steel, the Axis are made of aluminum, while the spring are made of carbon steel..
【Installation method】The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
【Wide applications】Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications..
【Lightweight valve wings】The valve wings open under the pressure created by the airflow.
when the air flows in the opposite direction, it is automatically closed under the action of the spring, so as to cut off the flow..
【Backdraft Shutter】Hon&Guan Draft Blocker designed to improve ventilation by preventing air from re-circulating when the fans are not in use, rubber ring ensure 100% closure and quiet closing..

Check Stock

iPower 4 Inch 8 Feet Non-Insulated Flex Air Aluminum Foil Ducting and Backdraft Shutter Damper for HVAC Extractor Fan Vent, Range Hoods, 2 Clamps Included

Ducting size: 4 inches (diameter) x 8 feet (length) when fully extended. Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃). A pair of 4 inch stainless steel metal clips makes the installation firmer.
Fire proof coating ducting: Flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance.
Backdraft Shutter Damper: Made of a Galvanized steel. Withstand temperatures from 14 to 140 °F. Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
Low noise design: An internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for backdraft shutter damper horizontal installations so that it can open and close optimally.
Wide applications: A pair of metal clamps makes ducting and damper securely fixed. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.

Check Stock

Suncourt ZoneMaster Fully Adjustable Motorized Airflow Control Zone Damper, UL Listed 24VAC/20VA Plug-in Transformer Included, Compatible with Any 24 Volt Thermostat, Normally Open – 6', Silver

... low over time. With a 3-year manufacturer’s warranty, this zone damper is built tokeep you comfortable year after year..
TOTAL ZONE CONTROL –This ZoneMaster gives you complete individual control over the climate in your space. Customize and maintain the temperature in specific rooms of your home with these zone dampers. Easily integrate it with an existing zone controller system!.
FRESH AIR INTAKE – Improve the quality of air in your home by installing a fresh air intake system with a Suncourt motorized airflow damper. Once damper is closed, it will block drafts, airflow and odors from flowing through. Suncourt’s dampers boast a patent-pending coupler with 0°- 90°adjustment capabilities, making them perfect for fresh air intake applications..
ENERGY EFFICIENT DESIGN – Take control of your comfort and preserve energy by using these automated duct dampers. When power is not supplied, the damper stays open allowing for air to flow through..
UL LISTED 24 VAC TRANSFORMER INCLUDED - Simple and user-friendly, this damper comes with a UL listed 24VAC plug-in transformer included and can operate as a standalone device using the included transformer..

Check Stock

iPower 6 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 6\

Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
Material: The 6 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.

Check Stock

2 Front Hood Gas Lift Supports Struts Shocks Springs for 2004-2012 Nissan Titan or 2004 Nissan Pathfinder or 2005-2013 Nissan Armada

Brand New High Quality OEM Replacement Front Hood Lift Support Prop Rod Struts Spring Shocks Dampers Set of 2.
Qty: 2 | Placement: Front Hood | Fits for 2004-2012 Nissan Titan or 2004 Nissan Pathfinder or 2005-2013 Nissan Armada.
Intercharge Part Number, 4182,SG425003,8196154,654707S000. Consistent performance in all weather conditions.
Best replacement as your worn-out factory lift supports, also known as charged gas shocks, struts, props, dampers, arms.
Worry-Free 12+1 MONTHS WARRANTY. Product replacement/refund service will be offered if any quality defects occur, just contact us timely!.

Check Stock

V-Belt Power Steering Kit Replacement for Small Block Ford 289 & 302 Engines with Electric Water Pump and 4 Bolt Factory Balancer

Billet Aluminum V-Belt System Replacement for Small Block Ford 289 and 302 Engines with Electric Water Pump.
Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
Includes all brackets and pulleys needed for installation. Does NOT included Electric Water Pump, Power Steering Pump, or Alternator.
Uses 4 Bolt Factory Damper and Saginaw Style Power Steering Pump with Keyway Shaft.
Will not work with 351W Engines or 3 bolt factory dampers or aftermarket dampers. We do offer kits for all of these options however..

Check Stock

iPower 4 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 4", HVAC Extractor Fan Vent, Range Hoods

Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
Material: The 4 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathro....

Check Stock

14'w X 6'h 2-Way-Flat Stamped Steel - Vent Cover - Grille Register - Sidewall or Ceiling - High Airflow - White [Outer Dimensions: 15.75'w X 7.75'h]

14"w X 6"h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 15.75"w X 7.75"h - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE.
LOUVERED Supply Grille for Sidewall or Ceiling Application with SmoothGlide Technology, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet Lever.
Easy Unrestricted Air Flow Deflection For Your HVAC System - 1/2 Inch Spaced Fins.

Check Stock