ReviewsBacker on Cement Board Screws

48 Pieces Heavy Duty Toggle Bolts, Wall Anchors & Screws for Drywall, 1/4 Inch, 1/8 Inch, 3/16 Inch (3 Sizes)

Screws and Drywall Anchors Heavy Duty: These anchors and screws can be used on hollow brick, gypsum board, cement fiber board, wood board, and other hollow materials.
Perfect For: The heavy duty drywall anchors and screws can be used to install lighting fixtures, curtain rods, and photo frames.
3 Sizes: The largest drywall anchor screw measures 1/4 x 3 inches, the medium size measures 3/16 x 3 inches, and the smallest measures 1/8 x 2 inches.
Durable Material: These toggle bolts and anchors are made with a plated carbon steel and coating which is perfect for hanging heavy items on drywall such as coat racks and flower pot..
What’s Included: This set includes 24 of 1/8 inch wall anchors.

Check Stock

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..

Check Stock

Norske Tools NDHSI113 1/2 inch (12mm) Industrial Quality Vacuum Brazed Diamond Drill Bit Hole Saw for Tile, Stone, Glass, Brick, Block and Cement Backer Board

Utilizes high grade diamonds and heat-resistant vacuum Braze to deliver best-in-class performance for extreme life.
For drilling holes in abrasive materials including tile, stone, glass, brick, block, and cement backer board.

Check Stock

2 inch Carbide Grit Hole Saw, 1-1/2 Inch Cutting Depth for Brick, Concrete Block, Stucco

【PACKAGE】This Carbide grit hole saw kit includes 4 3/8 Inch(111mm) Black SAW BLADE, 1 SDS PLUG MANDREL, 1 DRILL BIT, and 1 CARBIDE TIPPED PILOT DRILL BIT to satisfy your different needs.
【UNIVERSAL APPLICATION】This Carbide grit hole saw is your ideal choice for brick, concrete block, fiber cement siding , backer board, stucco & old plaster.
【EASIER TO CUT】Carbide grit hole saw cuts through a wide range of abrasive materials.
【100% Satisfaction Guarantee】We are dedicated to providing every customer with satisfying products and services.If you are not satisfied with our product, we will provide a free return or refund for you.

Check Stock

Uncoupling Membrane 1/8” Underlayment – 108 sq. ft. - Waterproofing Tile or Stone Flooring Bathroom, Shower, Sauna, Steam Room Floor – Water Proof & Crack Isolation – Snap Products

...preme moisture barrier along with helping prevent cracking and fractures of your tiles and grout work..
Multiple Applications: Our dimple uncoupling membrane can be used with any thinset mortar. The professional-grade polyethylene sheet and anchoring fleece underside can easily be laid on top of concrete, wood, OSB, backer board, cement or cement board, or gypsum. For use in your bath, shower, sauna, steam room, master bath, hallways, or anywhere you want to lay stone or tiles.
Brand Name Quality: Snap Products is a California based American home improvement materials company. We hold all of our products to the same high standard as any other American manufacturer. This uncoupling and waterproofing membrane with an integrated bonding fleece roll is made with new, virgin polyethylene synthetic polymer. This high strength material provides strong adhesion and multi-layered waterproof protection..
Simple Installation: The underside anchoring fleece allows direct application on various surfaces with any unmodified thin set mortar. Super thick, strong, and durable this 0.125” thick membrane is designed to work with all types of substrate and stone or tile floors. It also provides sound reduction and control, a thermal brea....

Check Stock

Get Out! Doorway Hangboard Rock Climbing Fingerboard Climbing Training Board Climbing Grip Board –White and Black Swirl

... holds to tone your upper body by targeting contact finger strength and body tension core strength.
[Easy to Install]: Mounting hardware and installation instructions included with this hang board climbing board.
If installing on wall without studs, we recommend using a plywood backer board (not included) to mount the finger pull up board climbing fingerboard hangboard.
[Exercise Anywhere]: Use climbing trainer board for improving your core strength in your garage, above a doorway, or on wall studs.
14 pockets with different depths and widths (1, 2, 3, 4 fingers - tips to 2nd joint) for exercises including dead, bent-arm, and offset hangs, standard, offset, and one-arm pull-up, L-hang, and front lever.
[Built to Last]: Climbing hang board is crafted from the same sturdy and dense material as most hand and foot holds on rock walls found in most indoor gyms.
Ergonomic holds of this hangboard fingerboard taper outward and downward to reduce risk of injuries.
[Perfect Size]: Climbing hang board tapers from top to bottom from 2 inches to 1 inch (5.1cm to 2.5cm) for better forearm clearance.
Training board rock climbing measures 19 inches (48.3cm) at its widest and 8 inches (20.3cm) at its highest.

Check Stock

YIJIANG 5 PACK 4 inch Super Thin Diamond Saw Blade 4 Tile Blades Cutting Disc Wheel for Cutting Porcelain Ceramic Tiles Granite Marble Works with Tile Saw and Angle Grinder

【SIZE】Outer Diameter: 105mm(4 inch). Thickness: 1.2mm..
【COMPATIBLE MODELS】Suitable for most tile saws and hand-held angle grinders with a 4/5" or 5/8" Arbor. It can be used on different types of angle....
【FAST & SMOOTH CUTTING】X teeth offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling..
【HIGH PERFORMANCE】The Turbo-Mesh rim provides extremely smooth cutting finish on porcelain, marble, and ceramic tile. The Mesh rim design allows....
【WIDE APPLICATION】It's designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, cement backer board, etc. It....

Check Stock

Dremel US20V-01 20V MAX Cordless Compact Saw Tool Kit (Renewed)

Benefits: This 3-in-1 compact saw allows for flush cutting, plunge cutting, and surface preparation. Cuts nearly all materials such as wood, metal, PVC, masonry, and more.
Includes: The kit includes Swiss-made, high-quality engineered 4-inch US500 premium carbide wood and plastic wheel. it also includes a 3.5-inch US510 metal cutting wheel. Abrasive material for applications such as copperpipe, conduit, coated wire shelving, thin sheet metal, threaded rod, sheet aluminum, and more.
Battery Life: 20V MAX Lithium-Ion battery delivers long-lasting consistent power for smooth finished cuts.
Diamond Tile Cutting Wheel: Kit includes the 3.5-inch US540 Diamond tile cutting wheel. Diamond-coated for cutting wall tile, floor tile, porcelain, slate, stone, and cement backer board.
Adjustable Depth Guide: Adjustable depth guide provides additional control for cuts up to 3/4-inch into materials such as wood, metal, tile, plastic, laminate, masonry, and more.

Check Stock

1 1/4 Inch Diamond Hole Saw Drill Bit Ceramic Porcelain Tiles Quartz Granite Countertop Glass Bottle 1.25 inch Tile Drill Bit 1-1/4 inch Hole Cutter

1-1/4 inch Premium Quality Diamond Hole Saw Solid Steel Body: Spins True, Cools Better, Lasts Longer.
Standard 3/8" Shank for Standard Drills - No Special Tools Needed.
Drills Through Quartz, Granite, Porcelain, Ceramics, Tiles, Glass High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board.
Increased Body Height for Deeper Cuts Clean, Precise, Fast, and Dustless Cuts Every Time.
Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Glass Fish Tank Kitchen Bathroom Shower Faucet Installation.

Check Stock

Heated Floor Uncoupling Membrane 1/4” Underlayment – 108 sq ft – Electric Heat for Tile or Stone Flooring – Home Bathroom, Shower, or Sauna Room Floor – Water Proof & Crack Isolation – Snap Products

...lectric floor heating cable and thermostat..
Multiple Applications: Our radiant heated dimple uncoupling membrane can be used with any thinset mortar. The professional-grade polyethylene sheet and anchoring fleece underside can easily be laid on top of concrete, wood, OSB, backer board, cement or cement board, or gypsum. For use in your bath, shower, sauna, steam room, master bath, hallways, or anywhere you want to lay stone or tiles..
Brand Name Quality: Snap Products is a California based American home improvement materials company. We hold all of our products to the same high standard as any other American manufacturer. This uncoupling and waterproofing membrane with an integrated bonding fleece roll is made with new, virgin polyethylene synthetic polymer. This high strength material provides strong adhesion and multi-layered waterproof protection..
Simple Installation: This tile underlayment membrane has an easy snap grid that allows heated cable to easily snap into place, while increasing heat retention. The underside anchoring fleece allows direct application on various surfaces with any unmodified thin set morta....

Check Stock

GoBoard® Waterproof Backer Board Kit 6 Sheets | Easy Installation Shower Wall Board

Six Sheets of GoBoard backer board (3' x 5' x 1/2" sheets) 90 SF of Coverage.
Four Tubes of KBRS ShowerSeal Polyurethane Sealant (10.1 oz. each) & One 2.5 lb. Bag of Screws.
Fast and Easy to Install | 100% Waterproof (built-in).
Easy to Cut in the Field with a Utility Knife | Tile Same Day.

Check Stock