ReviewsBalanced Pressure Filler

QWORK Pot Filler Faucet Brass Commercial Wall Mount Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles

  • LEAD-FREE BRASS BODY: QWORK pot filler body is made from high quality brass (lead content below 0.25%), safe for drinking water. High Quality Brass Material, Ensures Durability and Easy Cleaning..
  • DUAL VALVES & 360° ROTATABLE: Double handle double valve design, control the flow switch with any handles. PLEASE turn off the both handles after finish using. Faucet Swivels 360 Degrees allows yourself to multitask by freeing up your kitchen faucet and sink for cleaning vegetables or rinsing pasta or even filling another two pots at the same time! The 20" length of this pot filler is designed to reach all stove burners for filling pots without much labor..
  • 2.2 GPM HIGH QUALITY AERATOR: Equipped with high quality Aerator provides a steady pressure and straight consistent 2.2 GPM water flow.
  • 100% factory high pressure and low pressure tested..
  • EASY TO INSTALL: Single hole installation, standard 1/2 NPT connection thread, fits most water supply line, use for cold water OR hot water (maximum water temperature should not exceed 90℃)..
  • 100% SATISFIED SERVICE: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you..
Check Stock

Keg in the Closet

  • Allows you to hook up your Tapcooler counter pressure bottle filler to your keg, vs the faucet..
  • Includes close to 78 in. of tubing so you'll have plenty of clearance from your Keg to your bottling area..
  • Included valve hooks right up to the Tapcooler and is to open and close as you fill your bottles..
  • Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling!.
Check Stock

Stant 12043 Cooling System Pressure Tester Threaded 'Cap' Adapter, 1 Pack

  • Stant engine cooling system pressure tester adapters make it quick and easy to hook up a Stant cooling system pressure tester to just about any Automotive cooling system.
  • Many vehicles, due to manufacturer specific cooling system designs, require unique adapters to connect the vehicle's coolant filler neck to the coolant pressure tester.
  • 12043 is a threaded adapter that allows the cooling system pressure tester to work on 2013 Ford escape and Fusion models as well as select Mazda vehicles.
Check Stock

CWM IMLEZON Wall Mount Pot Filler Faucet Matt Black Commercial Stainless Steel Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles, 22” (00101)

  • Constructed by 1.5mm thick SUS 304 stainless steel tubes.
  • Equipped with solid brass ceramic cartridge.
  • pure stainless steel construction with Polished Inner Surface, every drop of water passing through the pot filler is natural, no harmful materials added..
  • Equipped with IMLEZON Aerator provides a steady pressure and straight consistent 3.5 GPM water flow.
  • 100% factory water pressure test and leak tightness test..
  • dual swing joints allows the pot filler to easily fold away when not in use..
  • 1/2-Inch - 14 NPT standard inlet female thread for wall mounted. It is recommended to use water tape..
Check Stock

Scubapro MK19 EVO/D420 Dive Regulator System

  • The MK19 EVO first stage with air balanced diaphragm is paired with the next-generation D420 balanced second stage for natural breathing and diving comfort in all dive scenarios..
  • Air-balanced Progressive Flow Control Valve delivers abundant airflow with an natural smoothness comparable to breathing above water..
  • Inner winglets within the D420's case direct airflow towards the exhaust valve dramatically improving exhalation effort, while a diaphragm lower in the casing takes advantage of the pressure gradient in the upright position for easier breathing..
  • The Dive/Pre-Dive System adjusts the direction of the airflow right out of the valve by adjusting the thumb tab switch on top of the casing..
  • Ideal for waters containing lots of suspended particles or silt, the compact MK19 EVO first stage's air-balanced diaphragm delivers effortless airflow unaffected by depth, tank pressure, or breathing rate..
Check Stock

WOWOW Pot Filler Faucet Matte Black Commercial Wall Mount Faucet Brass Pot Filler Black Folding Faucet Stretchable Double Joint Swing Arm Pot Filler Copper Rotatable Wall Faucet

  • ... from sink to stove. It can retract when not in use, save your kitchen space.
  • Matte Black Faucet Pot Filler: Low-key in a pure black finish, resists corrosion and not easy to oxidize, for creating a modern kitchen decorating style. Drip-free aerator provides a steady water pressure, no-splash and water saving.
  • Wall Mount Pot Filler: US standard size brass threads 1/2'' NPS to 1/2'' NPT, single hole wall mount installation，with a installation flange for stability . NOTICE: Only fit for cold water.
  • Warranty & Customer Service: 5-year warranty and timely customer support are offered. It is covered by 90-day limited return. Please contact us through your order, we will try our best to assist you.
Check Stock

CWM Stainless Steel Pot Filler Faucet Commercial Wall Mount Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles

  • Heavy Duty Stainless Steel Pot Filler : Constructed by 1.5mm thick SUS 304 stainless steel tubes.
  • Equipped with solid brass ceramic cartridge.
  • Great Water Flow: Max 5.5GPM, Equipped with Swiss Neoperl Aerator provides a steady pressure and straight consistent water flow..
  • Practical Design: There are two valves for double flow control, Double jointed spout water extends up to 21" and retracts when not in use..
  • Hygienic: Pure Stainless Steel construction with Polished Inner Surface, every drop of water passing through the pot filler is natural, without lead or other harmful materials added..
  • Assemble Dimension 1/2-Inch - 14 NPT inlet Single hole Stainless Steel Wall Mount Pot Filler Faucet.
Check Stock

OEMTOOLS 24441 Manual ATF Refill System, 8 Adapter Transmission Fluid Pump, Manual Fluid Transfer Pump Automotive, ATF Pump w/Shut-Off Valve

  • MANUAL TRANSMISSION FILL PUMP: The manual transmission fluid transfer pump allows the operator to fill or top off transmissions with up to 3 liters (3.1 quarts) of fluid between refills.
  • Multiple adapters to fit all of your transmission’s needs.
  • PRESSURIZED FILLER SYSTEM: Pressurized operation frees users from continual pumping.
  • Transmission flushing system works at a maximum pressure of 20 PSI.
  • The gauge registers a maximum pressure of 30 PSI.
  • Release excess pressure with the release valve.
  • FITS MANY VEHICLES: This transmission fluid pump automotive tool includes adapters for use with many Ford, BMW, Honda, Nissan, VW, Porsche, Mini Cooper, Audi, and Mercedes-Benz transmissions.
  • Included adapters cover the most common transmission systems.
  • CONVENIENT FEATURES: ATF transmission fluid filler comes with a belt attachment for storing each ATF flush adapter on the oil dispenser tank.
  • Transmission fluid flush kit hose features a swivel connector and a fluid dispensing shut-off valve.
  • MULTI-PURPOSE TRANSMISSION FILL KIT: This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
  • Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
Check Stock

Locking Pre-vent Cap for Auxilary and Transfer tanks

  • THIS ITEM HAS BEEN REPLACeD BY THE NEW AND IMPROVED FSS 754.
  • The Flow Security Systems PRE-VENT Fuel Cap represents the latest in fuel cap technoloy. The FSS 750 pre-vent cap is designed to permit the controlled release of fuel tank pressure from volatile fuels. When removing the cap to refuel a 1/2 turn of the cap releases the fuel tank pressure before the caps sealing gasket is released from the filler neck. This feature dramatically reduces the possibility of fuel expulsion from the filler neck when the cap is removed. The FSS 750 pre-vent security cap is for use on diesel, transfer and auxilary tanks. Allows pumping of fuel at 15 gpm without removal of cap. The FSS 750 pre-vent security cap helps to maintain fuel quality by reducing condensation and evaporation loss..
  • Patented Spinsecure design prevents unauthorized access to fuel, Suitable for use on all tranfer tanks.
  • For use on all 2” female threaded tanks, Tubular lock and key with over 50,000 combinations.
  • Can be keyed alike for multiple use convenience, Has weather proof self-closing latch covering the face of the lock.
Check Stock

MSTJRY Pot Filler Faucet Wall Mount Commercial Kitchen Faucets Stainless Steel Stretchable Double Joint Swing Arm Single Hole Two Handle Kitchen Sink Faucet

  • Polished Inner Surface to Insure the Most Hygienic Water Supply Faucet Available. Dual swing joints with approximately 21" extension..
  • Max 3.5 GPM@ 60 PSI water flow, Swiss Neoperl Aerator Provides Steady Pressure with Straight and Consistent Water Flow, that will quick fill up a pot..
  • 1/2-Inch - 14 NPT inlet Single hole stainless steel wall mount pot filler faucet, install it with heavy duty plumbing tape to avoid leaking..
  • dual swing joints allows the pot filler to easily fold away when not in use. The pot filler often installs the height upon your pots about 2 -3inches..
  • 360 degree rotation. You only need to stretch and rotate the joints when you use several pots placed in different directions ..
Check Stock

Aquafaucet Pot Filler Faucet Brushed Nickel Wall Mount with Double Joint Swing Arm Folding Articulating 2 Handle Solid Brass Kitchen Faucets for Kitchen Restaurant

  • Pot filler faucet with brushed nickel surface which is resist scratches and corrosion, not easy to oxidize. Equipped with delicate aerator provides a steady pressure and straight consistent water flow,quiet and no-splash, and more importantly, water-saving..
  • This wall-mounted kitchen faucet is equipped with Dual joints with 360 degree rotation, which with effortless flow control or spout with easy one-handed operation, making it more convenient for your daily life.Please turn off both switches when not in use..
  • The wall mount kitchen faucet double joint design with the swing arm and 2 handles, single hole, and it can retract when not using, make efficient cooking, let kitchen more clean and sanitary, save more space, modern design can match decoration easily..
  • Pot filler kitchen faucet high Quality Brass Material,brass body construction ensuring quality and longevity.Brushed nickel finish provides a lightly brushed warm grey metallic look.The pot filler faucet is only for cold water use.
  • Pot fillers wall mount with NPT 1/2" or 1/2" NPSM connecting thread,designed to easily install with standard U.S.,dual Handles pot filler with Two ceramic valves provide smooth turning action and prevent dripping.All parts you need is together in one box.
Check Stock