ReviewsBall Bushing

uxcell LM16UU Round Flange Linear Ball Bearings, 16mm Bore Dia, 28mm OD, 37mm Length(Pack of 2)

  • Model: LM16UU (Nominal Shaft Diamter (dr): 16mm, Outer Diameter (D): 28mm, Total Length (L): 37mm).
  • Round Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

Freedom OffRoad Front Upper Control Arms for 2-4” Lift 2004-2020 F150

  • 【Fitment】Fit for 2011-2019 Silverado 2500HD 3500HD 2WD/4WD（only for 8-lug）.
  • 2011-2019 Sierra 2500HD 3500HD 2WD/4WD （only for 8-lug）..
  • 【Notice】Please tighten the zerk at any direction after refilling grease.DO NOT use excessive force to prevent copper zerk broken. And new ball....
  • 【Improvement】PU bushing enhances driving performance.
  • CNC Machined provides bolder and safer pipe diameter.....
  • 【Safety Guarantee】TIG welding supply better stable and reinforced structure than MIG welding..
  • 【Quality Assurance】12-month warranty of ball joint and 1-year warranty of control arms with sufficient after-sales service. We offer “ 30-DAY....
Check Stock

Youxmoto Ball Joint Press Kit & U Joint Removal Tool Kit with 4x4 Adapters for Most 2WD and 4WD Cars and Light Trucks 10PCs

  • Must have for ball joint service: Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press-fit parts....
  • We're different: Made from heavy-duty forged steel technology, through the Charpy impact test, Unlike the ball joint dismantling tools made of 45#....
  • Compatible with a wide range of vehicles: Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup....
  • Package includes: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x....
  • Worry-free shopping experience: If you have any questions, please do not hesitate to contact us. Every product enjoys a 24-hour response, a 30-day....
Check Stock

MSD 8366 Pro-Billet EFI Distributor

  • Drop-in billet replacement for GM distributors with the small cap and external coil.
  • Factory style ignition module accepts factory wiring.
  • CNC machined billet aluminum housing and billet aluminum base.
  • Magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range.
  • Oversized steel shaft is QPQ coated and guided by a sealed ball bearing and an extra long sintered bushing.
Check Stock

Pair Set 2 Front Lower Rearward Control Arm Bushings For Chevy GMC Pontiac

  • This front lower driver side control arm comes pre-assembled with bushing and ball joint for easy installation. Necessary parts are pre-greased. Ball....
  • OE / Interchange: RK621129, CK621129, K621129, MS50163, TXMS50163, CMS50163, 15782683, 25878029, 15782683, 25878029.
  • ISO / IATF 16949 Certified, engineered for superior durability to meet OEM specifications. Stamped from high quality steel and coated with an....
  • Replacement for 2005-2007 2008 2009 Chevrolet Equinox 2006-2009 Pontiac Torrent 2002 2003 2004 2005 2006 2007 Saturn Vue 2.2L 2.4L 3.0L 3.4L 3.5L.
  • Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is....
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

uxcell LMK6UU Extra Long Square Flange Linear Ball Bearings, 6mm Bore Dia, 12mm OD, 35mm Length(Pack of 2)

  • Model: LMK6UU (Nominal Shaft Diamter (dr): 6mm, Outer Diameter (D): 12mm, Total Length (L): 35mm).
  • Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

MSD 8560 Pro-Billet Marine Distributor

  • Designed for use in marine applications with Chevy V8 automotive engines.
  • CNC machined billet aluminum housing and billet aluminum base with two flame arrestor holes with brass screens.
  • Easy-to-adjust mechanical advance with supplied springs and stop bushings.
  • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range.
  • Polished steel shaft is QPQ coated and guided by a sealed ball bearing and extra long sintered bushing.
Check Stock

Ruimou 12Pcs LM8UU Solid Polymer Bearing 8MM Linear Bearings（8X16X25MM） for Mendel 3D Printer Replace Parts

  • Model: LMK8UU (Nominal Shaft Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm).
  • Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

Ball Bearing, Linear Ball Bearing 10pcs LM8UU 8mm Linear Motion Ball Bearing Bushing for 8mm Rod 3D Printer CNC Parts

  • Model: LMK10UU (Nominal Shaft Diamter (dr): 10mm, Outer Diameter (D): 19mm, Total Length (L): 55mm).
  • Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock