Big Foot Tools LA-BHMHH Hand Held Bolt Hole Marker
- Bolt locator, HD bolt locator, ledger bolt locator, plate bolt locator bolt hole marker .
- Five different marks: 1/2" , 5/8", 3/4", 1", and 1 1/4".
- Ball bearing lock keeps the indicator in place.
ReviewsBall Head Bolt
SEDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch
- Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
- Product material: made of Chrome Vanadium Steel, hardness: 54~58HRC. Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
- 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1/4" x 6-3/4".
- 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4".
- 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
Peck Slither and Slide
- Compatible with deck heights of 53 to 60 inches.
- Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
- Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
- One-piece construction for easy assembly.
- Shipping dimensions -118” x 17” x 26”.
- Limited Lifetime against cracking and fading.
- Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..
HORUSDY 28-Piece Heavy Duty Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch
- Available in 28 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
- Product material: made of chrome vanadium steel, hardness: 54~58HRC, Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
- 16PC Chromium Vanadium Steel：punch and chisel set comes with 16-pc. chrome vanadium punch and chisel set, 5-pc. pin punches, 5-pc. taper punch, 3-pc. cold chisel, 2-pc. center punch and chisel punch gauge..
- 12PC High Carbon Steel：6PC cold chisel set, 4PC pin punch set and 2PC center punch..
- It is equipped with a special storage bag for easy carrying..
3941156 Overflow Valve for 1998-2002 Dodge Ram 2500 3500 Diesel 5.9L with Bosch P7100 Injection Pump OE# 1467445003 1417413047 4089577
- FITMENT: Dodge Ram 2500/3500 5.9L 1998-2002..
- APPLICATION: For the Bosch P7100 injection pump..
- INTERCHANGE PART NUMBER: 3941156, 1467445003, 1417413047, 4089577..
- FUNCTION: Adjust your fuel pressure without stretching spring..
- NEW STYLE: This overflow valve is the new style with the ball type spring retainer, not the old double bolt head type..
Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Yellow
- 10' (118" actual length) Wave slide is compatible with deck heights of 53 to 60 inches high.
- Age Range: 3 to 10 - Supports up to 250lbs.
- Super deep wave slide (actual depth is 10") ensures children remain safe while sliding.
- Mounting lumber not included - Recommended 5/8 x 1 3/8 x 20 3/8 inches.
- Mounting hardware not included - Recommended rounded head 5/16” bolt with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work.).
- Strong one piece construction with 3 bolt installation.
- Limited Lifetime Warranty against cracking and fading.
- Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. Warranty is applicable for intended use only..
- Assembled dimensions-118" x 23.5" x 18" - Shipping dimensions -118” x 17” x 26”.
YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup
- ...n, with high-strength and deformation resistance features, can stand high intensity extrusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using for better preservation..
- This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers..
- According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts..
VANGUARD Alta Pro 2V 263Ct Carbon Fiber Video Tripod
- Built-in 75mm leveling ½ ball complete with locking set screws and 3/8”-16 top Mount thread head mount bolt.
- 2 legs equipped with rubberized leg grips and anti-slip rubber feet. ¼ turn lock/unlock twist leg locks and top section lock/unlock leg markings.
- 3 Section carbon fiber tripod legs and 4 labeled multi leg angle selections (20°, 40°, 60°, 80°) and 2 Spirit bubble levels for easy leveling.
- Maximum load capacity of up to 13.2 pounds.
- Tripod specifications: 26mm, 3 section carbon fiber legs, folded height: 23.875", extended height: 51.125", macro height: 6.125", weight: 3.53 pounds.
Drill, Press - Antique Blacksmith Shop: Drill Press: Start, Drill Normal, Stop, Drills - Electric, Sfx
- GREATER PRECISION: Enclosed spindle assembly is supported by four permanently-lubricated ball bearings..
- INCREASED SAFETY: Extend the telescoping spindle guard as much as needed..
- ACCURATE OPERATIONS: Large 1-7/8" diameter quill travels 3-1/8"..
- JUST THE RIGHT SPEED: 16-speed motor turns quill 200 to 3,630 RPM..
- CONSISTENT REPEATS: Accurate depth stop displays inch/mm and has quick-set bolt for fast, accurate adjustments..
- SOLID SUPPORT: Large ground steel column and cast iron head..
Amerbm Heavy Duty Pitman Arm Puller Adjustable Jaws Bearing Puller Pull & Repair Pitman Arms, Bearings, Collars, Gears, More Light Truck & Car Repair Tool
- Application: Amerbm heavy duty pitman arm puller is designed to remove the pitman arm shaft in cars and light trucks 3/4 ton. It can also be used for bearing, collar and gear removal..
- Design: Features forged adjustable jaws and two clamp bolts that lock jaws together. Two clamp bolts lock the jaws on the pitman arm ensuring a solid grip..
- Material: Made of #45 carbon steel, black oxide finish resists corrosion and rust. Adjustable and have rugged forged jaws shaped to fit the job..
- Function: Pressure screw has ball head designed for striking. This tool includes an adapter for added versatility and both pullers cover a variety of pulling jobs. Similar to OEM 27170..
- Package: Pressure Screw, H-Frame, Jaw Bolt, Jaw, Clamp Bolt and Wing Nut, Pressure Screw Adapter..
iFJF 1R-0750 Fuel Filter and Refit Head and 12642623 Fuel Filter Head with Pump Replacement for GM Duramax V8 6.6L 2005-2016 Chevy Silverado/GMC Sierra 2500HD 3500HD Replaces TP3018
- Fits model:2005-2016 GM Duramax Chevy Silverado/GMC Sierra 2500HD 3500HD V8 6.6L Diesel Engine LLY/LBZ/LMM/LML..
- Fuel filter cross reference:TP3018,TP3012,19305685,12664429,12633243,33960XE,LFF6012,1R-0750,BF7633,P551313,P551740,FF5320,MK13104,P8334,33528,CB01405912,LFF3347,3528..
- 12642623 filter head:Made of billet aluminum,we used the electrophoresis process to treat the surface of the base,protect it from rust and dust.Also includes a heater plug.The aluminum air bleeder screw which replaced plastic OEM screw was more durable.The hand fuel pump and two tubes were made of iron..
- 1R-0750 Refit Head:High-Flow,Increased Filtration and Lower Cost Filter Replacements,Billet Aluminum, Black Anodized CNC machined refit head designed to allow you to replace the poor-quality OEM filter with a superior quality spin-on filter element..
- Upgrade:We improved the process of the refit head's bolt,you don't need to remove the check ball and spring in the 12642623 fuel filter head anymore before combine the head and filter..