ReviewsBall Joint Puller Tool

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

Strong Ball Joint,U-Joints and Brake Anchor Pins Press and Removal Tools丨Universal Installation Kit for Pre-pressed Upper or Lower Control Arms

  • This Dynofit U joint and brake anchor pins for Most 2WD and 4WD Cars and Light Trucks, Heat Treated C Clamp Puller is made of high quality material which can excellent press rusted parts effortlessly and it’s not easy to bent..
  • This Ball Joint Press Kits has a wide range of applications, it can not only be used to remove ball joints, but also U-joints and brake anchor pins, the operation is easy which won’t take a long time..
  • Package:10pcs as pic shown in box, 7/8" (22mm)socket recommended, and the exquisite plastic is through heat treated which make the surface more beautiful, you are not only got a set of tool, you also got a nice gift..
  • Well Made: better finish, more smooth screw, flat machined to keep sitting flush against the ball or u-joint, air damping new design thread for little accurate adjustment!.
  • Brand Promise: 1 year warranty, free return replacement or refund if missing parts, thread problems or anything else.
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ...emove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use lubricating flui....
Check Stock

6575 Hub Grappler Kit Universal for Vehicle Wheel Hub and Bearing Removal & Installation

  • 【SPECIFICALLY DESIGN】-- ①3/4'' custom drive screw, 5-10 times longer than similar designs, which with special equalizer washer provide smooth operation. ②Jaws designed and sized to property fit hub applications and is quickly located on the puller bar without the use of fasteners. ③ The puller is specifically designed to apply maximum force with minimal effort from an impact gun..
  • 【SUPERIOR MATERIAL】-- All parts made of solid carbon steel, proprietary heat treating extends its life while anti-rust finish resisting impact, corrosion and deformation. Mold-blown plastic case is convenience to carry and storage. keeps all tool great and organized..
  • 【SATISFACTION GUARANTEE】-- Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with This 6575 Hub Grappler Kit, simply return it for a full refund in 30 days, guarantee with 1 year’s warranty..
Check Stock

E-cowlboy Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit,63mm 48mm CV Joint Fork Adapter,Heavy Duty 10 Pounds Slide Hammer

  • 【Slide Hammer Puller Set with Plastic Suitcase】: This kit include: 1 heavy duty slide hammer.
  • 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry..
  • 【 Perfect Joint Fork】 : This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • 【Slide Hammer Made of Heavy Steel】The slide hammer and the CV joint fork is made of heavy-duty steel, which can withstand huge pressure without deformation, is not easy to break, and is more durable. The sliding distance is 19.5 inches, and the weight is 10 pounds .The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
  • 【Quick to Remove CV Axle 】:With thi....
Check Stock

6575 Hub Grappler Kit Used on Vehicle Wheel Hub and Bearing Removal & Installation

  • 「FUNCTION」This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 「A MUST HAVE」The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time.
  • 「EASY TO USE」 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation..
  • 「NICE DESIGN」 Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners..
  • 「UNIVERSAL FITS」 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
Check Stock

VCT 23" Long 5lb Slide Hammer Inner CV Joint Puller

  • The set includes a 23-inch T-style slide hammers bar, a 5 lb hammer weight, a nut, and a 2-inch opening 2.5-inch depth slide hammer CV axle adapter. They will remove the axle assembly without damage on 1986 to current Taurus and Sable..
  • The slide hammer and puller design provide a straight and even pull to protect joint off damage. The round bead on the puller will stop the hammer so it can never hurt the hand pulling on T-shaped handle..
  • Our CV joint puller adapter and large slide hammer bearing puller will create added torque to impose a large pressure on CV axle. This tool set could easily loosen and remove stubborn CV axles in minutes..
  • The product is made of premium steel, all the parts have hardened and finished with high-temperature oxide to ensure superior durability and rust and corrosion resistance..
Check Stock

Powerbuilt Front End Vehicle Service Kit Tie Rod End Puller Car and Truck Ball Joint Remover Pitman Arm puller 6 Piece 648626

  • Removes tie rods, ball joints and Pitman arms without damaging parts.
  • Durable storage case with step-by-step instructions.
  • Precision-built to meet or exceed ANSI standards.
  • Kit Services: most cars and light trucks.
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

DASBET 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer

  • Function: The ball joint press removal tool with four wheel drive adapter allows easy removal of crimped parts including ball joints, universal joints, brake fixing pins, etc. You don't need to remove the control arm from the vehicle at all during operation, improving work efficiency..
  • Durable Structure: The ball point press kit is made of heavy forged steel with black oxide finish adapters.The ball joint service auto tool kit has great strength and service life, while rust and corrosion resistant.And the ball joint separator tool can withstand long-term and massive use..
  • Easy to Operate: The ball joint service auto tool kit is ideal for removing/installing vehicle parts. You can remove all lock ring retainers from the brake anchor pins, then place the C-frame press on the brake spider, and tighten the forcing screws until the mounting pins are removed. .
  • Wide Compatibility: The ball joint press & U joint removal tool kit is suitable for most two wheel drive (2WD) and four whee....
Check Stock

Sunluway 6575 Hub Grappler Kit for on Vehicle Wheel Hub and Bearing Removal & Installation

  • 【UNIVERSAL FITS】 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
  • 【FUNCTION】This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 【PERFORMANCE】Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners.
  • 【EASY TO USE】 With 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation. Easy to remove and install the front hub and bearing .Comes with Operation Manual..
  • 【A MUST HAVE】The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time..
Check Stock