ReviewsBall Joint Tv Mount

FITUEYES Floor TV Stand with Wood Base for 32-65 inch TVs, Modern Corner TV Stands for Bedroom, Height Adjustable Universal Swivel TV Mountoom

...nch TV, you will get higher & bigger vision while playing video game! Seeking for a modern, cool, space-saving mounting solution? It fits perfectly!.
【±30° Swivel Bracket】Screw in safety lock, securing TVs on swivel mount firmly. Iron bracket could swivel by 60 degrees, 30°for left and 30°for right. Flexible joint allow you to operate the 65 inch tv stand with ease. Whether you are lying down, seated, or standing. stand, it help you avoid watching TV in awkward angle..
【Tall TV Stand with Height Adjustment】This floor tv stand can be adjusted from 47.8”- 55.7”. Both of support pole and hooks are height adjustable. Sit or stand up, whatever you prefer while playing game, you can adjust tv position to get right viewing position..
【Wood Base & Floating Shelf】 With sturdy metal frame, 20mm thick wood base, tv stand for bedroom is stable enough to protect tv from your kids/pets. Shelf can be positioned at any height of pole and hold up to 22lbs, easily store STB, soundbar, Play Station, Xbox, switch, etc..
【BUYER READING】An universal TV stand fit for 32 -65 inch TVs and hold up to 88lbs. VESA of this TV stand with mount covers a wide range -- 200(w)x200(h) to 600(w)x400(h)mm, fits Samsung/Sony/LG TVs, etc. Perfect for corner, bedroom, l....

Check Stock

FITUEYES DESIGN Corner Floor TV Stand for 55 65 75 80 inch Large TV, Mid Century Modern TV Stand Swivel TV Mount & Black Heavy Duty Metal Base Holds 110lbs, Wood TV Floor Stand for Living Room Bedroom

...ight clearance: 2” ). ±30° swivel mount is wide enough to hold 80 inch TV..
➍【Open Shelf】Capacity- 10KG/22lbs for 15.7”x11.5” shelf, wide enough to put ps4/ps5, speakers, STB, laptop, etc. Media shelf is detachable & height adjustable. Shelf connector go through the inter-space of wood decor, no excess joint to television stand..
➎【Ample Space to Hide Cords】 Detachable back panel with built-in storage space can hide messy cords perfectly. No need to afraid that the plug being too big to go through pre-drilled hole. Just attach cords to the backside of stand, then conceal back panel to cover cords！Just two step！ And rotating clips allows you detach back panel any time for adjusting..

Check Stock

Kleine Wolke Angled Shower Rod Mount for Sloped Walls - Low Cost Solution

Low Cost Solution for Installing Shower Rod on Sloped Wall.
Non Corrosive Mount Can Be Used With Any 25cm Diameter Tension Rod.
You also can buy matching Spring Rod - .98in / 25mm Diameter from the same seller if you want to have a matching rod for sure..
All Mounting Hardware Provided. Only one mount in the package.
Easy Installation - Screw Wall Mount into Wall.

Check Stock

Vantrue N2 Pro N2 T2 R3 X3 Dash Cam Mini USB Port Car Windshield Suction Cup Mount

Upgrade mini usb port suction cup mount for Vantrue N2 Pro dash cam, Vantrue N2 dash cam, Vantrue X3 dash cam, Vantrue T2 dash cam, Vantrue R3 dash....
Equipped with the upgrade ball joint, you can easily tighten the mount without a hassle of mount falling off..

Check Stock

OEMTOOLS 25105 Extra Large Ball Joint Press, Heavy Duty Ball Joint Removal Tool, Extended C Frame For Use With Toyota, Chevrolet, Dodge, Ford

Extra Large C Frame Press: Essential ball joint tool kit staple for removing press fit parts from pick up trucks.
Specialized C clamp makes truck ball joint removal simple.
Truck Ball Joint Separator: Ball joint puller tool made for pick up trucks.
For use with Toyota Tacoma and Tundra, Chevrolet 2500-3500 and Tahoe, Dodge Ram 2500-3500, and Ford F350-F550.
Rugged Frame Strength: Build a stronger master ball joint service kit with this heavy duty forged steel C frame.
This extra large ball joint press even removes seized joints.
Extended Applications: This heavy duty ball and U joint removal tool features an extended C frame.
Compatible with larger ball joint adapters that standard C frame presses won’t fit.
Use with Compatible Adaptors: Universal ball joint press does not include ball joint adaptors.
Use with OEMTOOLS 37310, 25104, 27023, or 27089 adapters.

Check Stock

Car Headrest Mount, Angle Adjustable Headrest Tablet Mount, Universal Tablet Holder for Car Backseat, for 5\ to 12.9\ iPad/Tablet/Smartphone/Nintendo Switch

...le devices sold in the market today. With the spring loaded method, the holder will grip the device tightly, doesn't budge easily. Intentional holes allow the device could still be charged while being clipped on the car headrest mount..
★【360-Degree Rotation, High Maneuverability】: With a fully customized ball joint and arms that provide 360-degree rotation. You can use your tablet in either portrait or landscape modes. And you can also choose the distance and viewing angle that is most comfortable for everyone..
★【Secure & Stable】: The tablet mount for car has a stabilizing arm to effectively support larger screen devices like the iPad, making it a convenient way to hold most 14in tablets. The speed bumps won’t affect the screen..
★【Rubber Protection】: The tablet headrest mount comes with soft padding to protect your device and car headrest. The post should be 5.11in to 6.88in apart measured from the inside of each post. This iPad holder for car will suit the headrest pole between 0.39 to 0.63in (1 to 1.6cm) in width..
★【Easy Installation, No Tools Needed】: This tablet holder for car is easy to install. There are two screws and one ball joint on the iPad holder for car. The ergonomic design allows you install and adjust it with....

Check Stock

iBOLT AMPS Adapter Plate

17 mm ball joint - fits all iBOLT car-docks.
32x38 mm industry standard hole pattern (=AMPS).
Perfect for KUDA, Arkon, Garmin or any Pedestal type Mount.

Check Stock

Realtree Outfitters Mount, 34', Charcoal

Realtree EZ Mount gives you versatility for "over the shoulder" filming..
EZMount can also be used for Trail Cameras and gives you a choice of any tree at any angle..
Ball-joint mount and folding body gives maximum range of motion..
Frees your hands for calling and shooting..

Check Stock

ChargerCity Car Boat Dash Articulate Suction Cup Mount for Garmin Nuvi 55 55LMT 56 56LMT 57 57LMT 58 58LMT 66 67 67LMT 68 68LMT 2597 2598 Drivesmart Drive 50 51 60 61 LM LMT GPS

Brand New in ChargerCity NO FUZZ NO MESS Packaging.
Ball Joint and Socket Design compatible with all Garmin Nuvi Cradle Brackets and allow the best Viewing Experience (Compatible with both horizontal and vertical vent).
Included Brackets Cradle is compatible with Garmin Nuvi 2457 2497 2539 2557 2558 2559 2577 2589 2597 2598 2599 2639 2689 2699 42 44 52 54 55 56 57 58 67 68 LT LM LMT LMTHD GPS.
Powerful suction base Mount provides a maximum surface bond on smooth surfaces (Ball head mount is Fits Garmin Dash Cam & Nuvi GPS devices with 17mm swivel ball mounting pattern).
Suction mount arm adjusts vertically and provides 360-degree rotation.

Check Stock

Barkan TV Wall Mount, 29 - 65 inch Full Motion Articulating - 3 Movement Flat / Curved Screen Bracket, Holds up to 88 lbs, Patented, Fits LED OLED LCD

► BEST SELLER - This 3 movement TV mount is one of our all-time best-sellers! It fits the most popular TV sizes for living rooms, has great functunality and is very safe and sturdy..
► SELF, EASY AND FAST ASSEMBLY - 1. Attach the adapters to the rear side of the TV 2. Install the bracket on the wall 3. Snap the TV onto the bracket..
► PATENTED, FITS VARIOUS SCREEN TYPES - this mount fits both flat and curved TVs, as well as TVs that have special structures on their backs. Some of the TVs have unique structures on their backs such as bumps, indentions, or nonstandard connection-hole patterns. Those special structures make it impossible to use normal TV mounts. To solve this problem without customers making unnecessary purchases, we developed a line of products based on a ball and socket mechanism, just like in a human shoulder. The four adapters can move in 2 dimensions which allows the mount to hug the screen firmly without any use of spacers or other improvised solutions..
► FEATURES - The TV mount fits most 29-65" TVs up to 88 lbs. Fits TVs with VESA (Bracket Mounting Holes Patterns) 200x100, 200x200, 300x300, 300x400, 400x200, 400x300, 400x400 mm and non VESA up to 400x400 mm..

Check Stock

Barkan TV Wall Mount, 13 - 43 inch Full Motion Articulating - 4 Movement Flat / Curved Screen Bracket, Holds up to 55 lbs, Patented, UL Listed, Fits LED OLED LCD, black (2400.B)

LIFETIME LIMITED WARRANTY - This mount was tested with 4 times its declared weight. 100% of Barkan products pass strict quality tests..
BEST SELLER - This 4 movement TV mount is one of our all-time best-sellers! It fits the most popular medium-sized TVs, has great functunality and is very safe and sturdy..
SELF, EASY AND FAST ASSEMBLY - 1. Attach the adapters to the rear side of the TV 2. Install the bracket on the wall 3. Snap the TV onto the bracket..
PATENTED, FITS VARIOUS SCREEN TYPES - this mount fits both flat and curved TVs, as well as TVs that have special structures on their backs. Some of the TVs have unique structures on their backs such as bumps, indentions, or nonstandard connection-hole patterns. Those special structures make it impossible to use normal TV mounts. To solve this problem without customers making unnecessary purchases, we developed a line of products based on a ball and socket mechanism, just like in a human shoulder. The four adapters can move in 2 dimensions which allows the mount to hug the screen firmly without any use of spacers or other improvised solutions..
FEATURES - The TV mount fits most 13-43" TVs up to 55 lbs. Fits TVs with VESA (Bracket Mounting Holes Patterns) 75x75, 100x100, 100x200, 200x100, 200....

Check Stock