ReviewsBall socket Cover

ARES 70345-3-Piece 1/2-Inch Drive Aluminum Socket Organizer Set - Store up to 10 Sockets on Each Rail and Keep Your Tool Box Organized

  • ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**.
  • VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered..
  • INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Socket Organizer, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be p....
Check Stock

ARES 70122-3/8-Inch Drive Blue 9.84-Inch Aluminum Socket Organizer - Store up to 10 Sockets and Keep Your Tool Box Organized - Sockets Will Not Fall Off this Rail

  • ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**.
  • VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered..
  • INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Socket Organizer, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be p....
Check Stock

2 Truck Upfitters 26.5" Gas Props for Snuglid SL & F2 Pickup Truck Shortbed Tonneau Covers (26.5" extended, 15.4" compressed, 80 lbs of pressure ea) MEASUREMENT REQUIRED! Incl 4 ball mounts and nuts!

  • ...F2 models) and Snuglid style Tonneau covers with 2 single lift assist arms. Fits other similar brand of fiberglass tonneau covers / truck lids, but measurement is required to ensure fit..
  • These do not fit all Snuglid fiberglass tonneau models (they do NOT fit ANY SL2 or RL models). Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. Also check for 80 pounds of pressure, or 355N – 356N Newtons of pressure.
  • Comes with four threaded 13mm ball mounts and nuts for alternate ‘other than tonneau cover’ applications. Equivalent to Stabilus 202677 or Snuglid # 713119. Prime! Free Shipping! In Stock!.
  • Fits many (but not all) Snuglid SL and F2 Shortbed and Extrashort bed (5.5-6.5′) Truck Tonneau Covers with single lift arms (see picture). Check your original struts for part numbers: Snugtop # 713119 or Stabilus # 202677..
Check Stock

Front Suspension Stabilizer Bar Link Pair For 2010-2014 Subaru Legacy KTR-101597

  • TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit.
  • TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
  • Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing.
  • INCLUDES: 2x Front Suspension Stabilizer Bar Link Kit (Both Side).
Check Stock

RAM Mounts Handlebar U-Bolt Base for Rails 0.5\ to 1.25\ in Diameter RAM-B-231ZU with B Size 1\ Ball

  • Zinc-coated metal U-bolt base with 1" rubber ball is designed to sit at right angles to mounting rail.
  • includes black cover caps for exposed ends of the U-bolt.
  • Compatible with any B size RAM Mounts component.
  • ball and socket technology allows for near-infinite adjustability.
  • Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments.
Check Stock

Clear Light Switch Guards, 9 - Pack | Toggle Style | Child Safety Cover | Light Switch Protection | Two Levels of Security | Home and Office

  • - PROOF SOCKET BOX: Preferred materials,, safe, durable and practical..
  • WALL SWITCH SOCKET COVER- PROOF SOCKET COVER: manufactured professional technology, durable and practical, and can be used for a long time..
  • CONJOINED SWITCH SOCKET CASE: It has a wide range of uses and can be well applied to bathrooms, toilets, kitchens, living rooms and other places..
  • HOME SOCKET COVER: The design structure is reasonable, and easy to disassemble and assemble, and you can easily apply it..
  • WATERPROOF SOCKET BOX: Simple and generous, it can your socket switch without affecting its appearance..
Check Stock

MOOG ES3545 Tie Rod End

  • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer....
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and....
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
Check Stock

MOOG ES3546 Tie Rod End

  • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer....
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and....
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
Check Stock

Drixet 3/8 & 1/2-Inch Drive Impact Universal Swivel Joint Set | 2Pc Cr-Mo Ball Type Flexible Wobble U-Joint Socket Adapters for Hard to Reach Nuts/Bolts

  • The Drixet Cr-Mo Impact Universal Flexible Joint Socket Holder Pack is designed with Pins to be used with impact wrenches transferring torque to allow sockets to be bent & access nuts/bolts in hard to reach tight areas with no trouble, while sustaining the greatest torques..
  • SPECS: Square Head Dr. Sizes Included: 3/8" 1/2" - Joint Adapter Working Angle: 30 Degree - Material: Chrome-Moly - Length: (3/8") 2" (1/2")-2.5" - Weight: 10 oz..
  • QUALITY: Heavy Duty Rust-Free Rotating Impact Swivels are Made in Taiwan From Drop Forged Heat-Treated Chrome Molybdenum Cr-Mo Steel ensuring a long lasting life without breaking or shattering - Meets and exceeds ANSI/ASME standards..
  • DESIGN: Innovative Ball Spring Design enables 360 Degree Rotation to reach into the hardest spots easily - Finished with Black Phosphate for Ultimate Durability - Spring Ball Bearings holds Sockets Securely on male end - Drive Hole on Female side Locks onto Drive Tang..
  • USES: Useful Wobble Socket Adapters for the Professional Mechanic Workshop, Handyman & Builder to use it with any Cordless/Electric Impact, Torque, & Ratcheting Wrench or Breaker Bar - Useful on Bikes, Automotive Engines, Spark Plugs, O2 Sensor Shields, Exhaust Manifolds, Ball Joints, Stubborn Tire Lug Nuts, Rusty Brake/Su....
Check Stock

MOOG ES3096L Tie Rod End

  • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer....
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and....
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock