ReviewsBand Clamp

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • ◇ CV Boot Clamp Pliers : Use with any banding up to 2/5-inch (10mm) in width.
  • Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the....
Check Stock

Adjustable Hose Clamps Band Clamp – 304 Stainless Steel Air Duct Clamp with 14 Fasteners, Large Worm Gear Hose Clamp for Automotive, Pipe, Plumbing, Tube and Fuel Line (34.5FT, 14PCS)

  • DIY HOSE CLAMP - There are different size tubes in your life, when you choose our Band Clamp set, you can easily trim the hose clamp strap in length you need, then insert the fastener to reach the desired size, no more waste of any materials.
  • MORE SIZE OPTIONS - 34.5 FT 304 stainless steel duct clamp strap with 14pcs fasteners, suitable to cut and get your long large pipe clamp in different sizes, such as 12 inches, 14 inches, 16 inches, 18 inches and so on.
  • EASY TO USE - The worm gear hose clamp adopts the open structure of the inner and outer ring, you just need to adjust the size with screwdriver to loosen or tighten, fix the band clamp on the joint to provide sealing performance. The large air hose clamp can be applied to big size mufflers, automobile exhaust pipe, cables, tubes and so on.
  • DURABLE MATERIAL - Hose clamp kit is made of 304 stainless steel, strong rust resistance, water resistance, corrosion resistance, oxidation resistance, durable, which can be applied indoor and outdoor, such as in kitchen, bathroom, garden, boat and so on.
  • 100% SATISFIED - If you have any questions or concerns with your product, just contact us and we will replace the product or refund your order. Our team is always at your service..
Check Stock

440Pcs 15 Sizes 6mm-20mm Spring Band Clamps for Water Pipe-Automotive Fuel Line-Silicone Vacuum Low Pressure Air Tube Clamp Fasteners Assortment Kit

  • 【15 Sizes】The spring band clamp have various sizes including 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 15 different sizes can meet your different needs..
  • 【High Quality】The spring band clamp is made of 65 Mn steel, strong and durable, corrosion-resistant for long time use..
  • 【Leak Proof】The fuel line hose clamp can ensure a reliable and leak-proof connection between the hose and the joint, and is very suitable for connecting the hose to the joint to prevent flow leakage..
  • 【Easy to Use】1. Prepare pliers and spring clips. 2. Press firmly on both ears to make the inner ring bigger. 3. Put the spring band clips on a suitable pipe. 4. Loosen the pilers, can be clamped..
  • 【Wide Application】The vacuum hose clamp is suitable for push mower, riding mower and snowmobiles, ideal for vacuum and low-pressure fuel lines etc..
Check Stock

Roadformer 3' Butt Joint Exhaust Band Clamp - Aluminized Steel for 3' OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 3" butt joint exhaust clamp is made in high quality standard. This band clamp is used for 3" OD exhaust ends connection.
  • REAL SEALING CAPABILITY – Roadformer 3" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

Banjo TC206 2\ T-Bolt Hose Clamp

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS Aluminum V-Band flanges are made of 6061 aluminum and utilize a NBR o-ring to create an air-tight seal for positive pressure applications. Ideal for intercooler piping systems as well as intake systems..
  • The HPS Aluminum V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your aluminum tubing to the flange and allow unrestricted air flow. REMARK: Do not use HPS Aluminum V-Band kits for exhaust applications..
Check Stock

TEHAUX 40 Pcs Adjustable Hose Clamp Water Oil Tube Hose Clamps for Flexible Hose Pipe

  • for industrial or home use, help to lessen pressure and protect the hose..
  • Made of iron, plated surface, improve the ability of corrosion resistance and anti resistance..
  • hose extrusion with the hose clamp. Iron wire band is more stronger for long time fastening use..
  • Wire hose clamp, easy to use, release or tighten the screw to adjust the band diameter range..
  • Release or tighten the screw to adjust the band diameter range..
Check Stock

OEMTOOLS 25198 Hose Clamp Pliers Set, 2-Piece

  • Includes Flat-Band Hose Clamp Pliers and Angled Hose Clamp Pliers.
  • Thick, Double-Dipped Handles for a Comfortable and Firm Grip.
  • Services Most Ring-Type or Flat-Band Hose Clamps.
  • Jaws Swivel to Access Hose Clamps in Any Position.
  • Clamps Are Held Open with a Ratchet Locking Mechanism.
Check Stock

OTC 4496 Stinger Hose Clamp Pliers Set - 6 Piece Plus Storage Case

  • OTC's Hose Clamp Pliers Set features five different styles of hose clamp pliers and a hose removal tool.
  • Included tools will service most flat-band and ring-style hose clamps.
  • Pliers included are: flat-type hose clamp pliers, offset hose clamp pliers, 45 degree hose clamp pliers, and a set of straight hose clamp pliers.
  • Rugged blow-molded plastic storage case keeps tools contained and organized so they are ready when you are.
Check Stock

Flexible Wire Long Reach Hose Clamp Clic R Type Swivel Jaw and Flat Band Pliers for Fuel Oil and Water Hose Work, Automotive Hose Repair Tools Kit with 9 pc Hose Clamp Pliers

  • All-in-one Tool Set, includes Hose Clamp Pliers, Flat Band Hose Clamp Pliers, Angled Flat Band Hose Clamp Pliers Hose Remover Pliers, Swivel Jaw Hose Clamp Pliers (+ Slot) & Swivel Jaw Hose, Clic-R Collar Pliers, Screwdriver and Hose Remover in a heavy-duty blow-mold case with handle and latches for secure storage, simple organization and easy transportation..
Check Stock

POWERTEC 71101 Deluxe Quick Release Strap Clamp | Woodworking Frame Clamping Strap Holder

  • INCLUDES: (1) Strap Clamp with Quick-Release Levers.
  • APPLICATIONS: This adjustable band clamp is perfect for square, round, rectangle and uniquely shaped work pieces.
  • VERSATILE: Provides tight, secure and adjustable clamping action for an assortment of irregularly shaped items and projects, including building picture frames, cabinets, chair frames, drawers, barrels, birdhouses, and so much more.
  • DESIGN: Constructed with a durable plastic frame with non-marring clamping jaws, and paired with high grade nylon webbing for the band.
  • SPECS: Band length is 1-inch wide by13-feet long, and the corner brackets are 1-1/4 inches.
Check Stock