ReviewsBanding Wrap

GSCIT Club Melamine Edge Banding, 3/4 inch x 25ft White Edge Banding with Hot Melt Adhesive Pre-glued Cabinet Edge Banding Flexible White Veneer Edging for Plywood Furniture Table

  • √【BRAND GUARANTEE】- GSCIT Club is a company specialized in Edge banding, which can GUARANTEE THE ORIGINAL QUALITY AND CUSTOMER SERVICE..
  • √【HIGH QUALITY】- The edge banding is made of high quality melamine material, which is durable and elastic, with a smooth surface and not easy to be dirty.When you repair Laminate and Cabinets, Melamine Edge banding will be your first choice..
  • √【UPGRADE DESIGN】- The size of Edge Banding is 3/4 inch x 25ft, and the thickness is 0.3mm, It's suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the excess sides with the Utility Knife, 0.3mm thickness can let you easy to do..
  • √【WIDELY USED】- Our design is high quality & fashionable, This Edge Banding were doing market research which is matching most customer favorites. Melamine Edge banding is a thin material used to seal the exposed sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it..
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • ◇ CV Boot Clamp Pliers : Use with any banding up to 2/5-inch (10mm) in width.
  • Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the....
Check Stock

Swpeet 10Pcs Ear Clamp Pliers with CV Boot Clamps Kit, Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars

  • ...s, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • ☛ 3, 【With Ear Clamp Pliers and CV Joint Boot Clamp Pliers 】 —– The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • ☛ 4, 【Easy To Use】 —– Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and use cutter pliers..
  • ☛ 5, 【What You Get 】—– In this kit, You will get 4Pcs Small CV Boot Clamps(Height: 7mm), 4 Pcs Large CV Boot Clamps(Height: 9mm), 1Pcs CV Joint Boot Clamp Pliers and 1Pcs Ear Clamps Pliers In total 10Pcs in a box, can meet all your ....
Check Stock

Edge Supply Professional Heavy Duty Edge Banding Trimmer – Edge Trimmer for Wood Veneer Edge Banding, PVC, Melamine, Plastic – Veneer Trimmer for Perfect Straight Finish – Woodworking Veneer Cutter

  • EDGE BANDING POFESSIONAL HEAVY DUTY TRIMMER – this expert designed edge banding trimmer easily cuts veneer edge banding with ease thanks to the ultra-sharp steel blade. Cut off any excess material and achieve a perfect, straight finish every time, without tearing the banding.
  • STRAIGHT FLUSH EDGES – our veneer cutter is easy to use and is suitable for use by both professionals and hobby woodworkers. A versatile veneer trimmer which cuts neatly straight lines resulting in a clean, flush finish.
  • SUITABLE FOR A VARIETY OF EDGE BANDING SIZES – this edge banding cutter has been designed to fit edging up to 1 mm thick and between 0.5 and 2 inches wide bandings.
  • PREMIUM QUALITY VENEER CUTTER – made from the highest quality carbon steel, this long-lasting veneer trimmer features a steel blade which supplies a clean cut. The blade can be sharpenned so there is no need to replace blades like traditional trimmers..
  • VERSATILE EDGE BANDING CUTTER – this veneer edge trimmer is ideal for a variety of woodworking projects including furniture, shelving and cabinetry and can be used on a wide range of materials including wood veneer, melamine, plastic, PVC and more.
Check Stock

Edge Banding Trimmer for All Directions, Edge Trimmer with Tungsten Carbide Blades (1-Pack)

  • Easy To Use - Works perfectly with no practice or experience, Pneumatic action allows the edge banding cutter to adjust to different thicknesses very easily. Makes edge banding a breeze, is very comfortable to use, will not cause palm fatigue..
  • Save Time - Using our edge banding tools can greatly reduce the time and effort to complete the work, no more utility knives or razor blades. This plywood edge trimmer tool makes it so easy!.
  • Sharp, Leave No Trace - The sharp tungsten carbide blades to make the trimmer cut smoothly and cleanly and leave a nice edge. Will not cause the problem of excessive cutting. Clean, tight incisions, no confusion or fuss..
  • Easy Conversion - Easy to disassemble and assemble! When you cannot slide the tool with the two jaws due to the special gap problem, you can take the veneer edge trimmer apart and use it on one edge at a time..
  • Cuts in Both Directions - The edge banding machine has four sharp cutting edges, which can trim forwards and backward. This is very suitable for trimming oak edge banding and is suitable for any project that involves installing ....
Check Stock

ATERET Band Strapping Kit - Steel Strapping 3/4 Width 0.023 Tensioner Crimper Banding Cart & 5,000 ct Open Seals

  • Steel Banding - Our 3/4" Width, 0.023" steel strapping is a strong and reliable strap that provides high shock resistance during delivery. Applications include securing packaged glass, wide loads, wood shipping containers, and securing irregular loads to pallets. Perfect choice for heavy duty loads that require high strength restrain.
  • Strapping Tensioner - Our tensioner is a manual tensioner that is easy to use, lightweight, and great for uneven surfaces. Most used for industrial strapping and household packaging. Applications include securing goods for transport, pallets, and warehouses loads..
  • Strapping Crimper: Our commercial grade hand crimping tool is easy to use, lightweight, and great for uneven surfaces. This hand sealer is ideal for crimping and sealing to create a solid banding connection. Most used for thick packaged materials, securing goods for transport, pallets, and warehouses loads.
  • Banding Cart - Our banding cart is portable and provides easy dispensing of steel strapping or banding..
  • Steel Strapping Kit: Steel Strapping, 3/4" Width, 0.023", Tensioner, Crimper, Banding Cart & 5,000 ct Open Seals. The kit also comes with a pair of safety glasses and safety gloves..
Check Stock

Edge Supply Maple Wood Veneer Sheet Flat Cut, 24\ x 96\

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” X 50' iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to w....
Check Stock

Mixed Variety Domestic Veneer Pack 5-6 sq ft/9 Sheets Or More

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to wood, plywood,....
Check Stock

Edge Supply Birch 3/4” X 250' Roll of Plywood Edge Banding – Pre-glued Real Wood Veneer Edging – Flexible Veneer Edging – Easy Application Iron-on Edge Banding for Furniture Restoration – Made in USA

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” x 250’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can....
Check Stock

ATERET Band Strapping Kit - Steel Strapping 3/4 Width 0.023 Tensioner Crimper Banding Cart & 5,000 ct Open Seals - w/ 2 Free Accessories

  • Steel Banding - Our 3/4" Width, 0.023" steel strapping is a strong and reliable strap that provides high shock resistance during delivery. Applications include securing packaged glass, wide loads, wood shipping containers, and securing irregular loads to pallets. Perfect choice for heavy duty loads that require high strength restrain.
  • Strapping Tensioner - Our tensioner is a manual tensioner that is easy to use, lightweight, and great for uneven surfaces. Most used for industrial strapping and household packaging. Applications include securing goods for transport, pallets, and warehouses loads..
  • Strapping Crimper: Our commercial grade hand crimping tool is easy to use, lightweight, and great for uneven surfaces. This hand sealer is ideal for crimping and sealing to create a solid banding connection. Most used for thick packaged materials, securing goods for transport, pallets, and warehouses loads.
  • Banding Cart - Our banding cart is portable and provides easy dispensing of steel strapping or banding..
  • Steel Strapping Kit: Steel Strapping, 3/4" Width, 0.023", Tensioner, Crimper, Banding Cart & 5,000 ct Open Seals. The kit also comes with a pair of safety glasses and safety gloves..
Check Stock

40-6\ x 12\ Labeled Wood Veneer Pieces (20 Square Feet) Exotic and Domestic Marquetry Arts Crafts Pack

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, red oak wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this red oak 2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging ....
Check Stock