ReviewsBar Hole Tool

Bonbo 5PCS Blacksmith Anvil Hardy Tool Set 1 Inch Hot Cut Tool, Creasing Stake Tool, Bottom Fuller, Turning Bending Scrolling Fork, Bending Forge Scrolling Welding Jig

  • Hot Cut Tool: Used in the anvil or clamped in a vise to cut hot metal. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick. Cut most of the way through, then break the piece off to prevent flying hot metal..
  • Creasing Tool Stake: Fits in a 1 inch Hardy hole in an anvil, or can be used in a Vice. Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
  • Bottom Fuller Tool: Used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with. Square shanks fit the square hole in the anvil and prevent rotation..
  • Turning Bending Scrolling Fork: Used to bend fork in an anvil or in a vice. Used to bend heated steel, quickly forming the curved shape you want. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

ENTAI Box Cutter, 4-Pack Retractable Utility Knife for Cardboard, Boxes and Cartons, Solid Aluminum Shell with Non-slip Rubbery Handle, with Extra 14pc SK5 Blades

  • 8-in-1 multi tool: Pry bar, nail puller, wire stripper, small flat head screwdriver, large flathead driver, bottle opener, standard utility blade, cord cut notch and lanyard hole.
  • Utility knife uses full sized replaceable utility blades with locking feature to protect when not in use.
  • Dual ended design with pry bar and pocket knife to cut through rope or twine.
  • Compact and slim multi tool fits great in a pocket or tool box. Makes a perfect companion for any work job site and for the around the house projects.
  • Overall length 4.25 inches, weight: 4.2 ounces.
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）.
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock

Gerber Gear 31-003741 Prybrid X, Pocket Knife with Utility Blade and Prybar, Urban Blue

  • The Prybrid X Multi-Tool with replaceable blade is a lightweight pocket tool that you can trust to help you everday and in a crisis.
  • The Prybrid X features an easy to use tool-less blade replacement system, and slide-lock design for the #11 retractable blades.
  • Tool included: Retractable Fine Edge #11 Blade, Wire Stripper, Small Flat Driver, Large Flat Driver, Nail Puller, Pry Bar, Bottle Opener, Lanyard Hole, and Paracord.
  • both looks great and could be removed to help in a pinch.
  • The Prybrid X uses a Standard #11 Blade (#11 blades can vary in size, Fiskars Standard #11 Blades are the suggested replacement)..
Check Stock

Gerber Gear 31-003739 Prybrid X, Pocket Knife with Utility Blade and Prybar, Green

  • The Prybrid X Multi-Tool with replaceable blade is a lightweight pocket tool that you can trust to help you everday and in a crisis.
  • The Prybrid X features an easy to use tool-less blade replacement system, and slide-lock design for the no.11 retractable blades.
  • Tool included: Retractable Fine Edge no.11 Blade, Wire Stripper, Small Flat Driver, Large Flat Driver, Nail Puller, Pry Bar, Bottle Opener, Lanyard Hole, and Paracord.
  • both looks great and could be removed to help in a pinch.
  • The Prybrid X uses a Standard no.11 Blade (no.11 blades can vary in size, Fiskars Standard no.11 Blades are the suggested replacement)..
Check Stock

OTC 6779 Injector Puller for 2005-2011 GM Duramax Engines

  • OTC Injector Puller for GM Duramax engines - similar to Kent Moore J-46594.
  • For use on 2005-2011 model year GM Duramax 6.6L engines.
  • Safely pulls the injectors from the cylinder heads without pulling the injector cups.
  • Simply insert the tool into the injector retainer bracket bolt hole, attach a socket and ratchet/breaker bar to one of the hex ends and start rocking back and forth - the injector will pop right out.
  • Durable steel construction means tool will withstand heavy shop use and continue to perform as designed.
Check Stock

OTC 6778 Injector Puller for 2001-2004 GM Duramax Engines

  • OTC Injector Puller for GM Duramax engines - similar to Kent Moore J-44639.
  • For use on 2001-2004 model year GM Duramax 6.6L engines.
  • Safely pulls the injectors from the cylinder heads without pulling the injector cups.
  • Simply insert the tool into the injector retainer bracket bolt hole, attach a socket and ratchet/breaker bar to one of the hex ends and start rocking back and forth - the injector will pop right out.
  • Durable steel construction means tool will withstand heavy shop use and continue to perform as designed.
Check Stock

Iceboxx Pry Bar – EDC 4 Inch Titanium Mini Pry Bar Tool – Multipurpose Tool for DIY Enthusiasts, Professional Use – Innovative Tile Tools with Pocket Clip, Bottle Opener, Lanyard Hole Every Day Carry

  • A Must In Your Tool Kit: Whether a professional handyman, DIY enthusiast or you simply like taking care of various housework projects on your own, the Iceboxx hand tools are definitely a must in your set!.
  • Premium Quality Titanium Material: These home improvement bar tools are made with superior quality, highly durable titanium metal with a stone washed finish, guaranteed to withstand the test of time without rusting!.
  • Multifunctional and Versatile: This scraper tool features an innovative design which includes pocket clip, bottle opener, a lanyard hole for easy and safe keeping, and a pry bar end, combining various useful functions into one essential tool.
  • Optimal Dimensions: With a sleek, ergonomic and compact design and reduced dimensions, this tile removal tool fits nicely into your pocket organizer, making sure you have instant and easy access whenever you need to!.
  • Wide Applications: This trim removal tool can be used for a wide variety of fields and activities, from removing caulk, adhesives, paint and residue from glass, metal, and hard surfaces. Ideal for carpentry, construction work, DIY home projects and much more!.
Check Stock