ReviewsBar Tables

Warmaxx Black Metal Furniture Table Legs 30 inch Height Wrought Iron Console Table Leg Industrial Sturdy Table Legs for Coffee Computer Dinning Table Modern Side Table Legs 2 Pcs with Screws

  • 【Packing included】: 2 pieces of 30 inch Height legs, enough screws. If you want to attach to thinner panel, it is suggested to buy some shorter screws..
  • 【No wobble】: 100% straight and stable. Very sturdy and thick metal..
  • 【Ultra-sturdy metal legs】: This table leg is real metal and can definitely handle a heavy duty load. They are made from sturdy wrought iron in a matte black finish,through careful sanding and painting. Very stable and sleek looking..
  • 【Super easy to install】: Easy to install, each of the product has mounting plate with pre-drilled holes..
  • 【Widely Used】:This metal furniture table legs are great ideal for live edge slab tables, bar table legs, coffee tables, side tables, DIY desks, end tables, computer tables, office tables, benches and any furnitures..
Check Stock

ERGOMASTER Counter Height Bar Stools Set of 4 Backless Fabric Barstools 24-Inch Modern Wood Saddle Bar Stools with Nailhead Trim for Kitchen Island Counter Tabel - Beige/Brown,4-Pack

  • ...ls legs that can protect the floor from being scratched..
  • 【Counter Height Stools】The bar stool is 13"D x 17" W x 24"H. The height from the top of the fabric to the floor is 24 inches suitable for 36"-39" height counters, kitchen islands, dining tables, or bar tables. The backless design makes these bar stools can be easily stored under the table when not in use and saves space for you..
  • 【Elegant Appearance】This stylish bar stool is decorated with delicate brass-colored nailhead trim making the cushion firm and gorgeous. The dark brown wood chair legs with vivid wood texture and the cushion with off-white linen fabric show unique elegance, fitting in with any modern and traditional decor. Perfect for home, restaurant, bar, pub, bistro, coffee bar, bedrooms, cafe, etc.
  • 【Easy to Assemble】With all necessary hardware and installation manual in the package, you only need 15 minutes to assemble these bar stools by screwing the cushions and the legs together. Tips: Please do not fully tighten all the screws at first, wait until the four legs are level on the floor at the same time, then fully ti....
Check Stock

Home Soft Things Hairpin Metal Table Legs 30 Inch Legs for Furniture Coffee Bench Dining End Industrial Table Desk Set of 4 with Screws Adjustable Cushion Black Floor Protectors 30

  • BOON Living Hairpin Table Legs are designed specifically for DIYers, makers, and professionals. These hairpin metal legs are heavy duty proofed and will add both stability and mid-century modern style to any and all furniture projects..
  • STYLISH FINISHES! These legs are black powder coat finishes. We stock leg sizes for any project for 6",10", 15", 18", 20", and 30"..
  • The Serenta Hairpin Table Leg brackets measure 5.6" x 5.6"..
  • EASY INSTALLATION! Each leg has 4 pre-drilled holes in the mounting plate that allow for easy installation. Screws are included. Tools are NOT included..
  • SUITABLE FOR ANY PROJECT! You are able to build any number of designs including cabinets, coffee tables, benches, bedside tables, desk/dining tables, counter tables, nightstands, end tables, kitchen tables, and bar!.
  • ASSEMBLY REQUIRED - These table legs were designed for do-it-yourself installation. You are able to attach the legs to any surface to create the design of your choosing!.
Check Stock

VASAGLE Nightstand with Drawer Set of 2, End Table, Bed Side Table, Small Table, Tall Night Stand with Fabric Storage and Shelf for Bedroom, Dorm, Easy Assembly, Rustic Brown and Black ULGS221B01

  • [Ample Storage] With 2 open shelves and 1 fabric drawer, these nightstands offer within-reach storage for your lamp, water glass, and remotes and out-of-sight storage for those easy-to-get-messy cables, pens, and your little secrets.
  • [Serve Many Places] Make them end tables next to the couch in the living room, bedside tables in the bedroom, or add handy storage in the hallway—these 2 stylish tables round off your space in any way.
  • [Ideal Height] 24” tall, this set of side tables matches most beds and makes it easier for you to grab the stuff on the tables when you’re in bed.
  • [Sturdy & Stable] Made with particleboard, a steel frame with an X-bar, a durable non-woven fabric drawer, and balanced by 4 adjustable feet, these end tables with drawer offer firm, stable, and lasting support.
  • [Easy-Peasy Assembly] With easy-to-follow instructions and labeled parts, you can assemble these bedside tables before you know it.
Check Stock

Paladone PlayStation Metal Drink Coasters - Set of Four - Game Room Decor

  • PROTECT YOUR TABLES: The perfect accompaniment for your drinks! Protect your tables, desk, bar, and other surfaces with the help of these brilliant PlayStation Metal Coasters.
  • DRINKING FUN: A great way to have fun, entertain, and break the ice at parties, this set of coasters is a great way to start a conversation about your favourite games by PlayStation.
  • COOL DESIGN: Impress your friends and gamers with this set of corked-back metal coasters which features an embossed design of PlayStation’s iconic controller buttons.
  • PROTECTION: Protect tables, desks, bars, and other surfaces from the stains, scratches, and coffee rings that come from glasses, cups, and mugs with coasters! Use this set for hot and cold drinks.
  • SPECIFICATIONS: This pack contains 4 corked back metal coasters that won’t scratch your coffee table. The PlayStation Metal Coasters are an officially licensed product.
Check Stock

Anodized Aluminum Miter T Track w/T-Bar Rail for Jigs Fixtures Sleds Router Tables and General Woodworking 32 inch MADE IN THE USA

  • When building sleds or fixtures, workshop tables, router table tops or any type of jig or fixture that helps hold stock in place or helps feeding stock through a cutter, miter t track will help make it so much easier. Miter T Track does this by allowing devices like miter gauges to effortlessly slide through the track for cutting applications and it can also accept fixtures with the proper hardware like featherboards to keep your stock firmly against a fence..
  • The Miter T Track has a “T” shape to it so that it can accept the discs on the ends of many miter gauges. This essentially means that your ¾” x 3/8” bar on your miter gauge will fit neatly into this track even with the disc on the end. Of course you don’t have to have a bar with the disc on the end. Wether you’re making a table top for your router, your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!.
  • The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards wher....
Check Stock

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots.
  • Dual Slide Motion-side to side and forward action for quick and easy setup.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences.
  • Split rail miter bar construction-provides maximum hold.
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences.
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

Yahpetes Heavy Duty Hairpin Furniture Legs 16' Metal Legs 3-Rod Hairpin Legs with Screws and 4 Pcs Bonus Rubber Floor Protectors Metal Home DIY Projects (16')

  • Wide Application----Match the metal legs with the tabletop of your choice. DIY one piece unique modern funiture for your home.3-rod design makes the industrial appearance more modern, very suitable for any project,especially for DIY home improvement hardware, such as cabinets, coffee tables, benches, bedside tables, desk/dining tables, counter tables, bedside tables, end tables , kitchen table and bar.For both indoor and outdoor..
  • Package Content----4 x 16 inch hairpin table legs, 4 x floor protection pads, 20 x screws.The accompanying hairpin table leg protector can protect your floor from damage..
Check Stock

4PCS 24 inch Black Round Cocktail Tablecloth with Stretch Spandex Table Cover for Fitted Bar Wedding Cocktail Table

  • ...on: the round tablecloth stretch is suitable for the table surface with a diameter of 32 inches and a height of 43 inches.
  • The elastic spandex material and elastic edge design at the bottom can cover the cocktail table firmly, which fits smoothly and is not easy to slide or deform.
  • It is easy to turn ordinary metal tables into fashionable furniture.
  • Double Oxford Elastic Foot Pockets: our cocktail round tablecloth is designed with 4 heavy double Oxford elastic foot pockets, which is suitable for high top tables with 4 legs or square base, such as high top cocktail table, high bar and folding cocktail table.
  • Multifunctional: this spandex tablecloth is simple to use, can shorten the decoration time as it can be folded and stored.
  • It is widely applied for dessert table, display table or any special occasion, such as wedding, bar, party, restaurant and outdoor exhibition.
  • Easy to Use and Clean: this bar tablecloth is easy to clean and can be reused after drying.
  • In addition, you can carry out fine circulation cleaning in cold water by hand or machine, and then air dry.
Check Stock

WiseBond - Clear Table Top Epoxy Resin Kit, Durable Resin Epoxy for Countertops, Bars, and Tables, 2 Part Epoxy with 1:1 Ratio Clear Cast Countertop Epoxy Kit, Food Safe Epoxy, Set of 2, 1 Gallon Kits

  • Commercial-Grade, Ultra-Clear Epoxy Countertop Kit - Get the finest bar and table top epoxy kit ready and waiting. It flawlessly pours and cures into a 1/8-inch-thick finish coat for bar tops, tables, river tables, and most any table or countertop surfaces.
  • Suitable for A Clear or Tinted Finish - This clear epoxy resin cures into a bubble-free, crystal-clear appearance, but feel free to add pigment to your wood epoxy projects. Mix our powdered or liquid colorants in this crystal clear resin for a tinted casting resin finish..
  • Easy 2:1 Mixing Ratio - This clear resin epoxy kit has a 1:1 mixing ratio and works indoors without ventilation or apparatus. Each bar top epoxy set includes a resin (part A) and a hardener (part B). Pour between 77°F-85°F with low humidity in a dust-free environment..
  • Pro-Grade Clear Epoxy Resistance - Our table top epoxy resin doesn’t warp or yellow in time. It has the highest UV yellowing resistance and maintains its clarity for a longer duration, unlike other countertop resins on the market..
  • Made By Industry Experts - As experienced manufacturers, we ....
Check Stock

20 Person Tables Training Meeting Seminar Classroom Model 5534 10pc Beech Folding Industrial Caster Z-Base Tables Connect Modesty Panel Shelf Power+USB Outlet Fold+Nest Seating NOT Included .

  • 20 Person Tables Training Meeting Seminar Classroom Model 5534 10pc Beech Folding Industrial Caster Z-Base. Tables connect. Modesty Panel, Shelf, Power+USB outlet. Fold+Nest Storage (Seating NOT included)..
  • Tables have one built-in Power Bar with electrical and USB connections and a popup lid. Multiple tables with their power cords connect together and flexible elastic nets hold the cords up under the top to avoid entanglement..
  • Commercial grade Thermally-Fused Melamine Laminate 1.0” Xtra-Thick tabletop construction extends life in busy training classes with heavy duty edges to protect from bumps and dings. Each individual table measures 72"L x 24"W x 30"H. Each row of tables measures 216"L x 144"W x 30"H..
  • Fully welded heavy duty Z-Base have rich textured Graphite color with casters factory-installed. Simple to assemble base attaches easily to the top for quick setup..
  • All items ship on a secure shipping pallet enclosed in heavy stretch wrap to ensure safe arrival at your street address. NOT INCLUDED in purchase – Liftgate service, inside delivery, assembly, debris removal..
Check Stock