ReviewsBar Turning Tool

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..

Check Stock

Engine Crankshaft Turning Socket Tool, Aluminum, 1/2" Drive, Compatible with Chevy BBC Big Block 366 396 402 427 454

FITMENT - This BBC Crankshaft Socket Fits Chevy Cars with The Big Block Chevy Engines as below: 366 (6.0 L) 1960-1990,396 (6.5 L) 1965-1972, 402 (6.6 L) 1970-1972,427 (7.0 L) 1962-1963,454 (7.4 L) 1970-1976.
BENEFITS - Crankshaft Turning Sockets are a necessity for engine building. This socket slips onto the crank and will make turning your crank a snap,besides non- damaging aluminum tool will rotate the crankshaft in the correct way.
FEATURES - 1/2 Breaker Bar or Drive Ratchet for Rotating the Engine, fits 1. 610 ID crankshaft port with 3/16" keyway.
QUALITY - Corrosion-Resistant & Machined From 6061 Billet Aluminum.
INCLUDES - (1)BBC Crankshaft Socket Tool.

Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
PACKAGE CONTENTS: 32mm and 36mm fan clutch removal tool set includes (2) standard size wrenches (32mm and 36mm spanner sizes) and (1) pulley bar.

Check Stock

OSCARBIDE TCMT21.51 Carbide Turning Inserts TCMT110204 Carbide Inserts 10 Pieces,TCMT Insert Tin Coated CNC Lathe Carbide Cutters Inserts for Lathe Turning Tool Holder Boring Bar

Size: TCMT 21.51(TCMT110204), 3/32" Thick, 1/64" Radius, 7 degrees relief angle.
Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Designed for Steel, cast iron and non-ferrous materials,used for turning and finishing on a wide range of materials.
OSCARBIDE TCMT 21.51 has wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting..
Fit our 1/2”Boring Bar Set Tool Holder or 3/8" Mini Turning Tool Holder or Other Brands the same size carbide inserts, you can search the Asin: B07PLX982C or B07PYSN4JC to purchase set directly..

Check Stock

TJATSE 1/2\ Round Shank Boring Bar Set Premium Indexable Carbide Inserts with Boring Bars CNC Turning Lathe Tool Set for Metal Lathe - 4 Pieces/Set

【Industrial Quality Boring Bar Set】: TJATSE Boring Bar Set are made of Chilled Steel bar holders combine with Tin-coated carbide inserts, sturdy and durable for long time use. Great for semi-finishing on the existing hole cutter, fit boring machine, lathe machine..
【Round Shanks Bar Holder】: Designed with round shank holders which allow the operator to set positve or negative rake, chip breaker eliminates long stringer chips. Positive rake 90-degree lead. Supplied with wrench..
【Indexable Inserts Included】: Come with TCMT21.51 inserts and it can be indexed, when it is dull use another sided, a new cutting edge may be presented by simply indexing the insert. It is versatile and economical..
【Easy Organization And Storage】: Easy reference guide for insert number, screw and other accessories is printed on the tool shank, and The entire turning tool set is contained in a alumium carrying case that protects and organizes each tool and stacks and stores easily..
【TJATSE BRAND WARRANTY】: TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..

Check Stock

Wood Turning tool Carbide Tipped Working Lathe Tools Combo Set Include Finisher Rougher Detailer For Pen Bowl Making,Set Of 3

Combo Set Include: 3 Pieces Wood Turning Tools(Mid Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key.
Dimension：Length of Tool Bar 5.91″(150mm) ，Length of wood handle：9.84″（250mm ），Overall length 15.75″(400mm).
Indexable Replacement carbide insert design:matched with Carbide Cutter (Square15×15 × 2.5mm-R50-30°，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point).
Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening，for wood hobbyist or DIY or carpenter.
Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.

Check Stock

Bike Repair Tool Durable Dog Bone Shape Hexagon Wrench, Zinc Alloy (10 in 1) 6-15mm Bicycle Wrench Heavy Duty Reinforced Spanner, Multifunction Wrench Tool for Mounting Cycling

...odometer,spoke wrench,saddle bag bicycle,bicycle speedometer,small tool kit.High quality zinc alloy, durable and anti-rust,durable and practical.
Fit for Nut Size: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 mm.
PRODUCT SPECIFICATION - Use for various mountain bike,portable bar,hex bar,bike stand repair.Common wrench size for turning a certain size nut, universal for repairing many types of bikes.High quality zinc alloy, durable and anti-rust.Bone wrench total of ten holes, convenient and easy to carry 10 in one, the 10 hexagon holes size from 6mm to 15mm..Size : Approx. 9.3cm/3.66".
Compact bone shape design, light weight, convenient to carry, a perfect tool for emergency need while riding.
100% SATISFACTION CUSTOMER SERVICE - Use for tire repair kit,allen key set,mountain bikes,assault bike,road bike,tool kit for women,bar tool set.Lightweight and portable.Must-have regular maintenance and emergency repair tool for bicycle enthusiasts.Compact and easy to carry, it can be attached to the bicycle for local small-scale maintenance when traveling.Package included:1 x Bike Bicycle Bone Shape Spanner Wrench Repair Tool.
7-15 days shipping date with tracking number.

Check Stock

MAXTOOL 2PCs 16NR12ACME Internal American Acme Indexable Threading Inserts 3/8\ I.C. 12 TPI Carbide TIALN-Coat; 16NR12ACME-T02

♥Package includes ：11pcs 16IR A60 inserts, 1pc SNR0013M16 holder, 1pc wrench T15.
♥Turning holder : tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade..
♥16IR inserts pitch : AG60 60°, machining pitch range: 0.5mm~3.0mm. Inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
♥Holder Cutting direction: Right, Shank Diameter :1/2" inch ≈ 13mm, Over Length: 6" inch ≈ 150mm.
♥Package: The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..

Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
The 40Cr steel material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
each tool holder has a black oxidized smooth surface..
●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..

Check Stock

Robert Sorby 67HS 6 Piece Lathe Turning Set with 3/4\ Spindle Roughing Gouge, 3/8\ Spindle Gouge, 3/8\ Bowl Gouge, 3/4\ Standard Skew Chisel, 1/8\ Parting Tool and 1/2\ Round Nose Scraper 67HS

Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you’ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately.
The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O’Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125” in diameter..
The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The....

Check Stock

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

【Upgraded Carbide Turning Tools Material】High-density tungsten carbide blades are made with high-speed steel blade material which will not wear off easily, stainless steel aluminum handles and a beautiful aluminum alloy case with sponge liner, excellent ergonomics and reliable grip, increased stability and shock resistance.
【Adjustable Aluminum Handle Length】You can freely adjust the length of wood turning tools for lathe according to your preference, just fasten the two screws of the lathe turning tools with the accessory wrench then you can work which is convenient and flexible.
【Replaceable Carbide Blade&Adjustable Sharpe Edges】Our carbide lathe tools matching carbide blades can be replaceable and we provide you with new cutting inserts and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasti....

Check Stock