ReviewsBarb Fitting Adapters

ProMaker Home Brewing Stainless Steel Diffusion Stone Inline oxygenation Aeration Aerator Kit Oxygenation Diffuser for Wort Chiller Kettle Pump Beer Brewing Stone Kit

  • 【High Quality】:Stainless Steel 2 micron diffusion stone and parts make it more durable and keep beer fresh taste.
  • 【Aeration and Oxygenation Kit】:1/2'' MPT Homebrew Inline Aeration/Oxygenation Diffusion Stone with barb fitting,full Kit comes ready to assemble to your equipment.
  • 【 Brewing Tools】Oxygenate wort thoroughly to insure a healthy fermentation and carbonate quickly,connects inline with third fitting connected to your oxygen regulator. The oxygen stone will aerate your wort as they flow through..
  • 【Simple Assembly】:1/4" barb inlet for oxygen regulator or air pump connection,1/2" Hose barbs for beer flow,it can connects inline with any Kettle, Pump, or counterflow/plate wort chiller.
  • 【Package Include】:1* Stainless Diffusion stone + 1*Stainless tee fiting + 2*Hose barb Fitting.
Check Stock

Mars 11917

  • Panel-mounted, barbed fitting allows tube connection on the side of a barrier.
  • Fitting connects to tubing on one end and a female connector on the other.
  • Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
  • Buna-N O-ring elastomer seal for long cycle life and repeatable, leak-free connection.
  • Single-barb for increased pull-off resistance compared to three-barb styles.
Check Stock

Cole-Parmer Barbed Fittings, Reducing Connector, PP, 3/4\ x 3/8\ ID, 5/pk

  • Sterilization method: ethylene oxide (eto) or gamma.
  • Barb size / tubing id (port 1) (inchshort): 0.75.
Check Stock

Cole-Parmer Barbed Fittings, Reducing Connector, Natural PP,1/2\ x 5/16\ ID, 3/16\

  • Sterilization method: ethylene oxide (eto) or gamma.
  • Barb size / tubing id (port 1) (inchshort): 0.5.
Check Stock

YuanTenhwy 3 PCS 3/8 10mm Brass Hose Barb Tee Fittings With 9 PCS Stainless Steel Clamps For Air/Water Hose Splicer 3-Way-T…

  • 【Size】: The outer diameter of Hose barb fitting is 3/8 inch (10mm).
  • 【Packing list】: 3 PCS of 3-way(Type T) Hose barbs fitting with 9 PCS of stainless steel hose clamp.
  • 【Material】: The hose barbs fitting is made of brass, and the hose clamp is made of stainless steel.
  • 【Features】: corrosion resistance, dimensions in line with standards, and overall smooth without burrs.
  • The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak.
  • 【Application Scenarios】:It is applicable to pipeline installation and maintenance, and is often used to assist in the transportation of gas, water or oil. However, federal laws do not allow the installation of these fittings for drinking water in the United States and its territories..
Check Stock

Cole-Parmer Barbed Y-Connectors, Polyethylene, 1/2\

  • Sterilization method: ethylene oxide (eto) only.
  • Barb size / tubing id (port 3) (inchshort): 0.5.
  • Barb size / tubing id (port 2) (inchshort): 0.5.
Check Stock

Cole-Parmer Barbed Y-Connectors, Nylon, 1/4\

  • Sterilization method: ethylene oxide (eto) only.
  • Barb size / tubing id (port 3) (inchshort): 0.25.
  • Barb size / tubing id (port 2) (inchshort): 0.25.
Check Stock

Barbed Y Connector, PVDF, 1/8\

  • Sterilization method: autoclave or ethylene oxide (eto).
  • Barb size / tubing id (port 1) (inchshort): 0.125.
  • Barb size / tubing id (port 3) (inchshort): 0.125.
Check Stock

Cole-Parmer Barbed Y-Connector, PP for 14 mm ID Tubing, 10/Pk

Check Stock

Barbed Y Connector, PVDF, 3/16\

  • Sterilization method: autoclave or ethylene oxide (eto).
  • Barb size / tubing id (port 1) (inchshort): 0.1875.
  • Barb size / tubing id (port 3) (inchshort): 0.1875.
Check Stock

Cole-Parmer PVDF Barbed Y Connector, 1/8\

  • Sterilization method: ethylene oxide (eto) only.
  • Barb size / tubing id (port 3) (inchshort): 0.125.
  • Barb size / tubing id (port 2) (inchshort): 0.125.
Check Stock