ReviewsBarb Hose Fittings

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....

Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....

Check Stock

DERPIPE Stainless Steel 1/4 Hose Barb 3 Way Tee T Shape Union Barbed Splitter Fitting （pack of 2

Size: 1/4"Barb x 1/4"Barb x 1/4"Barb (6mm)..
Material: 304 stainless steel cast pipe fitting ,heavy duty,last for long lifetime,resistant to corrosion,low magnetic permeability..
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, etc..

Check Stock

Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T

Packaging Includes：2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
Solid Connections:The T shaped hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..

Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....

Check Stock

ANPTGHT Hose Barb Fitting Elbow 3/8 Hose Barb x 1/2 Male NPT Barbed Adapter for Fuel Gas Liquid Air Pack of 5

【Material】Plastic barb connector, made of high-quality PP（Polypropylene） material.
【Size】3/8" Hose Barb x 1/2" Male Male thread..
【Usage】Plastic hose barb can be easily connected with tubing hose line and female thread..
【Advantage】 Barbed fittings can be used with PVC, PU, Rubber hose or tubing Easy to install and not easy to drop off, good strength and durability..
【Wide range of use】Suitable for applications in pharmaceutical, food and beverage, laboratory and others..

Check Stock

ANPTGHT 5/16 Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air

【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability..
【Size】5/16"Barb x 5/16"Barb x 5/16"Barb, Can be connected with 5/16" Hose ID..
【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose..
【Applicability】 Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi..
【Usage】 Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc..

Check Stock

ANPTGHT 1/4 Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air

【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability..
【Size】1/4"Barb x 1/4"Barb x 1/4"Barb, Can be connected with 1/4" Hose ID..
【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose..
【Applicability】 Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi..
【Usage】 Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc..

Check Stock

ANPTGHT 3/8 Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air

【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability..
【Size】3/8"Barb x 3/8"Barb x 3/8"Barb, Can be connected with 3/8" Hose ID..
【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose..
【Applicability】 Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi..
【Usage】 Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc..

Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Metalwork 2\ Tri Clamp to 1\ Hose ID Barbed Adapter SUS304 Sanitary Hose Pipe Fitting

Adapter for connecting pipes or fittings of different types.
Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.

Check Stock