ReviewsBarb To An Fitting

ANPTGHT Plastic Hose Barb Fitting 3/8 Barb X 1/4 NPT Male Thread Adapter Connector Pipe Fittings for Fuel Gas Liquid Air Pack of 5

  • 【Material】 Plastic barb connector, made of high-quality PP(Polypropylene) material.
  • 【Size】3/8" Barb X 1/4" NPT Male Thread.
  • 【Product】Fitting connects to hose on one end and has an NPT male connector on the other..
  • 【Features】Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule..
  • 【Use】Suitable for applications in pharmaceutical, food and beverage, laboratory and others..
Check Stock

Mars 11917

  • Panel-mounted, barbed fitting allows tube connection on the side of a barrier.
  • Fitting connects to tubing on one end and a female connector on the other.
  • Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
  • Buna-N O-ring elastomer seal for long cycle life and repeatable, leak-free connection.
  • Single-barb for increased pull-off resistance compared to three-barb styles.
Check Stock

YuanTenhwy 3 PCS 3/8 10mm Brass Hose Barb Tee Fittings With 9 PCS Stainless Steel Clamps For Air/Water Hose Splicer 3-Way-T…

  • 【Size】: The outer diameter of Hose barb fitting is 3/8 inch (10mm).
  • 【Packing list】: 3 PCS of 3-way(Type T) Hose barbs fitting with 9 PCS of stainless steel hose clamp.
  • 【Material】: The hose barbs fitting is made of brass, and the hose clamp is made of stainless steel.
  • 【Features】: corrosion resistance, dimensions in line with standards, and overall smooth without burrs.
  • The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak.
  • 【Application Scenarios】:It is applicable to pipeline installation and maintenance, and is often used to assist in the transportation of gas, water or oil. However, federal laws do not allow the installation of these fittings for drinking water in the United States and its territories..
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Cole-Parmer Barbed Fittings, Reducing Connector, PP, 3/4\ x 3/8\ ID, 5/pk

  • Sterilization method: ethylene oxide (eto) or gamma.
  • Barb size / tubing id (port 1) (inchshort): 0.75.
Check Stock

Cole-Parmer Barbed Fittings, Reducing Connector, Natural PP,1/2\ x 5/16\ ID, 3/16\

  • Sterilization method: ethylene oxide (eto) or gamma.
  • Barb size / tubing id (port 1) (inchshort): 0.5.
Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

  • Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
  • Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
  • When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
  • Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..
Check Stock

1/4'' Swivel Flare Nut x 3/8'' Barb

  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
  • Connections:Hose Barb x Hose Barb x Hose Barb,3/16"x3/8"x3/16".
  • T reducing barbed fitting has three openings for connecting your hoses..
Check Stock

Dorman 84949 Electrical Switch Modular Mounting Panels Right Center Left, 3 Pack

  • Panel-mounted, barbed fitting allows tube connection on the side of a barrier.
  • Fitting connects to tubing on one end and a male connector on the other.
  • Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
  • Single-barb design for increased pull-off resistance compared to three-barb styles.
  • Nickel-plated brass hex nut included for secure fit.
Check Stock

DERNORD 2 Pack Stainless Steel Hose Barb 3 Way Tee T Shape Barbed 3/4” Union Home Brew Fitting 3/4”Barb x 3/4”Barb x 3/4”

  • Size: 3/4”Barb x 3/4”Barb x 3/4”Barb (19mm).
  • Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
  • Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Metalwork 2\ Tri Clamp to 1\ Hose ID Barbed Adapter SUS304 Sanitary Hose Pipe Fitting

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock