ReviewsBarb To Male Fittings

Legines 1/4 NPT Male to 3/8 Barb Fitting Brass Barbed Adapter Straight Connector 2 pcs

  • Barb adapter for connecting a 3/8" hose to a 1/4" npt male threaded connection of a different diameter.
  • Hose barb on one end and male NPT threads on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock

U.S Solid Brass Hose Fitting Adapter 3/4 Barb x 3/4 NPT Male Pipe Fittings

  • FUNCTION - This 3/4" Barb x 3/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
  • DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
  • THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
  • MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
  • WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

U.S. Solid Brass Hose Fitting, Adapter, 1/4\ Barb x 1/4\ NPT Male Pipe Fittings

  • FUNCTION - This 1/4" Barb x 1/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
  • DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
  • THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
  • MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
  • WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

  • Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
  • -6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
  • The barb can use in 3/8" inner diameter fuel hose..
  • Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
  • Note:Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
  • EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..
Check Stock

OBPFY 4 Set 12mm & 14mm Diameter Banjo Hose Barb Bolt Fittings,Metric Thread Banjo Bolt Brake Fitting Adapter with Copper Washers for Motorcycle Car

  • 【Excellent Fittings】* 2 In 1 Set,12mm & 14mm Banjo Barb Bolt Fittings,Designed for excellent engine system fittings.Each component is precision-machined to exact tolerances for trouble-free performance. Long lasting durability,easy installation..
  • 【Application】* Works for Banjo Bolt Inter Diameter 12mm / 14mm. Suitable for Brake System, Air and Fuel Delivery ,Engine..
  • 【14mm Banjo Fittings & Bolt】* Banjo Internal Diameter: 14mm / 0.55".
  • 【12mm Banjo Fittings & Bolt】* Banjo Internal Diameter : 12mm / 0.47".
  • 【Package】* 2 Sets 12mm Banjo Hose Barb Bolt Fittings + 2 Sets 14mm Banjo Hose Barb Bolt Fittings(with 4 X M14 copper spacer + 4 X M12 copper spacer).
Check Stock

SUNGATOR 12-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter Brass Pipe Fittings Male Threaded End

  • 【PREMIUM MATERIAL】: High quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, 3/8”barb X 1/4”NPT male pipe, 12 pack.
  • 【DURABLE】: The barb fitting is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection.
  • 【FUNCTION】: Barb head for connecting hoses, NPT end used to connect NPT pipes, brass is corrosion resistant which can apply to water, gas, oil and fuel as well as air tools.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
Check Stock

SUNGATOR 6-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter Brass Pipe Fittings Male Threaded End

  • 【PREMIUM MATERIAL】: High quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, 3/8”barb X 1/4”NPT male pipe, 6 pack.
  • 【DURABLE】: The barb fitting is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection.
  • 【FUNCTION】: Barb head for connecting hoses, NPT end used to connect NPT pipes, brass is corrosion resistant which can apply to water, gas, oil and fuel as well as air tools.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
Check Stock

Legines Brass Hose Barb Fittings Assortment Kits Splicer + Male Coupler + 90 degree Male Elbow 65 Pcs

  • Splicer : 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5).
  • 90 Degree Male Elbow: 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT(4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNP(2) 1/2" barb to 3/8" MNPT(2).
  • Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2).
Check Stock

Beduan Stainless Steel 3/4

  • Material: Made of 304 stainless steel, strength and resistance to corrosion..
  • Temperature range from -30 to +150 degrees F..
  • Barbed retracting locks for easy slide-back connecting and disconnecting..
  • This Fitting is 3/4″ barb to 1/2″ NPT male, suitable for pipe with 3/4″ ID..
Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,5/16' Barb x 1/8' NPT Male Pipe Water/Fuel/Air(Pack of 2)

  • Adapter for connecting a hose to a male threaded connection of a different diameter..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • This fittings are used in systems such as agriculture, garden and so on, rugged and durable..
Check Stock