ReviewsBarb To Pipe Thread

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

...g process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MAX AMPS 8.0A SHUT OFF PRESSURE 45PSI/3.1 Bar ON-DEMAND PUMP only turns on when senses pressure changes in line 12 VOLT POWER ONLY 110/115/220 volt will damage the unit - READ ....

✬The barb fitting is made of brass material, chromed surface, prevent rust and durable to use..
✬Thread size: G1/4 (International General)..
✬With hidden silicone ring, perfect for connection and seal. Effectively prevent water and liquid from flowing out..
✬11mm OD, Suitable for 9.5-10.1mm (about 3/8”) ID hose pipe soft tubing. Perfect for connection between water blocks, radiators, water pumps, reservoir and other water cooling system kit..
✬Package Contain: 4Pcs OD 11mm G1/4″ Barb fitting..

Includes 1/4, 5/16 and 3/8 inch barb fittings, fittings are 1/8 inch national pipe thread.
Easy to install with no special tools or skills required.

【3/4 Inch US Standard Faucet Adapter】These faucet adapters are made of eco-friendly plastic and are sturdy and durable. With Washers, it is tight and watertight..
【Barb Design and Lock Cap】The hose adapter connects the 1/4" tubing through the barb part, and locks the tubing through the lock cap part of the adapter, so there are two protections against falling off and leakage..
【Filter Accessories Prevent Clogging】The product is equipped with filter parts, which can intercept large particles of impurities in the water, effectively protect the nozzle and prevent clogging..
【American Standard 3/4" Thread】Female threaded fittings are American Standard 3/4" threads, suitable for 3/4" standard threads (3/4"GHT, 3/4"NH, 3/4"NPT), a wide range of Suitable for garden connectors such as outdoor faucets, hose diverters, garden filters, garden timers..
【Suitable for Many Kinds of 1/4 Inch Hose/Pipe】Suitable for many kinds of 1/4 inch pipe, suitable for 1/4 inch PE pipe, 1/4 inch (outer diameter: 7mm, inner diameter: 4mm) PVC dropper Irrigation Tube, 1/4" (OD: 6mm, ID: 4mm) PU tube..

【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.

【SIZE AND PACKAGING】: 1"barb X 1"NPT male pipe, package includes 2 hose barb fittings, 1 sealing tape, 2 hose clamps.
【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel.

Packaging Includes：2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
Solid Connections:The T shaped hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..

✔ Dripping and Water spray Dual function ,switched off individually,Adjustable water output.
✔Suitable for 4mm/7mm(Inner/Outer diameter) tube.
✔with 1/4'' barb thread connection,can easily connect PE pipe and drippers.
✔Practical, portable and easy to install.