ReviewsBarbed Hose Barbs

Little Giant SPDK Sump Pump Discharge Hose Kit, 1-1/4” Hose – 1-1/2” & 1-1/4” Adaptors, 24-Feet

  • SUMP PUMP HOSE: Sump Pump Discharge kit includes 1-1/4" and 1-1/2" NPT barbed adapters.
  • DISCHARGE HOSE: It is Ideal for discharging water out of a basement sump pit to a safe location outside of the home. Kit includes 24' corrugated polyethylene hose.
  • COMPATIBLE HOSE: It is compatible with sump pumps with 1-1/4 inch FNPT or 1-1/2 inch FNPT discharge. It includes ABS thread x barbed adapter and galvanized steel clamps. IT IS NOT COMPATIBLE WITH GARDEN HOSE FITTINGS.
  • WATER PUMP HOSE DIMENSION: The sump pump discharge hose kit is of opening size 20 x 17 x 5.5 inches.
Check Stock

Air Foot Pedal with 8' long Neoprene Hose & Pressure Switch Combo Set - For Drain Cleaning Machines

  • Fits Ridgid, Spartan, General, Electric Eel and many other Drain Cleaning Machines that use air as an actuator..
  • Package includes: 1 – air foot pedal with 8′ long neoprene air hose, 1 – Pressure Switch Assembly/Air Switch, and 1 – mini hose clamp..
  • Air Foot Pedal: 3/8″ x 8′ long semi-flexible neoprene air hose, Heavy-duty neck on the bulb with a fitted barbed hose fitting insert..
  • Air Switch: Two pole air switch with barbed hose end, 21A 125/250 VAC..
  • Riveted aluminum plate on the bottom of the foot pedal..
Check Stock

Irrigation Fittings Kit Hoomtry Drip Irrigation Barbed Connectors for 1/4-Inch Tubing Flower Pot Vegetable Garden Lawn(Straight Barbs Tees Elbows End Plug 4-Way Coupling)

  • ...on tubing kits total, 80 straight barbs, 68 three-way pipes, 20 elbow fittings, 20 end plugs and 20 four-way pipe joints, the number is sufficient to meet your needs for garden irrigation accessories various needs..
  • No tool required: The lrrigation fittings kit secure, Easy to install without glue, tools, or clamps. Barbed ends grab tubing for a secure leak-proof connection.
  • Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting..
  • Confirm Drip Irrigation Tubing Size: These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.Please check the size carefully before purchasing..
  • Easy to Use: This irrigation fittings kit is made of quality engineering plastics that is durable, strong, water resistant, chemical-resistant for long time using. These drip irrigation accessories work well with the tubing..
  • Excellent customers service: You are not completely satisfied with Hoomtry plastic drip irrigation accessories, just let us know, our goal is for you to be 100% ....
Check Stock

Five Oceans FO4277 Brass Fuel Hose Barb 1/4 inches NPT Thread x 3/8 inches Hose, Crafted for Fuel Systems, Sharp-Edged Barbs, For Any Portable Tank

  • This Five Oceans Fuel line connector can be installed with confidence using our pipe-to-hose fittings..
  • Perfectly crafted for fuel systems, these pipe hose fittings are the ideal use for any portable tank..
  • This machined brass fitting features a male 1/4 inches NPT thread and sharp-edged barbs for 3/8 inches hose to provide excellent grip. Brass construction resists corrosion..
  • Barbs provide excellent gripping power for fuel line connections.
  • We recommend the use of fuel compatible thread sealant to prevent galling and provide the best possible connection.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Dixon DCP2144B Brass Air Chief Industrial Interchange Quick-Connect Air Hose Fitting, Plug, 1/4\ Coupling x 3/8\ Hose ID Barbed

  • Air Chief industrial interchange quick connect coupler for connecting directly to a hose with barbed hose ID end for a greater hold on the hose.
  • 1/4" Air Chief industrial interchange quick connect plug with a 3/8 "ID barbed hose end.
  • Valveless construction allows flow when disconnected.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).
Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

  • Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
  • Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
  • When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
  • Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..
Check Stock

Habitech Irrigation Fittings Kit for 1/2 Tubing - 20 Piece Set - 6 Tees 6 Couplings 2 Elbows 6 End Cap Plugs - Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems

  • Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6....
  • These 17mm barbed fittings work with half inch drip tubing from 0.560 to 0.600 Inside Diameter (ID). Compatible with many types of Rainbird, Orbit,....
  • The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. These 17mm drip fittings are made with....
  • Save money and time buying everything you need at once in this 20-Piece Set. Jumpstart your drip irrigation system installation with this set of....
  • Easy and secure installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If....
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

Northern Brewer - Silver Serpent Stainless Steel Immersion Wort Chiller

  • A simple tweak, adding barbed fittings and a drop-angle to our favorite immersion chiller, spawns a new best-in-class product. Introducing Silver....
  • Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
  • Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
  • Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
  • Comes fully assembled with tubing, barbed fittings, and hose clamps..
Check Stock

Rain Barrel Connector Kit

  • Includes two stainless steel hose clamps, one 3' long x 3/4" diameter hose, two poly hose barbs, and two 1/2" bulk head assemblies.
Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

  • APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
  • ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
  • HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
  • -30 degree to 100 degree F temperature range..
  • BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
  • Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock