ReviewsBare Meter Cable

DTECH 5M Ultra Thin Flat Type Computer Monitor VGA Cable Standard 15 Pin Male to Male Connector SVGA Wire 16 Feet - Black

  • Thin VGA to VGA Cable connects PC or laptop to the projector, LCD monitor, and other any video display system with 15-pin VGA port.
  • VGA wire with Ultra Thin Flat Design - This flexible computer monitor cable (male to male) is ideal for applications where space is tight or for running under carpet over 15 ft.
  • Gold-plated connectors resist corrosion and improve the signal performance.
  • Cable shielding protects against EM and RF interference.
  • Bare copper conductors enhance cable performance.
  • 15 pin VGA monitor cable for computer is with inner conductor: 3 x coax (RGB) + 6 sync lines for high quality video signal transmission.
  • Shield 16 Feet (5 Meters) 15-pin D-usb cable ends screw in to ensure a strong connectionDescriptionHigh-Quality Engineering.
  • Experience a reliable, high-quality connection with this convenient VGA to VGA cable (male to male) from DTECH. The computer VGA cable links any 15 pin connector VGA-equipped desktop or laptop computer to a computer monitor, display, or projector with a 15-pin VGA port..
  • If you need a VGA monitor cable 15 long, this VGA male to VGA male cord is ideal for at home or work, the 15 pin monitor cable creates a reliable connection for anything from gaming to video editing or video projection..
Check Stock

HFBTE LCR Meter Inductance Resistance Capacitance Tester Digital Bridge Meter with Testing Frequency 100Hz 120Hz 1KHz 10KHz 40kHz 100KHz Basic Accuracy 0.3%

  • LC200A portable meter is based on the LC resonant principle, adding high-speed micro-controller precision measurement calculation. The meter has wide measurement range and high precision, it's measuring range is below 1uH and 1pF. Wide measurement range, high accuracy, small size, light weight and portable..
  • LC200A series can be powered by mini USB cable or included Φ5 DC power supply cable. Note: The power supply voltage is 5V. You can also install 4 AA batteries to power the meter. If the meter is not used for 5 minutes when it is battery powered, it will automatically turn off the power..
  • There are five buttons. They are reset button in red, Hi.C, Hi.L, L/C and extended FUNC button in blue. Just press red the button to calibrate. Open circuit calibration in capacitance measuring mode. Short circuit calibration in inductance measuring mode..
  • Capacitance: 0.01pF-100mF. Inductance: 0.001uH-100H. Frequency: 500KHz/500Hz-50KHz. Accuracy 1% of capacitance range 1pF~1uF, 5% of range 1uF~100mF, 1% of inductance range 1uH~1H, 5% of range 1H~100H..
  • Package include: 1 x handheld LC meter, 2 x banana plug to alligator clip test leads, 1 x LCR kelvin alligator clip test lead, 1 x USB cable, 1 x charging cable, 1 x manual..
Check Stock

Browning BR-8X-18 18-Feet Heavy-Duty CB Antenna Cable

  • 100% Shield Coverage - 95% Bare Copper Braid, Plus Full Aluminum Foil Shield.
Check Stock

SKYRC iMAX B6 Mini Professional Balance Charger / Discharger for RC Lipo Battery Charging

  • Lithium Battery Meter: Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell..
  • Internal Resistance Meter: Use this function to measure the resistance in each of your lithium battery's cells. This helps determine the health of your cells, to be sure you are getting the most power out of them..
  • This charger and the battery should be put on a heat-resistant, noninflammable and nonconductive surface. Never place them on a car seat, carpet or similar. Keep all the inflammable volatile materials away from operating area..
  • Genuine, Authentic, Original iMax B6 Mini Charger by SkyRC w/ Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC's website to prove its authenticity..
  • Package Contains: 1x SKYRC B6 mini Charger.
  • 1x T Plug with Banana connector Charging Cable.
  • 1x DC Cable with Alligator Clip Charging Connector.
  • 1x T Plug with Alligator Clip connector Charging Cable.
  • 1x T Plug with Futaba connector Charging Cable.
  • 1x T Plug with JST connector Charging Cable.
  • 1x T Plug with XT60 connector Charging Cable.
Check Stock

Mophorn AI-9 Fiber Fusion Splicer with 5 Seconds Splicing Time Melting 15 Seconds Heating 7800mah Fusion Splicer Machine Optical Fiber Cleaver Kit for Optical Fiber & Cable Projects

  • 【3 IN 1 FIBER HOLDER】- SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable. Applicable Fibers:SM(G.652&G.657).
  • NZDS(G.655). Splice Loss: 0.025dB (SM), 0.01dB(MM) 0.04dB (DS/NZDS). Coating Diameter：100-1000μm, Cladding Diameter：80-150μm..
  • 【5” TFT DISPLAY】- It adopts 5-inch 800x480 high-resolution screen, and the operation graphics are simple and intuitive which ups to 300 times focus amplification. Once splicing times reach from 48000-60000 times, free to change a new machine.
  • 【BUILT-IN POWER METER & VFL】- Using the latest core alignment technology with auto-focus and six motors. It is more precise and less splicing loss than cladding alignment technology. Effectively measure connection loss,verify continuity and help assess fiber link transmission quality..
  • 【7800MAH LITHIUM BATTERY】- 7800 mAh high-capacity lithium battery, charging time ≤ 3.5 hours,continuous splicing and heating about 200 times..
  • 【USED BROADLY】- This Intelligent and convenient machine can be connected to mobile app, and supports ten languages: English, French, Russia, Italian, Portuguese, polish, Spanish, Thai, Arabic. It is especially suitable for optical fiber and cable projects, maintenance scientific research, railwa....
Check Stock

Tenergy TB6-B Balance Charger and 5-in-1 Battery Meter for 1S-6S Digital Battery Packs, Charger for NiMH/NiCD/Li-PO/Li-Fe Packs

  • One charger for many battery packs - The Tenergy TB6-B balance charger/discharger and 5-in-1 battery meter bundle offers detailed charging and discharging features for all LiPo/LiFePO4/Li-ion battery packs. Get full detailed battery pack health information with the meter, and full charging/discharging capabilities with the TB6-B balance charger..
  • Multiple connector harness - Tenergy's AC balance charger can recharge battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added..
  • Wide voltage compatibility - The smart charger is compatible with NiMH/NiCd 1.2V-18V (1S-15S), 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), and 9.6V, 12.8V, 16V. SLA 2V-20V..
  • Multi-purpose battery meter - Tenergy's 5-in-1 cell meter is a great addition to any habby charging arsenal, the meter estimates voltages for LiPo/LiFePO4/Li-ion (2-7 cells) packs and NiCd / NiMH batteries for TX and RX (4-7 cells). The battery capacity checker requires no additional accessories and is powered by the testing battery pack to quickly evaluate the pack's capacity.
  • use the battery checker to evaluate the health of your battery pack and decide when to discard or re....
Check Stock

StarTech.com 3m Fiber Optic Cable - Multimode Duplex 62.5/125 - LSZH - LC/ST - OM1 - LC to ST Fiber Patch Cable (FIBLCST3)

  • Connect fiber network devices for high-speed transfers with LSZH rated cable.
  • 3 meter Duplex Fiber Cable / LC to ST / Multimode Patch Cable / 3m Multimode 62.5/125 Duplex Fiber Optic Cable LC to ST.
Check Stock

High Grade Subwoofer Cable, 3 Meters, 9.8 Feet

  • Specifically designed for subwoofers to achieve optimum performance.
  • Flexible CL3 Rated PVC Jacket – offers strain relief for sharp turns.
  • Double shielded | Shield 1: Bare Copper, Convolved | Shield 2: Bare Copper, Braid.
  • Length: 3 Meters (9.8 ft.) | Cable Gauge: 22 AWG | Connector: Gold Plated RCA.
  • Center Conductor: Bare Copper Wire | Insulation: PVC.
Check Stock

Winegard RFL-332 SensarPro TV Signal Strength Meter, Black, 4.5 Inch

  • Includes: TV Signal Strength Meter with Adapter Kit, and a Coaxial Cable.
  • Perfect For: Provides you with an over the air signal strength meter for digital TV antenna – designed for terrestrial digital television broadcast.
  • Features: The signal finder meter flaunts an impressive LED feedback display, sensitivity adjuster and coaxial Cable for an easy installation.
  • VERSATILITY – Perfect for positioning stationary mounted antennas or can be used by travelers in RV’s looking to aim your directional antenna towards better signals in new or unfamiliar areas.
  • Quality Assurance: DTV signal finder Includes a US manufacturers warranty.
Check Stock

FiberCablesDirect - 0.5M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 0.5 Meter (1.64ft) | Length Options: 0.5M-300M | 1g 10g sfp+ 10gbase lc/lc dplx Yellow PVC ofnr lc-lc

  • Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 0.5 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 0.5 Meter (1.64 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflec....
Check Stock

FiberCablesDirect - 12M OM1 LC LC Fiber Patch Cable | 1G Plenum Duplex 62.5/125 LC to LC Multimode Jumper 12 Meter (39.37ft) | Length Options: 0.5M-300M | Made In USA | 1/10g mmf sfp 1gbase ofnp lc-lc

  • Fiber Cable Description: OM1 LC to LC Plenum Fiber Patch Cable 12 Meter | OFNP Duplex LC LC Multimode Fiber (MMF) Patch Cable 62.5/125 Corning optical fiber core/cladding. Ceramic ferrule LC fiber connectors. High bandwidth fiber for high speed, low loss, data transmission. Orange, 2.0mm outer diameter, zip-cord reinforced, jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 12 Meter (39.37 feet), Duplex (2 fiber), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic cor....
Check Stock