ReviewsBaseboard Diffuser 1inchs

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Zero Clearance End Cap)

  • Baseboarders Premium Series Zero Clearance caps are symmetrical, there are no left or right sides. Used when the original back plate terminates within ½” of adjacent wall. Designed to snap onto the ends of Premium Baseboarders.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher....
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover, No Accessory)

  • Baseboarders Elliptus Series Panel only includes the replacement heater panel cover. Baseboarders Elliptus Series Endcaps (Closed EC005-LF,RT-WHT, Open EC006-LF,RT-WHT, Zero ZC005-WHT) are sold separately. When combined with end caps the panel can span between 24”-27.5”.
  • Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electri....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Closed End Cap - Right)

  • Baseboarders Premium Series Closed End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that bend down into the floor or back into the wall. They do not continue into an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard hea....
Check Stock

Dimplex 50' Linear Convector Electric Baseboard Heater Model: LC5020W31), 240V/208V, 2000/1500W White

  • 2000W, 240V, 50", White, Baseboard Heater, 42% Shorter Than Traditional Baseboard, 40% Faster Heat Flow, Responds Quickly To Changes In Temperature.
  • Manufactured In China. Heater Type: Conventional Baseboard Heaters.
Check Stock

HIPTIS Baseboard Cleaner, Wall Cleaner with Ajustable 54'' Long Handle 4 Reusable Cleaning Pads for Baseboards Cleaning, Ceiling & Wall Clean in Minutes

  • Why Choose Us - HIPTIS wall cleaning tool is an unique patented design. It combines the functions of flat wall cleaning and baseboard cleaning, which is better than most in the market. Upgraded baseboard cleaner tool (Convex design) special design to clean your baseboards and moldings with ease..
  • Flexible Cleaner Head - 360 degree SWIVEL action lets you clean from any angle. It is conforms to any baseboard or door molding, especially cleaning the corner.And reinforced splice design keeps the mop head from collapsing or flipping around when sweeping high places..
  • Free Your Knees and Back - Anti-rust aluminum handle of HIPTIS Baseboard Cleaner is lightweight and adjustable. The handle can be extended up to 4.5 feet to accommodate various heights. The pole is equipped with a soft sponge handle, which has good anti-slip effect. Use the extension handle to clean hard to reach places. SAVE YOUR KNEES AND BACK..
  • Comes with 2 Microfiber Pads & 2 Chenille Pads - The cleaning head uses a paste design, which can change the microfiber or chenille pads at any time according to your cleaning needs. Change the pad in second! O....
Check Stock

Fahrenheat F2544 4' BASEBOARD HEATER , white

  • Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling..
  • Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp..
  • For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked..
  • This baseboard heater installs unobtrusively in bedrooms, bathrooms, living rooms and dens, thanks to its low-profile design..
  • This baseboard model is UL listed to provide safe heating even when mounted flush to the wall or directly on flooring, tile or carpet..
Check Stock

Cadet 30 115/120 Volt 1,280/1,706 BTU White Baseboard Heater

  • Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling..
  • Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp..
  • For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked..
  • This baseboard heater installs unobtrusively in bedrooms, bathrooms, living rooms and dens, thanks to its low-profile design..
  • This baseboard model is UL listed to provide safe heating even when mounted flush to the wall or directly on flooring, tile or carpet..
Check Stock

Fahrenheat F2514 4' 120V Baseboard Heater, 48\ Wide, Northern White

  • Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling.
  • Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp.
  • For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked.
  • This baseboard heater installs unobtrusively in bedrooms, bathrooms, living rooms and dens, thanks to its low-profile design.
  • This baseboard model is UL listed to provide safe heating even when mounted flush to the wall or directly on flooring, tile or carpet..
Check Stock

Fahrenheat PLF504 Baseboard Heater, Navajo White

  • This convection heater starts up and stops without the disruptive popping or pinging sounds given off by traditional baseboard models..
  • Keep dust and other particles from circulating, thanks to this hydronic baseboard heater's fanless operation. With no blower or exhaust fan, allergens and dander won't be blowing around the room..
  • For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked..
  • Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp. You can connect it to power from either side or even chain multiple units together..
  • Hard-wired unit. 28-in. length. 240 volts, 500 watts, 4.2 amps. Field-installed thermostat..
Check Stock

Cadet F Series 30\ Electric Baseboard Heater (Model: 2F500-1W Part: 05530), 1710 BTU, 120 Volt, 500 Watt, White

  • Powerful: At 500 Watts and 120 Volts, this baseboard heater provides powerful heat to small rooms..
  • Simple: Universal wiring and pre-punched knockouts at 1-inch intervals make floor or wall mount installation easy and low cost..
  • Safe: The electric baseboard heater includes a high-temperature safety shutoff feature to keep your home and family out of harm's way..
  • Contents: Includes one Cadet F Series 30" Electric Baseboard Heater without a thermostat in white..
  • Durable: Enjoy lasting service with a limited lifetime warranty..
Check Stock

Duzzy Flexible Baseboards Molding Trim, 4 Inch(W) x 16.4 Feet(L) Self-Adhesive Wall Base Boards Moulding Trim Molding, Peel and Stick Baseboards for Wall Base Cove Base (Cream White)

  • [Peel and Stick Baseboard] 2/5 Inch(thickness) x 4 Inch(width) x 16.4feet(length). Duzzy Baseboard wall molding has a three-dimensional relief pattern, which is very vivid. Wall trim makes your interior decoration no longer monotonous. The self adhesive frame that can be glued to glass is suitable for most home decoration styles..
  • [Widely Applicable] The baseboard molding can be used for home wall trim decoration. Based on good adhesive properties, it is suitable for most smooth surfaces, such as: bathroom/dining/bedroom skirting, base board, ceiling, wall coner edge and so on..
  • [Easy to Install & Remove] The self-adhesive baseboard trim comes with adhesive, you only need to cut it to a suitable length before installation and remove the back tape. The installation can be completed in one minute. If you want to replace the basebroad trim, you can use the hot air of a hair dryer to soften it first, and it is not easy to damage the surface of the furniture after it is slowly torn off..
  • [Durable and Flexible] Molding trim wall tirm is made of high density NBR foam cotton, which will not fade, deform and high resilience afte....
Check Stock