ReviewsBaseboard Heater Deflector

Sterling Heatrim Baseboard RA-ECR-03 Heatrim Hydronic Baseboard Heater End Cap, Right, 3'

  • Manufacturer: STERLING HEATRIM BASEBOARD.
  • Heat rim Hydronic Baseboard Heater End Cap, Right, 3 In. - 520014.
Check Stock

DIMPLEX NORTH AMERICA LC4015W31 1500W 40' Base Heater, White

  • 1500W, 240V, 40", White, Baseboard Heater, 42% Shorter Than Traditional Baseboard, 40% Faster Heat Flow, Responds Quickly To Changes In Temperature.
Check Stock

DIMPLEX NORTH AMERICA LC6025W31 2500W 60' Base Heater , White

  • 2500W, 240V, 60", White, Baseboard Heater, 42% Shorter Than Traditional Baseboard, 40% Faster Heat Flow, Responds Quickly To Changes In Temperature.
Check Stock

Baseboarders 2' Length Premium Baseboard Heater Cover Panel Only

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric b....
Check Stock

DIMPLEX NORTH AMERICA LC2005W31 500W 20' White Base Heater

  • 500W, 240V, 20", White, Baseboard Heater, 42% Shorter Than Traditional Baseboard, 40% Faster Heat Flow, Responds Quickly To Changes In Temperature.
  • Package dimensions : 6.62 inches (H) x 20.0 inches (L) x 2.38 inches (W).
Check Stock

Baseboarders Premium Galvanized Steel Inside 90 Degree Corner Connector - White (Any Size)

  • Baseboarders Premium Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will ....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Coupler)

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only..
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric ....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Zero Clearance End Cap)

  • Baseboarders Premium Series Zero Clearance caps are symmetrical, there are no left or right sides. Used when the original back plate terminates within ½” of adjacent wall. Designed to snap onto the ends of Premium Baseboarders.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher....
Check Stock

TPI - H2903024SW Electric Baseboard – Stainless Steel Convection Heater, Corrosion Resistant. Premium Heating Equipment

  • Electric Baseboard: stainless steel heating equipment features aluminum fins. Over temperature thermal limit. The junction boxes contain quick connect cable clamps. Comes with 6 IN ground lead wires. Made in U.S.A.
  • Practical Heating Instrument: ideal for winter season and cold places. Offers better heat retention and more consistent room temperature. Even distribution of warmth from floor to ceiling. Premium heating accessory with extra durability. Convection heater.
  • Easy to Install: heating device with DIY installation flexibility. Designed to reduce effects of indoor allergens. Features low surface temperature and auto safety shut off. Corrosion resistant and scratch proof heating element. Ideal electric baseboard.
  • High Quality Heating Accessory: ideal for low traffic spaces like laundry rooms, workshops, garages. Industrial heating device can be used as air circulator, drier or heater. Reliable heating solution.
  • Care Tip: wipe with plain or microfiber cloth each day. Remove lose dust with feather duster. Low maintenance electric board. Do not use harsh chemical based cleaners.
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Closed End Cap - Right)

  • Baseboarders Premium Series Closed End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that bend down into the floor or back into the wall. They do not continue into an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard hea....
Check Stock

Marley HBB1254 Liquid Filled Electric Hydronic Baseboard Heater, Navajo White

  • Hydronic Baseboard Heater: The liquid-immersed heating element delivers consistent heat without temperature swings, and holds heat to keep your room warm even after the heater is shut off.
  • Fanless Operation: Natural convection moves the heat throughout the room, which means evenly distributed heat with no loud fans or clicking noises.
  • Safety Features: This heater is ideal to use safely on flooring, tile or carpet, and its thermal cutoff function prevents overheating.
  • Cleaner Heat: Using convection heat keeps allergens, dust, and bacteria from blowing around the room.
  • Perfect Size: This unit measures 58 inches long, 2938 inches wide, and 875 inches high.
Check Stock