ReviewsBasic Red 6 Gnd

ELING GPS Speedometer Odometer 125MPH Mileage Adjustable Overspeed Alarm for Boat Car Truck Motorcycle 85mm

  • Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge. Put the gauge in the hole and screw down..
  • Connection: Black wire-GND, Red-power(+), White-external button(+), Red/Yellow-Backlight, Blue-Left turn, Green-Right turn, White wire-High Beam.
  • 9-32V Working Voltage, Red and Yellow backlights available, Indication light: LEFT, HIGH BEAM, RIGHT.
  • Securely fasten GPS antenna, preferably outdoors (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. Do not cut cable.
  • OverSpeed Buzzer Alarm, Total Mileage Adjustable, Mileage Range: 0-999999 miles.
Check Stock

Toddler Baby Girl Infant Plain T Shirts Plaid Overall Skirt Set Cotton Outfits

  • ????Fall basic plain long sleeves featuring cute double ruffles, match with black and red plaid overall dress, basic styles. It also easily match with other floral tops or plain overall or leggings..
  • ????Red / black ruffle long sleeve shirt top, Christmas elements / plaids suspender skirt, make your little girl more cute and adorable..
  • ????Suitable for 0-6 Months, 6-12 Months, 12-24 Months, 2T, 3T, 4T, 5T, pull on, button closure. Perfect for a daily wear or many occasions such as Christmas !.
  • ????Package included: 1 * Tee Tops + 1 * Overall Dress. If you consider the clothes cute or comfortable, you can attach pictures or videos..
Check Stock

RJ45 GPIO Pinout Breakout Board for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 3A+ 4B Zero-W

  • 8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
  • Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
  • RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
  • 2x20pin expansion pin header, pin height 10mm/0.39".
  • Packing list: 1x RJ45 breakout board, 4x brass standoffs, 8x M2.5x6 screws, 8x pin jumpers. (the item not include Raspberry Pi, RJ45 cable and plug).
Check Stock

BQTQ 6 Pcs Camisole for Women Undershirts Adjustable Spaghetti Strap Tank Top(Black, White, Gray, Navy, Dark red, Dark Gray, Medium)

  • Size spectrum - BQTQ offer S, M, L, XL, XXL size basic camisole for options, suitable for most of women and girls in different ages, the detail parameter of the basic camisole, please refer to the picture(Warm Notice: please check the size table carefully before place order.).
  • 6 Colors: come with 6 pieces basic camisole in 6 different colors, black, white, gray, dark red, navy, dark gray are available, simple and classic colors basic camisole are perfect for daily wear and well match with different clothes.
  • Comfortable material - the women basic camisole made of comfortable material with 95% viscose and 5% spandex, soft, high elasticity, moisture-wicking and breathable.
  • Well match: BQTQ simple design camisole for women is well match with jeans, leggings, casual look in daily life, workout and any other other occasion.
  • Care instructions - recommend hand wash, wash with similar colors, line dry, Do not dry clean.
Check Stock

DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits

  • The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
  • 4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
  • Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..
Check Stock

PC Addressable RGB LED Strip Lights Aclorol Magnetic LED Light Strip for PC Case DIY Lighting 5V 3-pin ARGB Headers 14in 4PCS 84 LEDs Compatible with ASUS Aura Gigabyte Fusion MSI Mystic Motherboard

  • Widely Compatible:This PC Addressable RGB Digital LED strips are designed for Motherboard with 3-pin 5V header (+5V,DATA,N/A,GND or VDD,DATA,GND),....
  • Great DIY effect:Our two 5V 3pin RGB LED strips are extremely bright and have great effect for decorating your PC case and achieving cool RGB....
  • User-friendly design: The surface of the light strip is sealed and waterproofed with IP65 environmentally friendly silicone, which can avoid the short....
  • This package contains 4X PC addressable digital RGB LED light strips.
  • 2x2 Way Splitter Cable(+5V,DATA,N/A,GND or VDD,DATA,GND) .These two Splitter....
  • The uniformity of light can be improved by using special light diffusion material coating,the bright beautiful colors that illuminate and the....
Check Stock

DORHEA 4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro USB Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0

  • The Nano for motherboard can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality..
  • It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system..
  • More breadboard space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • This board is using the chips ATmega328P and CH340, not FT232, Support ISP download.
Check Stock

WMYCONGCONG 10 PCS Endstop Mechanical Limit Switch with Cable for 3D Printer Mega 2560

  • Mechanical endstop limit switches with 22AWG Cable for 3D Printer Mega 2560 1280..
  • Red line connecting VCC (ramps of +), Connect the black wire GND (ramps of -), Green Line connection SIGNAL (ramps in s).
  • Easy to install, common styles, replacement endstop for RAMPS 1.4, CNC and other 3D printer controllers..
  • Package Content: 10 * Mechanical Endstop Limit Switch with Cable..
Check Stock

Weather Station With Arduino And Android Studio

  • The pluggable DS18B20 temperature probe sensor is easy to plug and can be used in a variety of environments..
  • With pull-up resistor on board, the adapter module can be connected directly to most microcontrollers and it is widely used in temperature monitoring for fish tanks, equipment, machinery, greenhouses..
  • Widely applications: thermostatic controls, industrial systems, consumer products, thermometers, any thermally sensitive system, etc..
  • Working voltage: 3.3 ~ 5VDC, Output leads: yellow (DATA), red (VCC), black (GND).
  • Measuring range: -55 ~ 125 ℃, Lead can only withstand a maximum temperature of 85 degrees.
Check Stock

Killerspin Jet Set 2

  • COMBO PACKAGE: Set of 2 red and black ping pong paddles and 3 white balls is designed for fun with family and friends.
  • SHARPEN YOUR SKILLS: Perfect for learning basic strokes and perfecting ball control, these rackets are designed for recreational ping pong players who want to develop their skills.
  • SUPERIOR CONSTRUCTION: 5-layer wood blade construction and Jet Basic rubbers help improve your game, while flexible PVC tape surrounds the racket edges for protection.
  • IDEAL RATINGS: Features ratings of Control: 5, Spin: 5.
  • PORTABLE SIZE: Rackets measure 6” x 6 1/8” in case you want to bring this paddle and ball set to play on the go.
Check Stock

Gikfun DS18B20 Temperature Sensor Waterproof Digital Thermal Probe Sensor for Arduino (Pack of 5pcs) EK1083

  • Output lead:red (VCC), yellow(DATA) , black(GND).
  • No other components, unique single bus interface.
  • Widely applications: thermostatic controls, industrial systems, consumer products, thermometers, any thermally sensitive system, etc..
Check Stock