ReviewsBattery Nailer

Cordless Brad Nailer (2.0Ah Battery and Charger Included) and Cordless Jobsite Blower Vacuum with Variable Speed, 20V MAX 2.0Ah Battery Included

  • ♣ Share two 2.0Ah battery and 2 fast chargers..
  • ♣What You Will Get ----- A cordless 2 in1 brad nailer/staple gun, a cordless blower vacuum, two 2.0Ah Li-ion battery, two 1.65A fast charger..
  • ♣Cordless Brad Nailer ----- Powered by NEU MASTER 20v MAX rechargeable Lithium-Ion battery which has passed 1000 charging cycle test, the electric nail gun/staple gun can deliver up to 1100 full power shot per full charge..
  • ♣Cordless Blower Vacuum ----- Featured with LOCK-ON switch supports continuous blowing, relieves hand fatigue without holding the trigger..
  • ♣Friendly Customer Service -- If quality problems happen in guaranteed period, NEU MASTER Customer Service Team will respond within 24 hours..
Check Stock

Metabo HPT Cordless Pin Nailer Kit (NP18DSAL) + Metabo HPT 18V MultiVolt™ Cordless Finish Nailer Kit | NT1865DMS

  • INCLUDES: NP18DSAL cordless pin nailer, Compact 3.0Ah Lithium Ion Battery, Fast Charger, Contractor Bag, Safety Glasses, 3mm Hex. Bar Wrench.
  • INCLUDES: NT1865DMS Cordless Finish Nailer, (1) Compact 3.0Ah Lithium Ion Battery BSL1830C, Charger, Contractor Bag, Safety Glasses.
  • AWARDS: Pro-Preferred for Pneumatics 2014 - 2020 per Builder and Developer Magazine.
  • CORDLESS FREEDOM: Pneumatic power with 18 volt cordless freedom.
  • NAIL GRADE: Use genuine Metabo HPT pin nails for optimal performance. See note below.
  • APPLICATIONS: For molding install, cabinetry, and finish work.
  • FASTENERS: Accepts 23 gauge nail lengths 5/8.
Check Stock

Metabo HPT Cordless Finish Nailer Kit with Metabo HPT Finish Nails, 2\ x 15 Gauge

  • INCLUDES: NT1865DMS Cordless Finish Nailer, (1) Compact 3.0Ah Lithium Ion Battery BSL1830C, Charger, Contractor Bag, Safety Glasses.
  • APPLICATIONS: For molding install, cabinetry, and finish work.
  • Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
  • 2-1/2" X 16 gauge Electro galvanized finish nails.
Check Stock

Metabo HPT Cordless Finish Nailer Kit with Metabo HPT Finish Nails, 2\ x 15 Gauge

  • CORDLESS NAILER: 15 Gauge Cordless Nailer.
  • INCLUDES: NT1865DMAS, (1) Compact 3.0Ah Lithium Ion Battery, Charger, Contractor Bag, Safety Glasses.
  • FASTENERS: Holds 100 15-gauge angled fasteners from 1-1/4" up to 2-1/2" In length.
  • Item Package Dimension: 6.199999993676" L x 2.599999997348" W x 1.699999998266" H.
Check Stock

Cordless Brad Nailer NEU MASTER, 18 Gauge 2 in 1 Nail Gun/Staple Gun with 2.0Ah Li-ion Battery, 1000pcs Nails and 500pcs Staples Included, for Home Improvement, Woodworking.

  • [ CORDLESS & 2 IN1 BRAD NAILER ] : NEU MASTER 20V Max battery powered brad nailer/stapler eliminates need for compressors, hoses or costly gas cartridges. It is a great ideal for different nailing and stapling application on various materials..
  • [ CYLINDER DRIVING TECHNOLOGY ] :The cordless nails gun has cylinder driving system that provide consistent firing power and can penetrate 2" wood at maximum setting. Power 2 in 1 nailer gun is compatible with 18 gauge brad nails 3/4" to 2.
Check Stock

BOSTITCH 20V MAX* Cordless Framing Nailer 30 Degree Paper Tape, Tool Only (BCF30PTB)

  • Cordless framing nailer features tool-free selector switch for sequential and contact-actuation modes.
  • Brushless motor and engine design of the framing nailer gun includes two speeds for optimized performance and enough power to drive 3-1/2-inch fasteners.
  • Stall release lever to reset driver blade in case of jam.
  • Compatible with BOSTITCH 20V MAX* batteries.
Check Stock

Piston Bumper Stop 901901 Compatible with Porter Cable FC350 FR350

  • Compatible with FC350 Clipped Head Framing Nailer Kit,FC350 Type 1 Framing Nailer Clip,FC350 Type 2 Framing Nailer Clip,FC350 Type 3 Framing Nailer Clip.
  • Compatible with FR350 Round Head Framing Nailer Kit, FR350 Type 1 Framing Nailer Round, FR350 Type 2 Framing Nailer Round,FR350 Type 3 Framing Nailer Round.
  • This Part Acts as a Cushion When The Piston/Driver Retracts Back Into The Cylinder After Being Fired.This Piston Bumper is Located Cylinder Cap of Nail Guns..
  • Warning:It does not fit FR350 MAG Type 1 nailers!!!.
Check Stock

901901 886151 Piston Bumper Fits For Porter Cable FR350 FC350

  • This part is used in the following models: Porter-Cable FC350 Clipped Head Framing Nailer Kit, Needs 0 Porter-Cable FC350_TYPE_1 FRAMING NAILER CLIP, Needs 1 Porter-Cable FC350_TYPE_2 FRAMING NAILER CLIP, Needs 1 Porter-Cable FC350_TYPE_3 FRAMING NAILER CLIP, Needs 1 Porter-Cable FR350 Round Head Framing Nailer Kit, Needs 1 Porter-Cable FR350_TYPE_1 FRAMING NAILER ROUND, Needs 1 Porter-Cable FR350_TYPE_2 FRAMING NAILER ROUND, Needs 1 Porter-Cable FR350_TYPE_3 FRAMING NAILER ROUND, Needs 1.
Check Stock

Eagleggo Parts EP 876-174 Aftermarket Piston O-Ring for Hitachi NV45AB2, N5008AC, NT65A2, NT50A Nailers, Hitachi Replaces Part 876-174, 876174 Piston O-Rings - 10pcs/Pack

  • COMPATIBLE WITH: Fits Hitachi 876-174, 876174 Piston O-Rings..
  • This 876-174 o-ring is compatible with Hitachi N5010A, N5008AC / AC2 / ACP, NV45AB2, NT65A2, NT50A Nailers.
  • COMPATIBLE WITH: Fits Hitachi NT65A3 16-Gauge Finish Nailer NV45AB2 Side Load Coil Roofing Nailer NV45AB2(S) Bottom Load Coil Roofing Nailer NV45AE 1-3/4" Side Load Coil Roofing Nailer NV50A1 Light-Duty Coil Utility Nailer NV50AA Light-Duty Coil Utility Nailer N5008ACP 7/16" 1" - 2" x 16 Gauge Standard Crown Stapler N5010A 1/2" Standard Crown Stapler N5021A 15/16" Wide Crown Stapler N5024A 1" Wide Crown Stapler.
  • COMPATIBLE WITH: Fits Hitachi NV50AP2 Full Round Head, Coil, Wire Collation Pasti-Tacker Plus N3824A .5"-1.5" Wide Crown Stapler 16Ga N5008A1 Stapler N5008AC 2" 16Ga 1"-2"Standard Crown Construction Stapler NH451 "T" Nailer NT50A 18Ga Brad Nailer NT65A 16 Gage Brad Nailer NT65A2 2-1/2" 16Ga Finish Nailer NV45AA Heavy Duty Coil Nailer NV45AB 1-3/4" Heavy Duty, Roofing Coil Nailer VH501 Nailer N5008AC2 Stapler N5024A2 Stapler.
Check Stock

Cordless Brad Nailer (2.0Ah Battery and Charger Included) and 1600-Count NEU MASTER Heavy Duty Type600 Staples and 18GA Brad Nails

  • ♣Get Get more suitable staples & nails for this cordless brad nailer NTC0023.
  • ♣What You Will Get ----- A cordless 2 in1 brad nailer/staple gun with a 2.0Ah Li-ion battery, a 1.65A fast charger & 1600-Count NEU MASTER Heavy Duty Type600 Staples and 18GA Brad Nails..
  • ♣Battery Brad gun/Staple gun ----- It drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4'', which makes its ideal for fastening lightweight decoration trim, installing sheets of insulation, home repair while not recommended for quarter round installation or heavy duty construction projects..
  • ♣1600-count heavy duty fasteners -- 5 different sizes. Includes: 3/4.
Check Stock

AIR LOCKER CN15AL 14 Gauge Concrete T-Nails for Concrete Nailers 1-1/2 Inch Smooth Shank (2 Packs of 1,000)

  • HASMX 877-323 885-915 Framing Coil Nailer Piston Driver for Hitachi NR83A NR83A2(S), Replaces Part Number 885-915-02 877323 for Hitachi HiKOKI NR 83A3 NR 83A3(S) Plastic Strip Framing Nailer Guns SP 877-323, SP 885-915 Power Tools Piston Assembly Accessories.
  • This is a aftermarket Hitachi Framing Nailer Piston Driver. It is a generic replacement driver with o-ring for the Hitachi NR83A, NR83A2, NR83A2(S) Air Framing Nailer Guns..
  • Compatible With: Hitachi NR83A2(S) Framing Nailer, Full Head, Plastic Strip Collation (without Depth Adjustment) , NR83A 3-1/4" Full Head Nailer , NR83A3S Strip Nailer, NR83A3 Strip Nailer , NR83A2 Strip Nailer.
  • Heat treated tool steel 6150 - Rockwell hardness 50-52, Aerospace grade #2024 Aluminum piston, Mechanically locked piston driver interface.
  • Package Includes : 1 x 877-323 885-915 Piston Driver Assembly, 5 x Extra O-Rings.
Check Stock