ReviewsBattery Status

POTEK Car Jump Starter with 150 PSI Tire Inflator/Air Compressor,1000 Peak/500 Instant Amps with USB Port to Charge iPhone ,IPad, Kindle

  • [HIGH PERFORMANCE] POTEK 1000 Peak/500 Instant Amps Car Jump Starter, an emergency life saver when you are out,perfect for long driving, camping, biking..
  • [AIR STATION TIRE INFLATOR] The 150PSI air compressor takes 6~8 minutes to inflate a regular car tire to 30 PSI. Suitable for bicycle,car, balls and Other Inflatables.
  • [USEFUL FOR CHARGING DEVICES]With the USB port,you can charge your iphone,kindle or pad,what’s more,you can charge any 12V appliance like inverter, vaccum or mini fridge with the 12 volt power outlet sockets..
  • [TWO WAYS FOR CHARGING]Equipped with 12 Volt lead acid Battery,not only can charge with AC adapter at home but also can charge it with DC adapter in your car..
  • [LED INDICATOR] Know your battery status from the indicator,The red charging status LED light will illuminate to indicate the unit is charging. The battery status indicator will illuminate red-yellow-green- green respectively when the unit is fully charged.Charging current will automatically go to floating charge(maintaining status)..
Check Stock

ANCEL AD410 PRO with Storage Case 2 in 1 Mechanic OBD2 Scanner Battery Tester Code Reader Scan Tool

  • 【MORE ACCURATE BATTERY TEST】Allows you to check the car battery based on the location of the battery inside the vehicle or outside the vehicle, capacity for analyzing battery health status and quickly provide more accurate test results, displays voltage value, standard CCA, measured CCA, SOH (%), SOC (%), internal resistance and more..
  • 【PERFORM MULTIPLE BATTERY SYSTEMS TESTS】Analyzes the condition of the starter cranking and alternator charging. Cranking Test to test and analyze the starter motor (cranking time, voltage, and status) and Charging Test to test and analyze the charging system (load voltage, unloaded voltage, charging system status)..
  • 【POWERFUL APPLICATION】Works on all 6V and 12V lead-acid batteries from 100 to 2000 CCA, including regular flood batteries, AGM flat batteries, AGM spiral batteries, GEL and EFB batteries for lawn mowers, motorcycles, cars, light trucks, boats, etc. Supports most standards for vehicle batteries, such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE..
  • 【One-Click I/M Readiness】+【A Must Have for Quick Smog Check】This ANCEL scanner AD410 PRO enables you to do a quick smog check to confirm if your car could pass the emission test. AD410 PRO code scanner---Best item to have before the annual inspectio....
Check Stock

Blackmagic Design Pocket Cinema Camera Battery Pro Grip

  • Capacity: The Blackmagic Pocket Camera Battery Pro Grip adds two extra NP-F570 batteries to the 6K Pro for over 3 hours of shooting on a single charge. That�s a massive battery life, in a compact design that integrates seamlessly with the camera.
  • Design: Featuring a unique carbon fiber design, non-slip hand grips, and a slide out tray, the battery grip makes long shoots easier because it gives you more to hold onto.
  • Status: You can view the status of the grip�s batteries on the touchscreen display.
  • Charging: You can charge the batteries via the camera�s 12V DC power connection in between takes.
  • Replacement: The Blackmagic Pocket Battery Grip lets you replace the 4K and 6K model�s standard LP-E6 battery with two L-series batteries.
Check Stock

Car Battery Tester 12v Car Battery Load Tester on Cranking Charging System, TOPDON AB101 100-2000 CCA Alternator Analyzer Battery Health on Cars/SUVs/Light Trucks with Flooded AGM Gel Types

  • 12V Lead-Acid Batteries 100-2000CCA: Based on CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB standards, TOPDON AB101 car battery tester is an excellent way to easily and accurately test the health status of automotive 12V lead-acid batteries (100-2000CCA), including Regular Flooded, Gel batteries, AGM Flat Plate, AGM Spiral, etc..
  • Car Battery Health Analyzer: Good or bad battery? As a quick and precise battery analyzer, AB101 tells you when to replace and recharge the battery by checking the battery State of Health (SOH)), State of Charge (SOC), Voltage, Rating, and Current. With on-screen prompts and reliable testing results, it gives mechanics or DIYers a great user experience..
  • Cranking & Charging System Tests: Through the cranking system test, this 12V battery tester displays the actual cranking time and cranking voltage to check the cranking conditions of various 12V car batteries. It can also check ripple status, load voltage, and charging system status to find out the common faults of the charging system..
  • Ease to Use & Safe: This car battery tester works on batteries both in and out of the vehicle and supports multiple languages: English, Russian, Spanish, French, German, and Italian. With reverse polarity protection function, the batter....
Check Stock

Yuasa YUA1AMPCH 12V 1-Amp Battery Charger 50 State Compliant

  • Easy-to-use — just plug in and attach to battery. 3 color LED displays your charge status at a glance. Automatically switches to maintenance mode....
  • Easy-to-use — just plug in and attach to battery.
  • 3 color LED displays your charge status at a glance.
  • Automatically switches to maintenance mode after battery reaches peak voltage.
  • 3 stage charge cycle designed to prevent overcharging.
Check Stock

STANLEY BC15BS Fully Automatic 15 Amp 12V Bench Battery Charger/Maintainer with 40A Engine Start Alternator Check Cable Clamps

  • 15 amp bench battery charger maintains and charges any AGM, GEL, or WET automotive or marine 12V battery.
  • Fully automatic high frequency charging delivers 3 stage charging, automatically switching from fast charge, to top-off, to trickle charge.
  • Battery reconditioning feature helps extend battery life.
  • 40 amp engine start helps start your vehicle in about 90 seconds.
  • Equipped with reverse polarity protection.
  • LCD screen displays charging status and battery status with easy to understand icons.
  • Features a patented alternator check which indicates if the alternator is maintaining battery level.
  • ETL Certified for performance and safety.
Check Stock

STANLEY BC50BS Fully Automatic 15 Amp 12V Bench Battery Charger/Maintainer with 50A Engine Start, Alternator Check, Cable Clamps

  • 15 amp bench battery charger maintains and charges any AGM, GEL, or WET automotive or marine 12V battery.
  • Fully automatic high frequency charging delivers 3 stage charging, automatically switching from fast charge, to top-off, to trickle charge.
  • Battery reconditioning feature helps extend battery life.
  • 50 amp engine start helps start your vehicle in about 90 seconds.
  • Equipped with reverse polarity protection.
  • LCD screen displays charging status and battery status with easy to understand icons.
  • Features a patented alternator check which indicates if the alternator is maintaining battery level.
  • ETL Certified for performance and safety.
Check Stock

WindyNation Waterproof 10A 12V Solar Charge Controller w/LED Charging and Load Indicators

  • Compact size: Easy to mount directly on the rear of the solar panel using pre-attached solar connectors..
  • IP68 Rated (waterproof) Suitable for Outdoor Use. Intelligent 4-stage PWM charging..
  • Three LED's lights provide solar charging status, battery level, and load status..
  • Prewired. Includes cables for attaching solar panel, battery, and load (optional).
  • Maintains batteries and extends battery life. Automatically senses 12 or 24 volt batteries..
Check Stock

BLACK+DECKER BC15BD Fully Automatic 15 Amp 12V Bench Battery Charger/Maintainer with 40A Engine Start Alternator Check Cable Clamps

  • 15 amp bench battery charger maintains and charges any AGM, GEL, or WET automotive or marine 12V battery .AC Low-voltage compensation ensures maximum....
  • Fully automatic high frequency charging delivers 3 stage charging, automatically switching from fast charge, to top-off, to trickle charge.
  • Battery reconditioning feature helps extend battery life.
  • 40 amp engine start helps start your vehicle in about 90 seconds.
  • Equipped with reverse polarity protection.
  • LCD screen displays charging status and battery status with easy to understand icons.
  • Features a patented alternator check which indicates if the alternator is maintaining battery level.
  • ETL Certified for performance and safety.
Check Stock

EBL AA AAA Battery Charger with LCD Display - Individual Battery Chargers for AA AAA Ni-MH/Ni-CD Rechargeable Batteries

  • [Individual Battery Charger] - The intelligent LCD battery charger can charge 1/2/3/4 pieces AA AAA Ni-MH Ni-CD batteries at the same time and you can just take 4 hours to fully charge 4 AA 2000mAh batteries.
  • [Unique Angle Design] - The FY-408 battery charger is designed with a 35° oblique viewing angle, so that you do not need to approach the charger and bend down to see the charging status of the battery.
  • [Rapid Battery Charger] - The LCD battery charger charges current up to 1000mA when you charge 1 rechargeable battery, and take 4 hours to fully charge 4 counts 2000mA AA batteries.
  • [Intelligent LCD Screen ] - The battery charger displays the charge status and charged capacity of each rechargeable battery. The battery icon will flash when detected defective battery or non-rechargeable battery.
  • [Safety Guarantee] - Advanced MCU control and -∆V function, over-heat and over-current protection, short-circuit protection, non-rechargeable, and defective battery detection.
Check Stock

ANCEL AD410 Enhanced OBD II Vehicle Code Reader with ANCEL BA201 Car 12V 100-2000 CCA Battery Load Tester

  • ...10 code scanner can be used to initiate a leak test on a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission..
  • Aims to analyze battery health status to calculate the actual cold cranking capability and the aging extent. Based on the majority of battery standards, such as CCA, BCI, CA, MCA, JIS, DIN, SAE etc., gets the accurate test result within 1 second..
  • Easy to check the cranking and charging system condition. Cranking test displays cranking time, voltage and status, which helps you test and analyze the starting motor to check it works properly or not. Charging test displays load voltage, unloaded voltage, ripple status, charging system status to avoid damaging the battery and shortening its life greatly due to overcharging or incomplete charging..
Check Stock