ReviewsBeacon Temperature Sensor

AITRIP 5Pack 2pcs DS18B20 Temperature Sensor Module Kit with Waterproof Stainless Steel Probe for Raspberry Pi

  • Temperature sensor supply voltage: 3.0V ~ 5.5V.
  • The temperature sensor supports the "one-wire bus" interface (1-Wrie), the measurement temperature range is -55 °C ~ +125 °C, in the range of -10 °C ~ +85 °C, the accuracy is plus or minus 0.5 °C.
  • Output : red (VCC), yellow (DATA), black (GND).
  • DS18B20 temperature sensor: the size of stainless steel housing is approx. 6 x 50 mm/ 0.2 x 2 inch, and the digital temperature thermal cable has a total length of approx 1 m/ 39.4 inch, which is long enough to meet your needs..
  • AITRIP DS18B20 temperature sensor is compatible with Raspberry Pi, and is widely applied in temperature monitoring of cable trench, boiler, zer, agricultural greenhouse, clean room, etc..
Check Stock

Inkbird Combination Temperature and Humidity Controller ITC-608T Digital Pre-wired Outlet Humidistat Thermostat, 120V 15A 1800W, 12 Period Time Dual Stage w/Sensor

  • 1.√US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
  • 2.√Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock

Inkbird Temperature ＆ Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat Humidistat with 12 Period Time Stage 120V 15A 1800W Cooling/Heating and Humidifier/Dehumidifier

  • Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL list....
Check Stock

ThermoPro TP60S Digital Hygrometer Indoor Outdoor Thermometer Wireless Temperature and Humidity Gauge Monitor Room Thermometer with 200ft/60m Range Humidity Meter

  • Informational: Weather stations wireless indoor outdoor record all time/24 hours max and min temperature and humidity readings.
  • Wireless thermometer indoor outdoor with temperature trend arrows indicates whether it's getting warmer or colder near the remote temperature monitor.
  • Smart Design: Temperature and humidity monitor can display the readings from up to 3 temperature sensors to monitor different locations.
  • Wide Temp & Humid Range: Inside outside thermometer hydrometer measures indoor outdoor temperature and humidity percentages simultaneously.
  • Indoor/outdoor temperature range: -4°F to 158°F (-20°C to 70°C).
  • Hands Free Monitoring: Wireless thermometer outdoor with strong signal penetration humidity sensors to get the temperature and humidity records from 200ft/60m remote range away.
  • Widely Application: Indoor/outdoor hygrometer wireless ensures proper temperature and humidity control, which has important health benefits, thermometer digital can be placed in baby room, nursery, cellar, basement, warehouse and greenhouse.
  • Additional sensors: There are two versions: TP60 with 433MHz sensor and TP60 with 915MHz sensor. B....
Check Stock

DORHEA 2Pcs BME280 5V Temperature Humidity Atmospheric Barometric Pressure Sensor Module GY-BME280-5V IIC I2C Breakout Board

  • The BME280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity..
  • BME280 5V uses both I2C and SPI (supports 3-, 4-wire SPI) interface. Interface: I2C (up to 3.4MHz).
  • Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI. for simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI..
  • The BME280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings..
  • The BME280 sensor is precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy..
Check Stock

Amprobe - 3311871 TH-1 Compact Probe Style Relative Humidity Meter

  • Relative humidity (RH), temperature, wet bulb, and dew point meter is used for HVAC, indoor air quality, and environmental applications.
  • Dual-scale thermometer measures wet- and dry-bulb temperature and dew point in F and C.
  • Capacitive humidity sensor ranges from 0 to 100 percent relative humidity (RH).
  • Data hold for recording data, and minimum and maximum temperature readings.
  • Sensor: Electronic Capacitance Polymer Film Sensor.
  • Range Temperature: -20 to 50°C (-4 to 122°F).
  • Accuracy Relative Humidity: ±3%RH from 10 to 95%RH, +5%RH (0 to 10, 95 to 100%RH) @ 25°C (77°F) non-condensing.
Check Stock

GE WB20K10027 Range Oven Temperature Sensor

  • The GE WB20K10027 is a genuine OEM Oven Temperature Sensor for Ranges.
  • This GE Oven Temperature Sensor measures the temperature inside the oven.
  • The GE WB20K10027 can be applied to some Ranges of the following brands: Hotpoint.
  • The WB20K10027 is an original GE Oven Temperature Sensor that is manufactured to exact specifications with high quality materials.
  • Have confidence when making repairs or servicing your appliances with genuine GE parts.
Check Stock

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

  • US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock

Joyzan Temperature Floor Sensor Radiant Under Floor Heating Thermostat Sensor Probe Cable for Most Heating Installations Electric Underfloor Heating Universal Accessory

  • [Simple To Install]: Neutral polarity floor sensor of the floor temperature thermostat is quick and easy to connect to your thermostat. Tough cable....
  • [Universal]: Thermostat sensor probe is compatible with all types of radiant heating systems, and compatible with most types of thermostat....
  • [Accurate Temperature Sensor]: The universal floor sensor accurately measures the floor temperature and communicates with the thermostat, to increase....
  • [Important Floor Heating System Accessory]: The accurate thermostat sensor probe could be optimal placement in the heated room for accurate....
  • [Appropriate Cable Length]: Flexible sensor cable is easy to install and can be cut short or lengthened as required. The 9.84ft (3meter) length is....
Check Stock

Temperature Sensor, PT100 Type Digital Temp Transducer Thermal Probe Sensor Waterproof with Cable for Arduino Raspberry Pi(50MM)

  • ☀ 【Wide Temperature】 This temperature sensor is PT100 type stainless steel waterproof thermocouple, and it can withstand wide temperature range of -200 ~ 450 ℃..
  • 【Characteristics】 It has the feature of high precision, high sensitivity, high temperature resistance, quick response, good shockproof effect..
  • ☀ 【Parameters】 Lead length: 1.5m / 59.1in.
  • Protecting tube diameter: standard 7 mm..
  • ☀ 【Excellent Sealing】 The temperature sensor with great processing treatment, argon arc welding seal, excellent sealing effect..
  • ☀ 【Durability】 The temperature thermocouple sensor probe adopted of high quality three-core high temperature shield wire, secure and durable..
Check Stock

GGStudy Automatic Sensor Touchless Bathroom Sink Faucet with Hole Cover Plate Vanity Faucets Hands Free Waterfall Bathroom Faucet Chrome Water Tap with Control Box and Temperature Mixer

  • High quality and durable touchless bathroom sink faucet solid brass construction for reliability and long lasting performance.
  • Temperature adjustable:You can adjust water temperature with the temperature mixer according to your preference. Hot and cold hose, temperature mixer are included..
  • Automatic sensor bathroom faucet: motion sensor bathroom faucet, touch-free,no need to touch the faucet when washing your hands..
  • Sensor tap: Sensor powered by 4pcs AA Batteries (battery not included). The battery can last approximately 7000 times or 2 years for daily home use.
  • Easy installation motion sensor bathroom faucet with Instruction (Diagram) Included.(No drain included).
Check Stock