ReviewsBearing thrust Washers

A&I - Bearing Set, Connecting Rod (.020\). Part NO: A-72080084

  • OEM replacement connecting rod, ideal for the motorbike.
  • High quality forged steel material, safe and durable.
  • Includes connecting rod, crank pin, crank pin bearing,thrust washers.
  • Quality Assurance! If you are not satisfied with our products, we accept all of the return, replacement or refund requests.
Check Stock

Vital Parts BK371A / HV074 Transfer Case Rebuild Bearing and Chain Kit Fits GM Trucks NP 261XHD & NP 263XHD

  • Our transmission rebuild & chain kits are of the highest quality and meet all standards set by professional installers.
  • (HV074) - Chain specifications: 1.50" Wide / 42 links / Round Pin.
  • Please verify your chain width prior to making your purchase. GM used 3 different chains in the NP261 & NP263 transfer cases..
  • Kit Includes: (3) Main roller bearings (1) Caged needle bearing (1) Input to Output caged needle bearing Small Parts Kit, Gaskets Seals, O-rings Planet Thrust Washers.
Check Stock

ABN Wheel Bearing Puller Kit Hub Removal Tool Wheel Bearing Tool - Independent Suspension Roll Ball Bearing FWD RWD AWD

  • [No More Hammer or Shop Press]: The ABN Master Wheel Bearing Removal Tool and Wheel Hub Puller Tool Kit allows you to remove and install wheel hub and....
  • [Fits Your Vehicle]: Universal for front, rear, and all-wheel drive vehicles with independent suspension and pressed roller-ball bearings.
  • [Use on Seized-Up Assemblies]: Self-centering mechanism and thrust bearing design.
  • Use the round plate that corresponds to the diameter of your....
  • [Perfect Sizes]: Universal set includes 21 pieces that have A through U permanently printed labels.
  • Pusher washer disk driver sizes from 2.1 inches....
  • [Contents]: Wheel hub and bearing puller set and installation kit includes a remover tool, adapter shoes, pusher washers, receiver sleeves, nut-bolt,....
Check Stock

Crower ML93006B5-8 Steel Billet Connecting Rod Set - Small Block Chevy 6.000\ - Set of 8

  • OEM replacement connecting rod,ideal for the motorbike.
  • High quality forged steel material,efficient and durable.
  • Package including connecting rod,crank pin,crank pin bearing,thrust washers.
  • Quality Assurance!If you are not satisfied with our products,we accept all of the return,replacement or refund requests.
Check Stock

uxcell AXK1528 Thrust Needle Roller Bearings with Washers 15mm Bore 28mm OD 2mm Width

  • [MODLE] - Bearing Model: AXK1528 (I.D.=15mm, O.D.=28mm, Thickness=2mm).
  • [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
  • [CAPABILITY] - 35.5kN Static Load Capacity, 11.2kN Dynamic Load Capacity, 11000RPM Maximum Rotational Speed.
Check Stock

10pcs 6700ZZ Thin Section Bearing Thin Wall Mini Ball Bearings Double Shielded 10x15X4mm

  • This A-Type, angular contact ball bearing is best suited to applications with high axial loads. This bearing also works well in radial or combined radial-thrust applications but should never be used alone to support moment loads or reversing axial loading..
  • Thoroughly coated in MIL-PRF-3150 or MIL-PRF-6085 oil and drained of excess and vacuum sealed in a plastic bag for shipping..
  • Manufactured to ABEC 1F precision tolerances related to the bearing bore, outer diameter, radial runout, axial runout and radial play..
  • Static Thrust Rating 970 pounds, Dynamic Thrust Rating 960 pounds.
  • This RBC thin section ball bearing can be advantageous in a design where space limitations, combined loading, or weight restrictions are proving to be challenging to overcome with a traditional ball bearing solution..
Check Stock

uxcell AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width 10pcs

  • [MODLE] - Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm).
  • [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
  • [CAPABILITY] - 45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed.
Check Stock

uxcell AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width 2pcs

  • [MODLE] - Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm).
  • [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
  • [CAPABILITY] - 45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed.
Check Stock

uxcell AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width 5pcs

  • [MODLE] - Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm).
  • [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
  • [CAPABILITY] - 45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed.
Check Stock

uxcell AXK0819 Thrust Needle Roller Bearings with Washers 8mm Bore 19mm OD 2mm Width 10pcs

  • [MODLE] - Bearing Model: AXK0819 (I.D.=8mm, O.D.=19mm, Thickness=2mm).
  • [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
  • [CAPABILITY] - 17.2kN Static Load Capacity, 7.25kN Dynamic Load Capacity, 15500RPM Maximum Rotational Speed.
Check Stock

uxcell AXK1024 Thrust Needle Roller Bearings with Washers 10mm Bore 24mm OD 2mm Width 10pcs

  • [MODLE] - Bearing Model: AXK1024 (I.D.=10mm, O.D.=24mm, Thickness=2mm).
  • [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
  • [CAPABILITY] - 24.5kN Static Load Capacity, 9.15kN Dynamic Load Capacity, 14000RPM Maximum Rotational Speed.
Check Stock