ReviewsBearing Steel Rolled Bar

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
Repeat action until the bearing or bushing has been removed.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....

Check Stock

OUUO Heavy Duty Wall Mounted Pull Up Bar for Doorway - Fully Welded Construction Strength Training Pull-Up Bars 1.25-Inch Durable Steel Tubing - Over Door Pull Up Bar with 4.8” Wall to Bar Spacing

MAX LOAD-BEARING 400LBS - The OUUO wall mount pull up bar is made of heavy gauge steel for more durability. This pullup bar for doorway has a maximum load-bearing capacity of 400lbs..
4.8” WALL CLEARANCE - The exercise bar’s mounting holes are set at a 32" spacing for 2 standard wall studs. It fits doorways from 24-30” wide. Wall clearance is 4.8". This pull-up bar is suitable for exercise space under the wall - doorways, beams, etc..
DURABLE BLACK POWDER COATING - Our doorway pull up bar is coated with a durable black powder to prevent rust and corrosion. The fitness bar’s surface has a non-slip matte textured effect..
1.25” HEAVY-DUTY STEEL TUBING - Upon installation, the chin up bar will not impact opening or closing of the door. Our doorframe pullup bar is constructed with 1.25” heavy-duty steel tubing for max stability and durability..
INSTRUCTIONS & MOUNTING HARDWARE INCLUDED - This door exercise equipment comes with full mounting instructions and all mounting hardware so that you can start exercising as soon as it’s delivered to your home..

Check Stock

16 Inch Heavy Duty Hairpin Furniture Legs, Metal Home DIY Projects Coffee Table, Desk, etc with Rubber Floor Protectors Black

...mid-century modern statement piece, live-edge table or turn a stump, a piece of plywood or pallet into a piece of furniture..
【Incredible Design】:Designed specifically for DIYers, these industrial strength hairpin table legs will add both stability and mid-century modern style to all furniture projects! Two cold Rolled sturdy steel rods design makes it has a sturdy construction and excellent stability. Equipped with six screw holes for increasing structural stability, make an iron leg be closed more to desktop. The base is made from a solid chunk of 1" diameter metal turned to a perfect finish..
【Industrial Standards Materials 】: Made of high-quality cold Rolled sturdy steel and durable for long service time. Electrostatic powder coated with matt black, anti-rust, and colorfast, has a long lifespan and stable performance. The two solid support rods are 3/8" diameter. The adjustable nylon leveling foot will protect your hardwood floors..
【Modern Technology】: We use cold rolled steel instead of hot rolled steel for a higher-quality finish and stronger legs..
【Heavy Duty Structure】: These are high quality industrial hair pin legs made of 1/2” cold rolled steel. double welded sturdy enough. The heavy-duty legs come with a satin black po....

Check Stock

Olympic Barbell 87 Inch Threaded Chrome Barbell Bar for Weightlifting, Hip Thrusts, Squats and Lunges（Black,straight)

SUPERIOR SPECS-190,000 PSI tensile strength steel.This bar weighs and is 87 inches (7-foot) long,a solid 44 lbs,28 mm diameter.Our olympic lifting barbell can hold 700lbs weight capacity, has the characteristics of high load-bearing capacity and flexibility,coated with a cutting-edge vibrant,yet corrosion-resistant powder coating that will last you a lifetime..
HEAVY-DUTY CHROME STEEL CONSTRUCTION:Our Steel Bar has hardened chrome shaft for durability and excellent bar feel.The Olympic Bar has a smooth,and well rounded feel,and gives the sensation of lifting bare steel.The Holleyweb Olympic Bar is designed to withstand your heavy training sessions and help you become strong as heck..
PRO-GRIP KNURLING:The 28mm grip shaft with a 1.2mm medium-level knurling.A Peaked Diamond Knurl pattern provides an excellent gripping surface without the sharpness of other grips,and have a moderate whip,increases friction and improves the grip experience.The knurling design can also effectively reduce the tension in the wrist and forearm,increase the safety of sports and ensure comfort..
NEEDLE BEARING & SLEEVES:The sleeves of barbells are often constructed with either bushings or bearings. Our Olympic bar sleeves are friction welded, it's stronger than normal welding sle....

Check Stock

HEART ART Black Shelf Bracket 6 inch, J Metal Heavy Duty Shelf Support Brackets 4 Pack，6.3\L×4.8\H×1.2\W

Material: Cold-rolled steel forgings, not easy to deform and rust, with stainless steel screws, better bearing capacity..
Size: The exact outside dimensions are: 6.3''Lx4.8''Hx1.2''W, suitable for a variety of 6" width shelves..
Feature: Embedded screw holes are reserved on the bracket, after the installation is completed, the surface is flat without protrusions, which is more beautiful..
Load Bearing: The load-bearing capacity of the bracket is also different depending on the installation of the wall. On concrete or brick walls, the maximum load is 80LBS. On the wooden wall, the maximum load is 45LBS..
Design: Easy-to-install design using basic DIY tools Can place decorative items on the shelf to decorate your home.

Check Stock

6 Pcs Hand Tool Toggle Latch Clamp, 201B Quick Release Horizontal Toggle Clamp with PVC Non-Slip Hadle, Stainless Steel Toggle Latch for Woodworking, Welding, Mechanical Operations,220 Lbs

[Corrosion-Resistant High-Quality Materials] Our hand tool toggle clamp is made of stainless steel. The cold-rolled steel surface is electroplated and anti-rust treated, which has high hardness and corrosion resistance..
[Four-Link Dead Point Structure] The toggle clamp adopts a quick clamping and quick opening structure designed by the four-link dead-point principle, which is flexible and smooth without slipping. Maximum clamping force is 90kgf..
[Robust and Stable Design] The clamping base is designed with reinforced ribs, which is firmer in use and the clamping is more stable. The adjusting shaft is made of stainless steel with high bearing capacity. 85° bar opening angle, 60° handle opening angle..
[Comfortable PVC Rubber Sleeve Handle] Our toggle latch use high temperature die-casting PVC handle rubber sleeve, which is non-slip, abrasion resistant and does not hurt your hands, make it easier, comfortable and safer to use manually..
[Wide Application] The hand tools toggle have the advantages of accurate positioning and fast loading and unloading. They are ideal choices for vehicle manufacturing, electronics, furniture and other industries..

Check Stock

Olympic Barbell Curl Bar EZ Bar Strength Training Bar Threaded Chrome Barbell Bar for Weightlifting Hip Thrusts Squats and Lunges

SUPERIOR SPECS-190,000 PSI tensile strength steel.The length of the curl bar is 47 inches (4-foot), a solid 22 lbs,28 mm diameter.Our olympic lifting barbell can hold 400lbs weight capacity, has the characteristics of high load-bearing capacity and flexibility,coated with a cutting-edge vibrant,yet corrosion-resistant powder coating that will last you a lifetime..
HEAVY-DUTY CHROME STEEL CONSTRUCTION:Our Steel Bar has hardened chrome shaft for durability and excellent bar feel.The Olympic Bar has a smooth,and well rounded feel,and gives the sensation of lifting bare steel.The Holleyweb Olympic Bar is designed to withstand your heavy training sessions and help you become strong as heck..
PRO-GRIP KNURLING:The 28mm grip shaft with a 1.2mm medium-level knurling.A Peaked Diamond Knurl pattern provides an excellent gripping surface without the sharpness of other grips,and have a moderate whip,increases friction and improves the grip experience.The knurling design can also effectively reduce the tension in the wrist and forearm,increase the safety of sports and ensure comfort..
NEEDLE BEARING & SLEEVES:The sleeves of barbells are often constructed with either bushings or bearings. Our Olympic bar sleeves are friction welded, it's stronger than normal weld....

Check Stock

2Pack 10Inch Bar Stool Swivel Plate Heavy Duty Chair Swivel Base with Solid Ring of Ball Bearings 600lbs Capacity Replacement Swivel Seat Parts Lazy Susan Hardware for Barstools Recliner Chair Boat

HEAVY DUTY SWIVEL REPLACMENT FOR FURNITURE—The bar stool swivel plates are made of solid ring of ball-bearing and heavy steel constructions, high holding capacity and smooth rotating operation, widely adapted for use as a furniture swivel base, such as bar stool , swivel, rocker, recliner chair, table.
360 DEGREE SEAT SWIVEL BASE— The swivel seat base has 54 solid ball bearings inside with lubricant for smooth movement without unnecessary wandering or rocking.
More ball bearings are always better at distributing weight.
REPLACe YOU NOISY OLD BARSTOOL PARTS—The swivel base of bar stools/chairs wears out after years of use and makes a metallic scraping sound.
You need a stronger, quieter seat swivel base replacement, providing your guests and customers with a full and easy swivel for easy access to the bar or table without limiting conversation.
EASY TO INSTALL— Measure the distance from bolt hole center to bolt hole center in your old broken swivel.
The swivel has slots so it is easy to align to your chair holes.
Package includes 10Inch bar stool bearing plates with black finished, steel plate thickness 0.9-1Inch, 600lbs holding capacity, heavy duty swiveling barstools/chair hardware.
WIDE APPLICATION—Based on stools' swivels construction a....

Check Stock

Drawer Slides BESUNTEK 10 inch Full Extension 3 Section Ball Bearing Side Mounted Drawer Slider for Cabinet Kitchen 2 Pairs

Made from high-grade cold rolled steel which is electrom zinc plated, durable and anti-rust. Steel ball-bearing action slides that ensures smooth and....
Coming with 2 pairs of 10 inch 3-fold ball bearing drawer slides, easy to install. However, the mounting brackets are not included. Side mounted, non....
Good close mechanism performance adds a concealed piston to slowly draw the drawer smoothly and silently closed.
Lever disconnect for easy drawer removal. Ideal for office furniture, cabinets, closets, kitchens.
We offer 30 days money back guarantee and 24 hours sincere customer service only if the item sold by BESUNTEK.

Check Stock

Olympic Barbell Curl Bar EZ Bar Strength Training Bar Threaded Chrome Barbell Bar for Weightlifting, Hip Thrusts, Squats and Lunges

SUPERIOR SPECS-170,000 PSI tensile strength steel. The length of the EZ bar is 47 inches (4-foot) , a solid 15lbs, 28 mm diameter. Our curl barbell can hold 300lbs weight capacity, has the characteristics of high load-bearing capacity and flexibility, coated with a cutting-edge vibrant, yet corrosion-resistant powder coating that will last you a lifetime..
HEAVY-DUTY CHROME STEEL CONSTRUCTION:Our Steel Bar has hardened chrome shaft for durability and excellent bar feel. The EZ Bar has a smooth, and well rounded feel, and gives the sensation of lifting bare steel. The Holleyweb EZ Bar is designed to withstand your heavy training sessions and help you become strong as heck..
PRO-GRIP KNURLING:The 28mm grip shaft with a 1.2mm medium-level knurling. A Peaked Diamond Knurl pattern provides an excellent gripping surface without the sharpness of other grips,and have a moderate whip,increases friction and improves the grip experience.The knurling design can also effectively reduce the tension in the wrist and forearm,increase the safety of sports and ensure comfort..
NEEDLE BEARING & SLEEVES:The sleeves of barbells are often co....

Check Stock

FURSTEL Metal Storage Cabinet, 71\ Tall Large Metal Cabinets with Doors and Adjustable Shelves, Lockable Steel Storage Cabinet for Garage, Office, Home, School, Warehouse - Black

【QUALITY MATERIAL】Heavy gauge cold-rolled steel plate makes the metal cabinet sturdy and durable, load capacity up to 150lbs per shelf. Automatic powder coating keep the storage cabinet surface anti-rust, anti-chipping and easy to clean..
【ADJUSTABLE SHELF】There are 4 adjustable shelves in this tall steel cabinet, you can move the shelves up or down according to your needs. And reinforced bar under each metal shelves increase the large storage cabinet load-bearing capacity..
【SAFETY & PRACTICAL】This metal storage cabinet has safety lock, 2 keys included, to keep inner items safe. 2 pre-holes on the back of the locking cabinet makes it possible to mount the cabinet on the wall, prevent the storage cabinet tipping..
【MULTIPURPOSE】The lockable metal storage cabinet offers extra storage space and keep the interior tidy. It can widely used as garage cabinet, home office cabinet, utility cabinet, pantry cabinet, shop cabinet or anywhere need to looks organized..
【EASY ASSEMBLE】This metal garage storage cabinet with doors and shelves is knock-down structure. Package include detailed installation manual and QR video to help you assemble cabinet easilly. Product demention: 70.86H×31.5H×15.75D inch..

Check Stock