ReviewsBelden Cable

Ancable UHF/PL-259 Male Solder Coax Connector with Reducer for CB Ham Radio Antenna,Pack of 10,Silver

Work with 50ohm low loss RF cable RG-8,RG-213,LMR-400 & Belden 9913.If your cable is RG-8X Mini-8 RG-59 LMR240 Type,then use UG-176 Reducers to fix the cable.(UG-176 reducer is included in the package).
Ideal for build or repair coaxial cables,use this connector to create your own UHF cable which is widely used in Wireless Communications Systems,Short Antenna Feeder runs or any other application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,SCADA, Mobile Antennas).Top DIY solution.
Silver plated body,pin,and sleeve good for conductivity and easier soldering.Note:the reducer is nickle plated not sivler.
The dielectric is Teflon to handle higher power and withstand high temperature when soldering and will not Melt.
All metal parts are made of brass copper,premium quality connector.

NOTE: This is a single cable, for wiring one speaker. If you are connecting a pair of speakers, you will need two..
All terminations are ultrasonically welded in our Seattle shop on our Sonobond Ultrasonic welder, using Belden cable..
Ultrasonic welding gives this cable exceptional pull strength and low contact resistance.

BNC Male Crimp Coax Cable Connector for 50 Ohm Coaxial Cable.
BNC Male Connector For Ham, CB & Radio Antenna Connections.
Connectors are Milled Brass with Nickel Plating for Durability.
This low loss Coaxial transmission line can be used in almost any application where good handling characteristics, improved shielding, and low loss is....

Made in USA with Foreign & Domestic Components.
Manufactured from Shielded RG6 coaxial cable suitable for outdoor or indoor use..
Cable Impedance: 75 Ohm, Black PVC jacket.
Made to International Specification, Individually Tested for Quality Control.
BELDEN USA branded patented design Nickel Plated BRASS compression male F- connectors.

COAXIAL MINI RG59 CABLE: The center conductor is made from true 75 Ohm 23AWG solid copper surrounded by an insulated layer of high-density....
HD MICRO BNC: HD Micro BNC delivers true 75 Ohm performance in a footprint 51% SMALLER THAN TRADTIONAL BNC connectors allowing four times the density.....
PROFESSIONAL APPLICATIONS: Designed for professional broadcast applications in mind. Adapt your Standard BNC connections to High Density Micro BNC....
BELDEN 4855R: 12G rated, 23AWG, 75Ohm. This cable is 100% sweep tested and is ready to meet today’s requirements of 12 Gbps data transfer. Supports....
CUSTOM CABLE CONNECTION QUALITY: Here at Custom Cable Connection, we are family owned and have been in business since 2002. We have made it our....

【 CRIMPING RG TYPE CABLE】 RG6,59,62,140,210, BELDEN 8279,55,58,141,142,223,303,400 Bnc Cable, Fiber Optic..
【 CRIMP SIZE】 .255"/.213"/.098"/.068"/.321" (6.48/5.41/2.49/1.73/8.15mm).
【 HIGH QULITY MATERIAL】 The crimping tool dies are made of Alloy Steel (AISI- 4140), after heat treatment the hardness can reach HRC44-51°, High-quality carbon steel is more resistant, stronger and not easy to deform, can be used for many years..
【 DIE SET ONLY】 Use multiple crimping dies with the same crimping tool, only need change the die set can save your money..
【 HIGH PRECISION】 High-precision crimping makes your work better and easier. We JRready pursue high-tech precision, so that each unit is accurate to the smallest range in the electrical tool professional field..

Assembled in our shop in Seattle, WA by American workers.
Heavy double-braid bare copper shielding provides the best protection available against induced low-frequency noise and hum.
Bulk cable stock manufactured to our specifications in Richmond, Indiana by Belden, the world leader in communications cabling.
Rated CM (superior to CL2, CL3) for in-wall installation.
available both in white and black jacket.
Taversoe crimp RCA plugs offer tight grip through spring contact tension, ensuring solid connection without the danger of jack damage..

Assembled in our shop in Seattle, WA by American workers.
Heavy double-braid bare copper shielding provides the best protection available against induced low-frequency noise and hum.
Bulk cable stock manufactured to our specifications in Richmond, Indiana by Belden, the world leader in communications cabling.
Rated CM (superior to CL2, CL3) for in-wall installation.
available both in white and black jacket.
Taversoe crimp RCA plugs offer tight grip through spring contact tension, ensuring solid connection without the danger of jack damage..

Assembled in our shop in Seattle, WA by American workers.
Heavy double-braid bare copper shielding provides the best protection available against induced low-frequency noise and hum.
Bulk cable stock manufactured to our specifications in Richmond, Indiana by Belden, the world leader in communications cabling.
Rated CM (superior to CL2, CL3) for in-wall installation.
available both in white and black jacket.
Taversoe crimp RCA plugs offer tight grip through spring contact tension, ensuring solid connection without the danger of jack damage..

Assembled in our shop in Seattle, WA by American workers.
Heavy double-braid bare copper shielding provides the best protection available against induced low-frequency noise and hum.
Bulk cable stock manufactured to our specifications in Richmond, Indiana by Belden, the world leader in communications cabling.
Rated CM (superior to CL2, CL3) for in-wall installation.
available both in white and black jacket.
Taversoe crimp RCA plugs offer tight grip through spring contact tension, ensuring solid connection without the danger of jack damage..

Perfect For: Coaxial wire stripping tool (Prep Tool), and cutter gives users an easy and cost-effective way to cut and strip wire and coaxial cables, category cables (phone/network), or prep ends for installing compression connectors.
Ergonomic Design: Cable stripping tool is constructed from sturdy, yet lightweight yellow plastic and features a safe (accident free) center blade to cut through any Cable depth.
Features: A spring loaded Cable cutter with an adjustable stripping blade for versatility.
Perfect For: Coax coaxial cutter works on an RG6/ RG59/ RG7/ RG11, plus strips outer jacket of UTP, STP Cable and CAT5 round telephone Cable , works exceptionally well with most compression connectors including, Digicon, Perfect Vision (PV), Klein, Gilbert, Holland, Lock and Seal, PPC (both short and long XL), Belden, Snap and Seal, Thomas and Betts, Stirling, and many, many more.
Quality Assurance: UL Listed and Includes a US manufacturer’s warranty.