ReviewsBelt Tensioner Tool Kit Harbor Freight

MOOSUN Centrifugal Clutch 3/4' Bore #35 Chain 12 Tooth for Go Karts Mini Bike Replace Parts (12T Centrifugal Clutch with #35 Chain)

  • Centrifugal Clutch 3/4" Bore 12 Tooth for 35 Chain Common clutch for 2-7 HP engines 2300±300 PRM.
  • Fits Honda GX160 GX200 GX140 GX120 GC160 GC190 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc.
  • Fit Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4" shaft Tecumseh Engines.
  • Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Go Kart Clutch kit includes two set screws and chain.
Check Stock

Knife Sharpening Angle Guide and 1 x 30 Leather Honing Belt with Compound

  • Knife Sharpening Angle Guide and 1" x 30" Leather Honing Belt with Compound.
  • Includes the Following: (1) Knife Sharpening Angle Guide -- (1) 1" x 30" Leather Honing Belt -- (1) 1-2 oz of White Diamond Buffing Compound.
  • This Specially Designed Package Comes with The Only Angle Guide on the Market which can be used with a Leather Honing Belt**! Sharpen as the belt....
  • Fits Harbor Freight 1" x 30" Belt Sander.
  • EVERY 1" x 30" Belt is tested to ensure a proper fit before leaving our warehouse!.
Check Stock

WEN Lavender Styling Creme 6oz

  • For Harbor Chicago Electric Predator 79CC 99CC 69733 68124 Engine.
  • For Buffalo Tools Sportsman 1500 2000 Watt 2.8HP Gas Generator B.
  • For Harbor Freight Predator 1 in. 79CC 63404 Gasoline Water Pump.
  • For Harbor Freight Pacific HydroStar 1IN 1" Water Pump 79CC 69747.
  • For Bluemax 3435 2.4HP 2200PSI 1.6GPM Pressure Washer.
Check Stock

Motovecor Centrifugal Clutch Go Kart Clutch Predator Engine Clutch Baja Mini Bike 3/4 Inch Bore 12 Tooth 12T for #35 Chain 6.5HP - Upgrade

  • Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 PRM.
  • Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh....
  • Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-6.5HP motors in all brands.
  • Perfect for Go Kart, Minibike and Fun Kart.
  • Go Kart Clutch kit includes two set screws, but chain is not included.
Check Stock

POWERTEC 110830 3 x 18 Inch Sanding Belts | 120 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper for Portable Belt Sander – 10 Pack

  • 1X30 Leather Honing Stropping Plus 4 Pack Assorted Sharpening belt Kit. This package is a great introduction to get you sharpening on your 1x30 Belt Sander. Like the popular Harbor Freight 1 X 30 Belt Sander and combination sander. Turn your belt sander into a knife sharpener today. MADE IN USA!!.
  • 120 Grit & 220 Grit Ceramic Sharpening Belts | Ceramic Grain Sharpening and Sanding Belts offer superior longevity and performance. The Ceramic Grain of the 1x30 sharpening belts constantly fractures to expose a sharp cutting surface. The extra flexible backing makes this sharpener's belt kit an ideal option for sharpening and contour sanding on your 1x30 belt sander. Ceramic 1x30 Belts are known to last longer and produce less heat than other materials..
  • 600 Grit & 1000 Grit Silicon Carbide Sharpening Belts | High Grit Silicon carbide abrasive belts are an industry standard for sharpening because of the grain's consistent and fast cutting properties. The silicon carbide grain of the 600 & 1000 grit sharpening belts offers consistent sharpening results..
  • Leather belt sharpening kit includes our Super Strop White Sharpening Compound, also known as buffing compound or rouge, it is specifically designed for powered leather strops. The compound should be applied a....
Check Stock

TOPEMAI 212CC Carburetor Carb for Harbor Freight Predator 60363 68121 68120 69730 69727 Engine R210 Gas Engine

  • Carburetor fit for Harbor Freight Branded 212CC Chicago Electric Predator Gasoline Engine..
  • 212cc Carburetor fits for Harbor Freight Predator 6.5hp Go Kart OHV Engine.212CC Carburetor fit Harbor Freight Predator 60363 68121 68120 69727 69730 6.5HP/7HP Engine (RATO R210-III)..
  • 212cc Carburetor Compatible with Honda 16100-ZL0-W51/16100-ZH8-W61, Compatible with Stens 520-718..
  • 212CC Predator Carburetor comes with 3pc gaskets and 1pc insulator,easy to use and good value for money. Size: Center mounting hole: 42mm, core hole: 19mm, choke hole: 24mm..
  • Feel free to contact us by emails if you have any problems..
Check Stock

WQAZ Sealed Ball Bearings Timing Belt Straighten Tensioner XY-Axle Printer Accessories Aluminum for CR10 CR10S Belt Tensioner Kit Less frictional Noise (Length : 10mm)

  • 1. Made of 2040 aluminum , XY-axis timing belt stretch straightening tensioner is easy to use..
  • 2. Fit for CR10 CR10S, this straighten tensioner keeps easy operation, easy to install..
  • 3. Keeps effective protection to extend the service life, such belt tensioner kit will not easy to damage..
  • 4. Built to strict quality control standards, belt tensioner kit can work as good accessories for 3D printer..
  • 5. Long service life with excellent quality, Simple and convenient to replace the old one..
Check Stock

Caltric compatible with Primary Clutch Sliding Fixed Sheave Kit Yamaha Rhino 700 YXR700F 2008-2013

  • Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 RPM. The 12T clutch has a broached 3/16" keyway with two set screw holes located 90 degrees apart.
  • Our go-kart clutch is made of high-grade steel, heavy-duty and long lasting. It can withstand the strain and heat caused by friction, once the clutch engages.
  • Perfect for Go Kart, Minibike and Fun Kart. Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft.
  • Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Go cart clutch kit includes two set screws, but chain is not included. The two set screw holes are tapped 1/4"-28.
Check Stock

Centrifugal Clutch 3/4' Bore 12 Tooth 35 Chain for Go Kart Mini Bike Fun Kart 2-7 HP Engine Fits for Honda GX160 GX200 GX140 GX120 GC160 GC19

  • Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Tecumseh Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4" shaft Tecumseh Engines.
  • Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Centrifugal clutch 3/4" bore 12 tooth #35 chain screw sets for go kart mini bike fun kart 2-7 HP engines 2300±300 PRM.
  • 3 /4-inch centrifugal clutch for single wheel belt direct drive karts with tires No Larger Than 15" tall.
  • Package included:1x 12 Teeth Centrifugal Clutch, 1x #35 Chain, 2 x built-in screws and 1 x Connecting Link, Easy installation, a perfect replacement part for your mini bike and go kart..
Check Stock

DPTOOL Engine Camshaft Tensioning Locking Alignment Timing Tool Kit for Chevrolet Alfa Romeo Cruze 16V 1.6 1.8

  • Applicable Engine: Compatible with Chevrolet Aveo Cruze Orlando Trax Opel Vauxhall saab Alfa Romeo Fiat 16V 1.6 1.8 engine, fits Chevrolet Cruze, Orlando 1.4,1.6,1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines.
  • Applicable Vehicle Model: fit Chevrolet /Aveo /Cruze /Orlando /Trax 1.6 1.8.
  • fit Opel /Vauxhall Astra-G / H / Corsa-D / Insignia / Mervia / Signum / Vectra-C / Zafira-B 2003-2011.
  • Must Have Timing Tool: Includes : 2 Camshaft gear locking tools, 1 Camshaft locking tool, 1 Flywheel locking tool, 1 Engine Tensioner spanner, 1 V-ribbed belt tensioner locking tool, 1 Timing belt tensioner locking tool, 1 Crankshaft locking tool, All the tools have been put in a case, easy to carry and find. help you locking the camshafts in their required timed position.
  • Accurate: All tools have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine, as same as the OEM.
  • Quality Guarante: Our camshaft timing tool made of high quality steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer or alloy plated, extended service life, and we offer 12 month warranty.
Check Stock

Fire Apparatus Driver/Operator: Pump, Aerial, Tiller, and Mobile Water Supply

  • 【REPLACE PART NUMBER】 Water pump & gasket : 16100-09201丨 Hydraulic tensioner : 13540-50030丨 Thermostat : 90916-03100丨 Tensioner roller / pulley : 13503-0F010 / 13503-50011 | Idler roller / pulley : 13505-0F010 / 13505-50030丨 Front camshaft seals : 90311-38065丨 Front crankshaft seal : 90311-A0001丨 Timing belt : 13568-09070丨 Serpentine drive belt :90916-02586.
  • 【FIT FOR LEXUS】 1998-2000 GS400 丨 2001-2007 GS430 丨 2003-2009 GX470 丨 1990-2000 LS400 丨 2001-2006 LS430 丨 1998-2007 LX470 丨 1992-2000 SC400 丨 2002-2010 SC430.
  • 【FIT FOR TOYOTA 】 2003-2009 4RUNNER 丨1998-2007 LAND CRUISER 丨2001-2009 SEQUOIA 丨 2000-2009 TUNDRA.
  • 【WHAT WILL YOU GET】 1*Water Pump Gasket丨 1*Hydraulic Tensioner 丨1* Thermostat 丨 1*Tensioner Roller丨 1*Idler Roller丨 2*Front Camshaft Seals丨 1* Front Crankshaft Seal丨 1*Timing Belt丨 1*Serpentine Drive Belt丨 Totally 10 Pieces Set of Timing Belt Water Pump Kit.
  • 【SALE SERVICE】 Please Check Carefully Whether the Oe Number of Our Product Is Applicable to Your Vehicle‘s Model Before Purchasing. Whenever I....
Check Stock