ReviewsBeltronics Radar Detector 2

Car Radar Mount, Crossery Windshield & Dashboard Radar Detector Suction Mount for Escort Passport, Beltronics Vector & Rocky Mountain Phantom-T Radar Detectors, Easy To Install, Adjustable, Black

  • ⇒ A WORLD CLASS DESIGN. Our car radar mount is compatible with almost all Escort, Beltronics and Rocky Mountain Phantom-T radar detectors. With the rotating knob you can adjust the angle of the detector to make it perfectly match with the pitch of the windshield..
  • ⇒ PREMIUM BUILD. Crossery Radar Detector Mounts are made from the highest grade materials for superior performance under extreme heat and cold weather conditions and its powerful single suction cup offers strong adherence to the windshield or dashboard. Will NOT work with the ESCORT PASSPORT MAX series..
  • ⇒ EASY INSTALLATION. Simply open the locking clamp, position the sticky cup on the windshield or dashboard and close the locking clamp. Then carefully slide the bracket into the detector mounting slot. Our car mount will hold your radar detector firmly, even on the most rugged roads..
  • ⇒ 100% SATISFACTION GUARANTEED. You are protected by our 2 YEAR COMPREHENSIVE WARRANTY and if you aren’t completely thrilled with our escort radar mount for whatever reason, you can request a FULL REFUND or we will send you another BRAND NEW CROSSERY CAR RADAR DETECTOR MOUNT to your door step. No questions asked..
Check Stock

YeeBeny Suction Radar Detector Mount, Windshield & Dashboard Radar Holder Compatible with Escort Passport 9500ix 7500 X50 X70 X80 Solo SC S2 S3 s75 Beltronics RX65 GX65 Red (Not for Escort IX & MAX)

  • COMPATIBLE: This suction radar detector mount is compatible with most products of Beltronics and Escort Models like Beltronics GX65 Red, RX65, V10, V12, Pro 100 and Escort Passport 9500ix, Passport 9500i, Passport 8500. Please refer to description for a list of models. Not for Escort IX & Max Series..
  • POWERFUL: Super sticky suction mount that is much better than the factory mount. The suction cup radar detector holder offers strong adherence to the windshield & dashboard..
  • ADJUSTABLE: The mount has the metal clip that inserts into the radar detector with the adjustment knob you can adjust the angle of the radar detector..
  • REUSABLE: The sticky suction cups can be reused. Although powerful, the sticky suction cups are easy to remove and secure. Simply rinse the suction cup with a mild liquid soap and warm water and then air dry to restore suction..
  • 100% SATISFACTION: We will provide you the best service. NOTE: Don't place the mount in or near the deployment area of the airbag, and don't install it in a position that obstructs road observation. If you have any questions about the product, you can always contact us..
Check Stock

Radar Detector Mount,Car Radar Mounting Bracket Suction Cup Holder,Windshield & Dashboard Radar Detector Suction Mount,for Cobra Escort Valentine One Beltronics Radar Detector,Easy to Install

  • Compatible with Cobra, Escort, Valentine One, and Beltronics Radar Detector, the width of the suction cup mount insertion interface is 0.86 inches, Please confirm the size of the radar detector interface before purchasing,This suction cup mount is not compatible with Escort MAX series..
  • Easy to install, suction cup mount designed as a special rotary switch. With the adjustment knob, it can lock the optimal position of the radar detector to make it perfectly match the spacing of the windshield..
  • Suction cup mount has excellent performance in extremely hot and cold weather conditions, and its powerful vacuum suction can be firmly attached to the windshield or dashboard..
  • Our radar detector suction cup mount is made of ABS+alloy material, which is durable,please buy with confidence purchase..
  • Multiple ways of use,(1)The large suction cup mount of the radar detector is used alone (2)Windshield Suction Cup Mount Holder can be used alone,The attached 6 suction cups will allow you to use it for many years..
Check Stock

Radar Detector Cable, USB to RJ11 Plug Cable,for Escort Valentine One Uniden Beltronics Cobra Whistler Radar Detector,Replacement Power Cable for Radar Detectors (RJ11-3.3ft)

  • ✅【The Latest Patented Technology】After experimental comparison, the ordinary USB cable is incompatible with the working voltage of most radar detectors, which causes the radar detectors cannot be started.To solve this problem,our department has developed a radar detector cable with two working voltages at the same time. You can switch the USB socket at will without affecting the use of the radar detector..
  • ✅【Stable Working Performance】The radar detector cable adopts a new chip encryption technology to ensure that the radar detector can be stably turned on when the cable is connected to 5V or 12V USB interfaces,giving you all around protection wherever your adventures take you..
  • ✅【High Quality Copper Material】Industrial grade high quality copper conductor is used, which is closely connected with the conductor to improve the transmission quality and avoid external interference. High elastic PVC adhesive layer, avoid winding, not easy to damage..
  • ✅【Compatible】It can power radar detectors with phone type jacks. Compatible with Uniden, Escort, Beltronics, Valentine one and other Telephone Plug RJ11 radar detectors..
  • ✅【Multiple Choice】We have charging cables of various lengths, 6.56ft: B0BLTSC26Z, 9.84ft: B0BLTSS9C2.
Check Stock

Radar Detector Cable, USB to RJ11 Plug Cable,for Escort Valentine One Uniden Beltronics Cobra Whistler Radar Detector,Replacement Power Cable for Radar Detectors.(RJ11-6.56ft)

  • ✅【The Latest Patented Technology】After experimental comparison, the ordinary USB cable is incompatible with the working voltage of most radar detectors, which causes the radar detectors cannot be started.To solve this problem,our department has developed a radar detector cable with two working voltages at the same time. You can switch the USB socket at will without affecting the use of the radar detector..
  • ✅【Stable Working Performance】The radar detector cable adopts a new chip encryption technology to ensure that the radar detector can be stably turned on when the cable is connected to 5V or 12V USB interfaces,giving you all around protection wherever your adventures take you..
  • ✅【High Quality Copper Material】Industrial grade high quality copper conductor is used, which is closely connected with the conductor to improve the transmission quality and avoid external interference. High elastic PVC adhesive layer, avoid winding, not easy to damage..
  • ✅【Compatible】It can power radar detectors with phone type jacks. Compatible with Uniden, Escort, Beltronics, Radenso XP etc and other Telephone Plug RJ11 radar detectors..
  • ✅【Multiple Choice】We have charging cables of various lengths, 3.3ft :B0BLTQK74Y .9.84ft B0BLTSS9C2..
Check Stock

SDSACZMU Radar Detector Cable, USB to RJ11 Plug Cable,Replacement Power Line of Radar Detector,for Uniden Escort Beltronics Valentine One Radar Detector, 6.56 ft

  • The radar detector cable is made of high-quality thick copper core, which improves the stability of power transmission,When the power line is connected to 5V or 12V USB interface, the radar detector can be used normally..
  • Outer layer of the cable is made of high elastic, environmentally-friendly and thickened PVC material, which is resistant to high temperature and does not burn, strong and tough, does not break the skin, does not knot, anti-winding and anti-stretching, and is durable, and remains flexible and intact after long bending..
  • Radar detector cable has two working voltages at the same time,It can switch the USB socket freely without affecting the use of the detector, It can supply power to the radar detector through the telephone jack..
  • Our RJ11 power cord is suitable for the radar detector of the Uniden Escort Beltronics Valentine One and the radar detector of the RJ11 telephone plug,This line is 6.56 ft ..
  • If you have any questions about the product, please feel free to contact us through Amazon, and we will give you a satisfactory reply as soon as possible..
Check Stock

Radar Straight Power Cord Compatible with Uniden R3 R7 R1 Radar Detector, for Passport 9500i/7500S/8500/7500/6800, Radar Passport 8500 X50, Valentine One Radar Detector, etc (3.5m/11.5ft)

  • The Escort & Beltronics straight power cord is 3.5m/11.5ft..
  • The Escort & Beltronics Straight Power Cord can reach your plug-in without any problem, and can make the wire go around or around, so it will not hinder you, nor interfere with anything else in the car..
  • High quality Escort & Beltronics straight power cord adapter, compact, light and easy to use. Red LED indicator light confirms cord is receiving power..
  • Compatible with Escort: Passport 9500i, Passport Radar 8500 X50, 8500 Escort Passport Radar 6800, 7500, 7500S, C65 Escort Passport, Escort Passport SC55, Solo S2, Valentine One Radar Detector..
  • Compatible with Beltronics: GX65, Pro 100, Pro 200, Pro 300, Pro 500, RX65, RX55, STi Driver, STi Magnum, Vector 995, Vector 965, Vector 955, Vector 940 (phone style connector), Vector 895, Express 795..
Check Stock

Radar Detector Mount,Car Radar mounting Bracket Suction Cup Holder,Windshield & Dashboard Radar Detector Suction Mount,for Cobra Escort Valentine One Uniden Beltronics Radar Detector,Easy to Install

  • Our car radar mount is compatible with Cobra 、Escort 、Valentine One 、Uniden 、Beltronics Radar Detector, This Suction Cup Radar Detector Mount width is 0.86in, Please carefully check the size of the insertion port of the radar detector..
  • Superior performance under extreme heat and cold weather conditions and its powerful suction cup offers strong adherence to the windshield or dashboard. The base glue is thickened, with double suction, super strong adsorption will last for a long time.Our Experiment shows, this suction mount can hang up 11 POUNDS of cola..
  • SIMPLE structure and FRIENDLY design, suction cup mounts are special, rotary switches, and feature adjustment knobs for optimal radar detection of the windshield. it will not vibrate or shake during driving. Easily use your detector in a second car..
  • The suction cup adopts industry-leading technology and adds high-density silicone material, which has excellent resilience, anti-skid, shock-proof and other characteristics to ensure that your radar detector is protected from wear and tear..
  • The radar detector bracket is made of high-quality ABS+ alloy material, non-toxic and non-irritating odor, and is strictly tested and produced according to the standard to protect the health of you and your fami....
Check Stock

AccessoryBasics Universal Car Rear View Mirror Radar Detector Adhesive tab Mount for Radenso SP Pro Valentine One Whistler CR 65 70 75 80 85 90 XTR 130 RX Meter Cobra XRS ESR SPX ESD Radar Detector

  • Basic Radar Detector Rear View Mounting Solutiuon for LESS.
  • Universal Car Rear view Mirror Radar Detector Mount for Uniden R3 R1 Radenso SP Pro V Valentine One Whistler Beltronics PRO RX Cobra XRS ESR SPX ESD....
  • Easy install Universal Stick on Slide in Plate Design.
  • No More Troublesome Suction Cups and Install in Most Cars min Minutes (PLEASE NOTE THAT this mount need 1 inch clear stem space to setup).
  • COST LESS THAN 1/2 OF OTHER RADAR DETECTOR MIRROR MOUNT.
Check Stock

Radar Detector Mount,Car Radar mounting Bracket Suction Cup Holder,Windshield & Dashboard Radar Detector Suction Mount,For Cobra Escort Beltronics Valentine One Radar Detector,Easy to Install

  • Compatible with Cobra, Escort, Valentine One, and Beltronics Radar Detector, the width of the suction cup mount insertion interface is 0.86 inches, Please confirm the size of the radar detector interface before purchasing..
  • Easy to install, suction cup mount designed as a special rotary switch. With the adjustment knob, it can lock the optimal position of the radar detector to make it perfectly match the spacing of the windshield..
  • suction cup mount has excellent performance in extremely hot and cold weather conditions, and its powerful vacuum suction can be firmly attached to the windshield or dashboard..
  • Our radar detector suction cup mount is made of ABS+alloy material, which is durable,please buy with confidence purchase..
  • The suction cups can be washed repeatedly and air-dried to restore suction.Easy to use in the second car..
Check Stock

Radar Detector Mount, Car Rear View Mirror Radar Detector Mount, for Cobra Escort Valentine One Beltronics Radar Detector (at Least 1 inch of Clear Rod Space is Required for Installation)

  • Compatible models: Cobra, Escort, Valentine One, Beltronics, The width of the mount connecting the radar detector port is 0.86 inches, Please confirm the size of the radar detector insertion port before purchasing.
  • The rearview mirror mounting base is made of ABS environment-friendly raw materials, The radar detector mount ball joint adapter is made of alloy materials,The surface is anodized to improve corrosion resistance, wear resistance and heat resistance.
  • No More Troublesome Suction Cups and Install in Most Cars min Minutes PLEASE MAKE SURE THAT YOU HAVE AT LEAST 1 INCH OF STEM SPACE TO INSTALL THIS MOUNT (Not Compatible w/Corvette & vehicle with short stem).
  • The rear view mirror radar detector mount is easy to install and can be easily used in the second vehicle without tools.
  • Brand New in Package（Manufacturer direct replacement warranty）.
Check Stock