ReviewsBending Mandrel

Stainless Steel Expanding Ring Mandrel Set

  • Best-quality ring mandrel made of stainless steel, which withstands sanding much longer than regular steel..
  • Expanding mandrel offers a high level of precision when making rings. Designed to be used in a lathe. Also fits in 1/2" drill chuck..
  • Varied steps offer plenty of space to work on many styles and sizes of rings. Length is short enough to stay true while spinning..
  • Small size mandrel fits ring sizes 4.5 to 7. Medium mandrel fits ring sizes 7.5 to 10.5. Large mandrel fits ring sizes 11 to 13.5..
  • Includes a hex wrench to expand and contract the mandrel. You will soon wonder how you got along without this tool!.
Check Stock

TOTALFLOW 47-409-201-15 Universal Straight Exhaust Pipe Extension - Tube Replacement 409SS Straight Tube 2 Inch Outer Diameter - 47 long Exhaust Pipe.

  • Fit Type: "Universal Fitment". Please double check your exhaust size prior to placing your order to avoid restocking and inbound/outbound shipping....
  • 2 Inch Outer Diameter Exhaust Pipe Both Ends, Approx. ± 47 Inch Long.
  • Made from quality - Heavy Gauge - Approx. ±16 Gauge- 409 stainless steel - Tube/Pipe..
  • Tubes are seam welded to maintain size integrity for easier mandrel bending.
  • Perfect for any custom exhaust project or exhaust repair. For FITMENT or WARRANTY information, please refer to the MANUFACTURER site..
Check Stock

Ring Bender Ring Bending Tool Ring Bender Tool for Spoon Rings Jewelry Making, Ring Maker with Ring Sizer Measuring Tool Set (Ring Sizer, Ring Mandrel),Rubber Hammer

  • 【What You Will Get】The ring bending tool set comes with dual-head rubber hammer and Ring Sizer Measuring Tool(including Metal Finger Sizer Measuring Ring Tool and Aluminum Ring Mandrel 4 Measurement Size), equipped with a set of six white nylon dies, which may be needed when you are making rings.Perfect gift for craft lover..
  • 【Premium Ring Bender】The Ring making tools are made from solid steel and then hardened to 45-50 HRC.each steel post and die(Six matching precision columns and dies of sizes 12, 14, 16, 18, 20, and 22 MM, as well as dies of 60 and 90 degrees and a convenient organizer base in matching form. are black oxidized, no corrosion for life..
  • 【4 Size Ring Sizer Measuring Tool】The metal ring rod measuring tool specially designed for measuring rings comes with 4 sizes: US sizes of 1-15 (Specific to quarter size), European size (CU 41-76 ), Japanese size (m/m∮1-34), FR Standard Size 1-36. which can meet the measurement needs of different sizes of fingers..
  • 【Exceed Higher Quality】The 27pcs ring sizer gauge set is made of stainless steel material for long time using, Each ring is laser engraved wi....
Check Stock

Utoolmart Metal Ring Sizer Mandrel Bracelet Stick Gauge Measuring Jewelry Tool Hammer Set Jewelry Tool

  • 【Jewelry Rubber Mallet】- Jewelry mallet will provide perfect strike without scratching or damaging the surface of materials. Rubber head would not leave traces on the jewelry or damage your jewelry. The head diameter: 25mm. Fine workmanship and high quality..
  • 【Wood Ring Mandrel】- Wood ring mandrel is perfect for ring making and shaping, fix bent rings.great for holding rings for polishing and sanding..
  • 【Metal Ring Mandrel】- Utoolmart metal ring mandrel is made of steel, US size 0-15, come in half sizes.The ring sizes are clearly marked, easy to use and accurate to the size. Great for professional and beginners..
  • 【Perfect Performance】- This is a nice basic ring adjuster repair kit. Great for someone get into jewelry-making as hobby and on-line shopper for ring size determining. Good for fix bent rings, making the bent ring round again..
  • 【Ring Making and Shaping Tool Kit】- Package Include: Wood Ring Mandrel + Jeweler Rubber Hammer + Metal Ring Mandrel +Metal Ring Mandrel..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-8 1/4 x 1/2 Gap 0.376-0.500 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

Handmo 2 Into 1 Exhaust for 2006-2017 Harley Dyna Street Bob,Wide Glide,Lowrider,Super Glide, and Dyna Other Models

  • 【GREAT LOOKING.】What makes your bike special? A well working 2 into 1 exhaust for harley dyna parts upgrading with a great looking..
  • 【WORKING WELL.】You can feel the differences noticeable. Full-coverage heat shield makes your riding journey cooler and better..
  • 【TOP NOTCH APPEARANCE=OEM QUALITY.】You will impressed with the great quality by precisely mandrel bending, automatic welding, artisan polishing, and shiny chromizing..
  • 【QUALITY PRODUCTS AT REASONABLE PRICE.】Not overpay for big names of the same quality. The best offer for you 2006-2017 Dyna models. Take it..
  • 【EASY TO INSTALL WITH SEPARATED PIPES.】Installation would be a breeze. No fighting with the angles, and twists..
Check Stock

26PCS Cut-off Wheel Screw Mandrel Set, 2mm/3mm/6mm Screw Mandrel for Rotary Tools (1/8 Shank, 1/4 Shank)

  • 10 PCS 2mm (Approx 5/64)Screw Mandrel 3mm( Approx 1/8) Shank.
  • 10 PCS 3mm (Approx 1/8) Screw Mandrel 3mm ( Approx 1/8) Shank..
  • 3 PCS 6mm (Approx 1/4) Screw Mandrel 3mm (Approx 1/8) Shank.
  • 3 PCS 6mm (Approx 1/4) Screw Mandrel 6mm (Approx 1/4) Shank..
  • The base mandrel is suitable for discs such as diamond cutting wheels, resin cutting wheels and small saw blades..
Check Stock

4-Piece Bench Anvil Combination V-Slot Bench Pin Ring Round Bracelet Mandrel Vise Jewelry Making Metal Forming Kit

  • This 4-piece convenient bench tool kit includes a ring mandrel, Round bracelet mandrel, a wooden V-slot bench pin, along with a bench mounting system....
  • The wooden bench pin and bracelet mandrel will fit perfectly into the opening underneath the anvil (one at a time) - held when the entire device is....
  • The hardened steel ring mandrel is marked with U.S. sizes 1 through 15.
  • The hardwood bench pin measures is cut with a v-slot.
  • The Round bracelet mandrel is constructed from hardened steel and designed with a tang.
Check Stock