ReviewsBent J bolts

ARONOVA Battery Hold Down Sets,With Billet Aluminum Battery Tie Down Bracket And 18-8(304) Stainless Steel J bolts(Red, 8 inch bolts)

  • Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets..
  • Designed for batteries 6.89" (175mm) wide or slightly narrower..
  • Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks.
  • Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture..
  • Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries).
Check Stock

J-Bolt Post Hinge 6\ - Hinge Bolts Thru The Post Includes Nuts - J-Bolt Hinge has 5/8\ Male Pin - Fence Bolt Though Post Hinge - Quantity 2

  • Dimensions - 6" length (4.25" usable thread) - .625 diameter - 5/8" hinge pin - pin height ~1.5".
  • J-Bolt Hinge has 5/8" hinge pin to work with common gate frame hinges.
  • 6" Gate Hinge is made of galvanized steel to prevent rust and corrosion.
  • J-Bolt thru post hinges are easily adjusted even after the gate is installed.
  • Nuts for gate hinge are included - Washers are NOT Included.
Check Stock

MEROM Halo Bolt AC Adapter Halo Wall Plug Car Jump Starter Charger Cord Replacement Compatible with Halo Bolt 55720/58830/Halo Bolt 1201 Jump Starter/Bolt ACDC Wireless/Bolt Air Portable

  • 【Specification】For Halo Bolt car jump starter charger AC adapter with 5ft/1.5M long enough power cord, input AC 100V-240V.
  • 【Compatibility】This Replacement Halo Bolt Charger Compatible with HALO BOLT 57720/58830/HALO1201/ACDC 58830 Portable Charger, Car Jump Starter CEN TECH 4 IN 1/3 IN 1 CENTECH Portable Power Pack Battery.
  • Peak 350 AMP J7CS/J45TK 700 AMP J5C09/STA-J5C09/J312/DPS109/STA-DPS109 Jump Starter.
  • Solar Jump-N-Carry 660/KKC-660/JNC660/SOLJNC660-BF Jump Starter (NOTE⚠️Pls read carefully above selected models before order⚠️).
  • 【Quality Assurance】This Charger for Halo Bolt car jump starter is made of high quality materials, the wire adopt PVC material to ensure it has a great performance on tensile resistance, anti-aging, anti-corrosion, anti-cracking..
  • 【Security】This Replacement Halo Bolt charger is Tested, approved and certified by FCC, CE and ROHS, and designed with safeguard features against short circuiting, overvoltage, overcurrent, and internal overheating..
Check Stock

Steel J-Bolt Hinge Doors Gates 1/2 Inch Heavy-Duty Welded Hinge Heavy-Duty Driveway Gates for Welding on Larger Iron or Steel Gates, 2 Packs

  • J-Bolt Hinge is the perfect accessory for your iron gate or revolving door..
  • J hinges made of heavy and strong iron, you can use it for a long time..
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Product dimensions: please see product images..
  • Package Include: 2 Packs welded hinge, 2 bolts, 4 nuts, and 4 washers..
Check Stock

Signature Fitness SF-3 1,500 Pound Capacity 3” x 3” Power Cage Squat Rack Includes J-Hooks and Safety Straps Other Optional Accessories Red

  • Dimensions: 83.46" Height, 51.18" Width, 38.78" Depth.
  • Fully adjustable J-Hook and Safety Strap position - 47 vertical holes and "westside" spacing on bottom half of each upright pole allowing for the....
  • Built with 3"x3" 11-gauge steel - maximum stability and durability, holds up to 1,500lbs.
  • Includes multi-grip pull up bar along with bolts and instructions to bolt rack into the ground or floor.
  • Includes UHMW-coated J-Hooks and safety straps - 200 dollar value, free.
  • many additional accessories available for purchase.
Check Stock

MagnaFlow Cat-Back Performance Exhaust System 17876 - Pro Series, Stainless Steel 5in Main Piping, Single Passenger Side Rear Exit, Satin Finish Muffler with No Tip - Ram Truck Exhaust Kit

  • AGGRESSIVE SOUND/PRO SERIES - This diesel performance exhaust is designed to increase power and sound without sacrificing comfortable levels of interior noise. Fast-flowing mandrel bent pipes with straight-through mufflers facilitate reduced exhaust restriction and that signature MagnaFlow sound. Specifically designed for the 2003-2007 Dodge Ram 2500/3500.
  • CAT-BACK PERFORMANCE - The system is 50-state legal, features 5” mandrel bent tubing and is designed to replace the original exhaust components following the last emissions device. Features a satin finish muffler and no tip with a no hassle emissions legal design.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifetime of your vehicle.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorpora....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 16638

  • MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifetime of your vehicle.
Check Stock

Nut and Bolt Thread Checker Inch & Metric - 26 Male/Female Thread Identifier Gauges - 14 Inch & 12 Metric Sizes

  • Nice Bundle: These thread gauges includes 26 male/female gauges - 14 inch & 12 metric. Each size has a nut and bolt checker on the same gauge. The....
  • Efficiency Improving: No more bent over the container looking for a nut/bolt to finish your project. Identifying the size and thread of nuts and bolts....
  • Handy Tool Which You Should Have One: Excellent item for the mechanic.
  • Applicable to mechanical repairs, or common threads in plumbing, air and gas....
  • Convenient hanging: The wire cable of this thread identifier with loop for hanging it on the wall in your workshop or garage beside your toolbox..
  • Quality Process and Material: These nut & bolt thread checkers are made of strong stainless steel. Inch gauges are clear zinc plated, metric gauges....
Check Stock

Tsudo 08 09 10 11 Lancer De/Es/GTS N1 JDM Axleback Exhaust V2

  • Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance.
  • CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow.
  • Significant weight reduction compared to OEM exhaust system.
  • Improves horsepower, torque, throttle response, and fuel mileage.
  • Includes all necessary hardware (bolts and gaskets) for Bolt-on installation with typical hand tools.
Check Stock

Tsudo 08 09 10 11 Lancer De/Es/GTS N1 Titanium Tip Axleback Exhaust V2

  • Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance.
  • CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow.
  • Significant weight reduction compared to OEM exhaust system.
  • Improves horsepower, torque, throttle response, and fuel mileage.
  • Includes all necessary hardware (bolts and gaskets) for Bolt-on installation with typical hand tools.
Check Stock

Solar Panel Bird & Critter Guard Kit – 6 in x 100ft Roll Wire Mesh & 50 Stainless Steel Clips - Heyco Products

  • Includes one 100 foot roll of 6" wide (black) PVC coated, galvanized welded steel mesh and 50 stainless steel J-Hook clips..
  • Helps protect solar panels from rodents and nesting birds with wire screening. Does not violate panel integrity. Installs quickly and easily with standard linesman pliers. Mesh is removable without damage to solar panel system..
  • 303 Stainless Steel J-Hook easily attaches to the solar panel frames and can easily be trimmed or bent after assembly. Clips are Made in the USA..
  • 304 Stainless Steel Washers will firmly hold wire mesh screen to the module assembly preventing squirrels and rodents from damaging the interconnection wires and birds from building nests under the solar panel..
  • Mesh dimension is 1/2 ̋ x 1/2 ̋. DFARS compliant..
Check Stock