ReviewsBevel Edge Laminated Floor

Lady Ninja Kasumi Vol 5 Counterattack

Kasumi 3-inch Japanese paring knife is ideal for peeling and paring ingredients.
Damascus pattern is eye catching and rust free.
The edge is beveled on both sides, but the bevel is much larger than the bevel on a European or American brand and creates a sharper edge.
The asymmetrical handle is made from multiple layers of wood impregnated with a plastic resin and is riveted to the full tang.
Kasumi knives are produced by Sumikama Cutlery in Seki, Japan.

Check Stock

XCMAN Reparatur Tool Grinding Rubber Gummy Abrasive Block Stone Removes Rust and Burrs - Blue 150 Grit Fine

XCMAN Complete Ski Snowboard Edge Tuning Care Kit - Everything you need to professionally sharpen ski and snowboard edges.Side edge bevel multi tool (does all of side angles) and includes a metal file(Size:L80xW20xH3.3mm) and a deburring gummi stone(Size:L50xW40xH20mm)..
This ski edge tuner kit is all you need to sharpen and bevel your edges for side edges. Dial a precise SIDE angle from 1 degree to 4 degrees(86/87/88/89 degrees). Does every angle imaginable!.
One Gummi Stone for prepping an edge,deburring as the final step in edge sharpening, or detuning.Polishing your steel edge clean and shine..
Don't know your angles? You can use this tool to find them - it's easy..
4pcs PTEX candle for repair your base,2pcs black,and 2pcs transparency..

Check Stock

Amoolo 6-1/2\ 24T Circular Saw Blade for Cutting Wood, Plastic and Wood Composite with 5/8\ Arbor (6.5\-2pcs)

【DIMENSIONS】- Includes 2pcs of 6-1/2" & 5/8" arbor 24T TCT circular saw blade..
【WIDE APPLICATIONS】- Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
【FULLY HARDENED STEEL BLADE BODY】- Delivers accuracy and resists bending and deflection for true cuts..
【ATB TEETH DESIGN】-Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
【TUNGSTEN CARBIDE TEETH】- Provides excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..

Check Stock

Luckyway 2-Pack 6-1/2 Inch 18T&24T with 5/8 Inch Arbor TCT Circular Saw Blade for Cutting Wood

DIMENSIONS - Includes 1pc 6-1/2*5/8*18T & 1pc 6-1/2*5/8*24T TCT saw blade..
APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
FEATURES - Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
Tungsten carbide teeth provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..

Check Stock

BOSCH Tools Track Saw - GKT13-225L 6-1/2 In. Precison Saw with Plunge Action & Carrying Case

Track saw with plunge action – provides fast, easy setup for one-step clean finish cuts in wood and wood-based sheet goods such as laminated particle boards and plywood.
Plunge mechanism – allows for precise plunge cuts with accurate depth of cut.
Single bevel pivot point – when sawing using a track (sold separately), the track can be positioned in the same way for bevel cuts or non-bevel cuts.
Constant electronics – helps maintain speed under the load of more-demanding applications.
Overload protection – protect the motor from overheating.
Efficient dust extraction – when connected to suitable vacuum cleaner, supports easier working conditions.
Swiveling hose port – keeps optional vacuum cleaner hose out of the way.
Easy blade-change system – quick three-step blade swap with spindle lock and on-board hex key.
Tracking adjustment – features front and rear knobs for adjusting the precision of the fit of the saw to the track to deliver the best cutting experience.
Specialized 48-tooth 6-1/2 In. track saw blade – designed for clean, precise results.

Check Stock

Amoolo 4-1/2\ 24T Arbor Circular Saw Blade for Cutting Wood, Plastic and Wood Composite with 5/8\ Arbor (4.5\-3pcs)

【DIMENSIONS】- Includes 3pcs of 4-1/2" & 5/8" arbor 24T TCT circular saw blade..
【WIDE APPLICATIONS】- Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
【FULLY HARDENED STEEL BLADE BODY】- Delivers accuracy and resists bending and deflection for true cuts..
【ATB TEETH DESIGN】-Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
【TUNGSTEN CARBIDE TEETH】- Provides excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..

Check Stock

Luckyway 2-Pack 12 Inch Miter Saw Blades 32T&80T with 1 Inch Arbor TCT Circular Saw Blade for Cutting Wood

DIMENSIONS - Includes 1pc 12*1*32T & 1pc 12*1*80T TCT circular saw blade..
APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
FEATURES - Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
Tungsten carbide teeth provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..

Check Stock

Luckyway 2-Pack 7-1/4 Inch 24T&60T with 5/8 Inch Arbor TCT Circular Saw Blade for Cutting Wood

DIMENSIONS - Includes 1pc 7-1/4*5/8*24T & 1pc 7-1/4*5/8*60T TCT saw blade..
APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
FEATURES - Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
Tungsten carbide teeth(TCT) provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf. Tougher tungsten carbide teeth stays sharper longer life..

Check Stock

KIAYACI Glass Chair Mat for Carpet or Hard Floor Tempered Glass Glass Table Top Table Mat Square 46' x 53', 1/4 inch Thick, Transparent

Tempered Glass: The glass chair mat is made of tempered glass, much harder than ordinary glass, it will not broken even hit by bat..
Anti-Slip Sticker: There are 4 anti-slip sticker, you could stick it on the mat if you need..
Best for Chair with Wheel: With this chair mat, you could slip on your chair smoothly, and your floor and carpet will not be hurt..
Bevel Edge: This glass mat with beveled edge, it will make you slip up and down the mat easily..
Multiple Use: You could use it as table mat or table top if you buy some legs for it, it will also work well..

Check Stock

Luckyway 2-Pack 10 Inch Miter / Table Saw Blades 32T&60T with 5/8 Inch Arbor TCT Circular Saw Blade for Cutting Wood

DIMENSIONS - Includes 1pc 10*5/8*32T & 1pc 10*5/8*60T TCT circular saw blade..
APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
FEATURES - Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
Tungsten carbide teeth provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..

Check Stock

Luckyway 4-Pack 4-1/2 Inch 24T&40T with 3/8 Inch Arbor TCT Circular Saw Blade for Cutting Wood

DIMENSIONS - Includes 2pc 4-1/2*3/8*24T & 2pc 4-1/2*3/8*40T TCT saw blade..
APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts.Carbide-tipped teeth for long-lasting cutting.
FEATURES - Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
Tungsten carbide teeth provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..
The combination of 24T and 40T can meet various cutting needs.

Check Stock