ReviewsBevel Gear Engineering Design

Work Sharp Guided Field Sharpener

  • ... fine honing. And with two glass wheels, you can always have four different grits ready to go (one on each wheel surface), making it easy to move from task to task..
  • Proud to be an American company - Work Sharp is part of Darex, a 4th-generation family owned company in Ashland, Oregon. For over 40 years We have been engineering industry-leading sharpening tools here in the USA..
Check Stock

Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250\ Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • 36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

  • 32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

1PC 90-Degree reversing Angle Gear Right Angle Gear Steering Small Bevel Gear Box Bevel Gear Speed Ratio 1:1 (A)

  • 16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

OLI Digital Angle Finder Protractor 3-in-1 Aluminum 14 Inch Angle Finder Ruler with Horizontal & Vertical Bubbles

  • ▶【Digital Angle Finder Ruler】Measure all your workshop angles, bevel angles, bevel crowns, trims, engineering drawings, square frames, miter saw....
  • ▶【Length & Angle Measuring】Come with a 14-inch ruler, higher accuracy, clearer scale, better line drawing experience. Angle Measuring Range:....
  • ▶【Backlit LCD Display】Designed with backlit LCD display which makes it possible to read the data clearly, even under a Low light circumstance.....
  • ▶【Horizontal and Vertical Bubble Level】Designed with horizontal and vertical bubble which can be used like a level to help you check and....
  • ▶【After-Sale Service】OLI tools made of high quality material and passed strict quality inspection, if you are unhappy with this level, please do....
Check Stock

Boston Gear L153Y-G Bevel Gear, 1.5:1 Ratio, 0.750\ Bore, 10 Pitch, 30 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 30 teeth for use with L153Y-P mating bevel gear in 1.5:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear L147Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188\ Bore, 20 Pitch, 10 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 10 teeth for use with L147Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

EUDAX 82 pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Toy Motor Car Robot Various Gear Axle Belt Bushings

  • The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy toy cars/robots/motors..
  • Axle length of 30mm, 50mm, 70mm, 100mm, shaft diameter is 2mm, 2pcs / kind, for a total of 8 Pcs.
  • Five wheel wheels: outer diameter 30mm, inner hole 2mmfor a total of 4 Pcs.
  • The characteristics of gear: 36MM yellow 2mm hole belt wheel, rack, four-wheel drive, 28 tooth 2mm hole Fan teeth and 30-100mm gear axle, five wheel wheel diameter 30mm!Multi-uses, you can use it to fix the toys,Great for diy science and small production, product design and mechanical model..
  • Most gear is 2mm aperture (tight or loose), in addition to one 81.5A spindle hole is 1.5mm, there are 2 crown is 2.5mm, there are 1 crown gear C303A is 3mm, one 15 teeth 2.3mm hole and 3.17mm hole..
Check Stock

The Learning Journey - Techno Gears - Rockin Rover - 80+ Pieces - Toy Interlocking Gear Sets for Boys & Girls Ages 6 Years and Up - Award Winning Toys

  • KEY FEATURES – The Techno Gears sets are the perfect way to encourage youngsters to build. With 80+ colorful construction pieces like translucent colored plastic and flashy chrome parts, rotating gears, and moving continuous track, the kit include everything your engineering enthusiast needs to build their own moving and working rover. The mechanics of these Techno Gear sets include gears and will introduce and allow them to experience the science of gear ratio. These products align with and support STEM (Science, Technology, Engineering and Math standards). Requires 2 “AA” batteries not incl.
  • EDUCATIONAL BENEFITS – Promotes thinking and learning, sharpens tactile/motor skills, and inspires creativity.
  • SAFETY - All Learning Journey products are regularly safety tested and in compliance with all domestic and international toy safety regulations..
  • AWARD WINNING PRODUCTS – Fun fact: The Learning Journey has an extensive line of award winning educational toys that have been tested by the most important panel of judges kids!.
  • SUPPORTS DEVELOPMENTAL SKILLS – Promotes PROBLEM-SOLVING SKILLS. Expands knowledge of MECHANICS and ENGINEERING. Builds SELF-CONFIDENCE as children design vehicles that move and work. Aligns with STEM (Science, Technology, En....
Check Stock

DEWALT ATOMIC 20V MAX* Circular Saw, 4-1/2-Inch, Tool Only (DCS571B)

  • Brushless motor of DEWALT circular saw allows you to cut up to 369 linear feet of 3/4-inch OSB using DCB205 battery (sold separately).
  • The cordless circular saw has the removable auxiliary handle for increased control.
  • The compact circular saw has a hang hook for increased convenience.
  • On-board blade key storage for hassle free blade changes.
  • 1-1/2-inch finger trigger allows users to choke-up on tool if necessary for their application.
  • Bevel gear allows users to cut 2x material at 90 degrees with a 4-1/2-inch blade.
  • Electronic blade brake stops blade quickly for safety and productivity.
  • Bevel lever gives user the ability to bevel at 45 degrees to cut 1x dimensional lumber.
Check Stock

Miter Saw Box Set, 12Inch Plastic Miter Saw Box Kit Multiple Angle 90 Degrees 45 Degrees and 22.5 Degrees For Woodworking DIY Home Decoration Craftsmanship

  • 3 Cutting AnglesThe miter saw's bevel box has three angles of cut: 90 degree, 45 degree and 22.5 degree, you can choose the right angle for cutting according to your needs.
  • Precise PositioningThis miter saw set is used as a woodworking aid tool to help you better position and cut quickly, making your work easier.
  • Easy to UseThe miter saw is simple in structure and very convenient to use. It is in accordance with the design of human engineering mechanics and it is labor-saving.
  • Premium Alloy SteelThe rear saw of this product is made of SK5 alloy steel, sharp and durable. The miter box is made of ABS engineering plastic, which has high wear resistance.
  • ApplicationsComing with a 14" back saw, this miter saw kit is mainly used for woodworking DIY, home decoration, crafts, etc.
Check Stock