ReviewsBevel Gear Puller

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

DASBET 3 Jaw Pilot Bearing Puller, Heavy Duty Pullers Set Bushing Gear Extractor Wheel Bearing Puller Automotive Machine Tool Kit for Car SUV

  • 3 Jaw Gear Puller: Used to removes pilot bearings, pump bearings, brushings.Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside..
  • Premium Quality: 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.Drive screw is covered by phosphating, which provides maximum strength and longevity to the gear puller..
  • Bearing Range: Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force..
  • Wide Application: Puller Set is ideal for: Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Package Included: 1 x 3 Jaw Pilot Bearing Puller.
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Shankly Harmonic Balancer Puller, Crankshaft Pulley Removal Tool or Harmonic Pulley Puller Tool, Steering Wheel Puller Kit with Heavy-Duty Case for Pulley Puller and Installer Kit

  • ✅ HARMONIC BALANCER PULLER SET: This pulley puller, and other tools are designed to handle a variety of jobs, giving the user multiple uses for a single toolset and allowing for the easy and simple removal of steering wheels and crankshaft pulleys.
  • ✅ TIME SAVER: This gear puller tool or harmonic puller eliminates the need for a technician to go through the time-consuming process of first removing the radiator before being able to remove the pulley.
  • ✅ STRONG JAW DESIGN: This harmonic balancer puller jaw design or (tools flywheel puller tool set) provides greater durability, clevis pins allow jaws to be quickly removed and installed, allowing the user to finish the job quickly and effectively.
  • ✅ IDEAL FOR TIGHT SPACES: Shankly's pully puller tool or gear puller is designed to extract damper pulleys in tight engine compartments, the compact design provides more room to work than many harmonic balancer puller tool.
  • ✅ HEAVY-DUTY CASE: This harmonic balancer puller/installer set or puller set sits neatly in a tidy blow molded case with a built-in handle and slide latches making it simple and easy to move and store this tool.
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

OTC 1180 10-Ton Capacity Push Puller Set

  • 3 popular OTC bar-type pullers in one versatile set, all packed in a handy plastic storage case.
  • permits damage-free pulling of gears, bearings,....
  • Ideal for servicing heavy-duty trucks, off-road construction equipment, and machinery.
  • Set consists of a No. 927 10-ton push-puller with 6-3/4 inch puller legs, an 8-3/8 inch reach and a 2-1/8 to 7-1/4 inch spread.
  • No. 522 Gear and Pulley Puller has a spread range of 2 inches to 7-3/4 inches when used with 1/2 inch cap screws (cap screws not included).
  • No. 7393 Gear and Pulley Puller includes 5-1/2 inch long and 13 inch long forcing screws and two 3/8-16 x 3 inch long hex head cap screws.
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Orion Motor Tech OMT Gear Puller Set 3 4 6 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal Heavy Duty Pulley Puller with Reversible Jaws 3 pcs Bearing Puller Tool Kit

  • UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts.
  • BETTER TOGETHER: Our bearing puller set includes three puller sizes, offering maximum spreads of 3", 4", and 6" and reaches of 4.3", 5", and 7.3" to cover most applications.
  • 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage.
  • REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6" gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes.
  • TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock