ReviewsBevel Gear Tooth

CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

[Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 8mm hole diameter, 22mm overall length, Maximum Outer Diameter: 31.6mm/1.24". Please confirm the correct size before purchasing..
[Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
[Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..

LONGER RUN TIME & BATTERY LIFE—Industry leading PWR CORE 20 lithium battery technology wraps each cell with cooling material to keep the battery powering on for 25% longer run time and 2X battery life..
CHARGES IN 5 MINUTES—Automatic PWR Jump charges the battery in just 5 minutes..
QUICK AND CLEAN CUTS—24-tooth ultra-thin carbide-tipped blade ensures accurate cuts again and again, while integrated dust blower keeps cut line visible..
DIGITAL BRUSHLESS MOTOR—Provides efficient, high-performance and extended tool life..
0-50 DEGREE BEVEL CAPACITY—Easy bevel adjustment allows for a variety of bevel cuts and many applications..

64 teeth for use with G486Y-P mating bevel gear in 4:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

Includes spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar.
Pieces 75, ideal for DIY science and small production, product design and mechanical model.
19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one).
2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one).
5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee Collar.

Track saw with plunge action – provides fast, easy setup for one-step clean finish cuts in wood and wood-based sheet goods such as laminated particle boards and plywood.
Plunge mechanism – allows for precise plunge cuts with accurate depth of cut.
Single bevel pivot point – when sawing using a track (sold separately), the track can be positioned in the same way for bevel cuts or non-bevel cuts.
Constant electronics – helps maintain speed under the load of more-demanding applications.
Overload protection – protect the motor from overheating.
Efficient dust extraction – when connected to suitable vacuum cleaner, supports easier working conditions.
Swiveling hose port – keeps optional vacuum cleaner hose out of the way.
Easy blade-change system – quick three-step blade swap with spindle lock and on-board hex key.
Tracking adjustment – features front and rear knobs for adjusting the precision of the fit of the saw to the track to deliver the best cutting experience.
Specialized 48-tooth 6-1/2 In. track saw blade – designed for clean, precise results.

75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear Description: Material: plastic Type: spindle gear, crown gear, single gear, double gear, worn gear, bevel gear, belt pulley, belt, connecting rack, axle sleeve, tee collar Quantity: 75 Feature: 75 type ideal for DIY science and small production, product design and mechanical model Package included: 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one) 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one) 5X Belt(each one) 2X Connection Rack(each one) 1X Tee Collar.

Original replacement handle for Sentro knitting machines..
Compatible with Sentro 48 needle knitting machine.
The knitting machine 48 needles Crank/Handle are made of high-quality plastic, odorless, safe..
22 needle knitting machine -23 tooth gear crank,40 needle knitting machine -18 tooth gear crank,48 needle knitting machine-20 tooth gear crank.

36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.