ReviewsBevel Gears

UJIKHSD High Speed 4WD 1/10 RC Rally Racing and Drift Car for Adults and Kids, 80KM/H On Road Remote Control Car RC Truck 2.4Ghz RTR Vehicle RC Crawler

The design of the steering cup header is a good design that greatly reduces the collision failure rate. When the vehicle collides with excessive force, the header and the steering cup will loosen and disengage without damaging the steering cup or the lower swing arm..
The gears use 0.8M mold (32DP) to withstand large torque, and the driving gears, planetary gears, and large bevel reduction gears are all made of high-strength steel, which is stable and durable..
The motor compartment and the vertical transmission shaft have transparent dust-proof covers, which not only prevent dust and sound insulation, but also prevent sand and gravel from entering the gears and causing damage to the gears. It is suitable for beach cars..
The new design adopts a box-type frame structure, and a 3mm aluminum alloy chassis is used at the front and rear, which combines rigidity and flexibility. Taking into account high strength and light weight..
Excellent performance in off-road, mountain roads, beaches, etc., good shock absorption performance, and has a body posture when turning!.

36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

VARIETY OF GEARS, This 78 pcs gear package includes: axles, tires, gears, bushings, rack, etc, so basically buy back can always be used. Enough for you to choose and durable for use..
MORE COMPREHENSIVE THINGS , spindle, single, double, crown gear, pulley, rack, bevel gear, copper gear, axle, axles, tires, rubber bands and so on..
USED FOR DIY, The gears set is good accessories for your toy car , robot and so on, Easy to change when the gear is missing or damaged, as a spare accessory to use..
MADE OF HIGH QUALITY PLASTIC, wearable and long service life. Small parts, easy to use..
SATISFACTION GUARANTEE, We care for every customers feeling.If this product does not meet or exceed your expectations,please send it back for a 100% refund no questions asked..

30 teeth for use with L153Y-P mating bevel gear in 1.5:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

10 teeth for use with L147Y-G mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

1.Bronze bevel gear generally has better corrosion resistance, abrasion resistance, casting and excellent mechanical properties..
2.This not only increases durability and longevity but even reduces noise over time..
3.The straight type bronze gear is designed to used with power feed milling machine as long as the direction of the tooth is same..
4.This compact bevel gear is easy to install with some small or large shim..
5.The gears include bronze gear and iron gear are milled by pricing milling skill for high precision and accuracy..

18 teeth for use with L152BY-G mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.