ReviewsBeverage Decanter With Spigot

Stainless Steel Beer Beverage Dispenser Replacement Spigot Faucet Black Handle for Coffee Jar Juice Cold Hot Water Wine Beer Drink barrel Milk tea bucket by MUGLIO(16mm)

  • The Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
  • This Beverage Dispenser Replacement Spigot Has Quarter-Turn Ceramic Valve. It requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
  • Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
  • Notice - Wash and tear off the blue protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
  • Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock

Stainless Steel Beverage Dispenser Spigot Replacement Spout Metal Faucet Fits 34 inch opening for Water Dispenser Drink Dispenser Food Grade by GwenB ,(A002)

  • The Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
  • Fit Most of The Water Cooler, Water Dispenser, Water Bottle, Water Bucket, Juice and Ice Tea Brewers, Watermelon, Fruit Keg etc..
  • This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
  • Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Steel models..
  • and Friendly Customer Service: We have a commitment to every buyer 100 percent satisfaction. If you have any problems about our Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willingness..
Check Stock

Mind Reader GALBDISP-SIL 3 Gallon Cold Beverage Dispenser, Leak Free Spigot, Serving, Galvanized Metal, Silver

  • Large capacity Beverage dispenser – holds up to 3 gallons. Perfect for home made Iced tea, lemonade, sangria, rum punch, water and much more..
  • Durable – galvanized metal container holds drinks safely. High quality metal construction will last for years of usage.
  • Spill proof – metal top lid top prevents anything from outside getting into the drink.
  • Mess free – non-drip spigot prevents a leaky faucet. No more having to worry about your Table cloth or Table getting ruined by beverages.
  • Leak Proof Spigot – The spigot was designed with great attention to detail as it will not leak even when it is at full capacity and you have been pouring drinks all day..
  • Mess Free – The non-drip spigot prevents a leaky faucet. No more having to worry about your Table cloth or Table getting ruined by beverages. Most importantly you and your guest can pour drinks without having to worry about the spigot leaking juice or water on your shoes or clothing..
  • Easy Removable Lid – Comes with an easy to remove lid that allows you to add extra ingredients to your sangria like apples, grapes, oranges, pears and any other special addition you would like to add to your beverage..
Check Stock

X-Chef Stainless Steel Drink Dispenser Spigot, Replacement Faucet for Beverage Dispenser or Glass Jar

  • VERSATILE: The X-Chef Beverage Dispenser Replacement Faucet is great for dispensing lemonade, sun tea, kombucha, wine, juice or water at parties and wedding receptions..
  • FIT MOST DISPENSER: The Drink Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm deep, compatible with most water jugs, mason jars and beverage containers..
  • STEADY FLOW: The X-chef Dispenser Replacement Spigot provides steady flow of your beverage and do not clog after easy installation. You can rinse thoroughly by clean water before use..
  • LIFE LONG USE: Durable and corrosive-resistant, this Beverage Dispenser Replacement Spigot is made of premium 304 stainless steel. No lead, no rust and leak-free. It can last a lifetime under proper appliance..
  • RISK-FREE: We have confidence in our quality product line. If you are not satisfied with our replacement spigots, please feel free to contact us..
Check Stock

Whiskey In The Jar

  • 4 in 1 Full Set - Our whiskey decanter set comes with wooden stand, bottle stopper and pouring funnel. Upgrade your Bar with our premium quality Globe Whiskey Decanter!.
  • Universal Alcohol Carafe - Globe shaped whiskey decanter replaces all your bottles and could be filled with whiskey, vodka, rum, scotch, wine, brandy, liquor, rice wine, juice, gin, any kind of alcoholic beverages in your bar. Romantic item for him!.
  • Preserving Freshness - A fitted silicone-glass stopper seals the globe whiskey decanter for ideal storage, keeping your favorite beverage flavorful and aromatic..
  • ☑️ Premium gift box – We provide you the premium gift box for the whiskey decanter & glass set to impress your husband, boyfriend, colleague or your boss! Best vintage presents for whiskey lovers on their birthday, anniversary or wedding..
  • The Perfect Bar Set - Kemstood bourbon decanter set will elevate your bar! It's a must have bar accessory to give your bar the premium feel! Scotch decanter globe fits well for every type of celebration..
Check Stock

BTSKY™Stainless Steel Beverage Dispenser Replacement Spigot Fits 16mm(5/8 inch)Opening - No Lead Dispenser Replacement Faucet, Polished Finish

  • Multifunction Replacement Spigot: stainless steel spigot for beverage dispenser, juice jar or wine barrel or or any other beverages. A great addition to outdoor parties, receptions, hotel dining rooms,or any other events.
  • Quick Installation: this replacement spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
  • Premium Quality : This Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable, good for health and with a long life with proper appliance.
  • Notice: Please wash it before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten.
  • Do not over-tighten, clean thoroughly after each use, keep in open position for storage.
  • Excellent Flow with No Leaks: This stainless steel spigot will not only look nicer but will dispense any juice or drinks efficiently, unlike plastic or low-quality spigots that tend to leak, crack or splash water or juice everywhere, this spigot has an excellent continuous flow.
Check Stock

X-Chef Beverage Dispenser Spigot Replacement, Stainless Steel Metal Spigot for Glass Jar & Drink Dispenser, Set of 2

  • VERSATILE: The X-Chef Beverage Dispenser Replacement Faucet is great for dispensing lemonade, sun tea, kombucha, wine, juice or water at parties and wedding receptions..
  • LIFE LONG USE: Durable and corrosive-resistant, this Beverage Dispenser Replacement Spigot is made of premium stainless steel. No lead, no rust and leak-free, they can last a lifetime under proper appliance..
  • FIT MOST DISPENSER: The Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm deep, compatible with most home use jugs, canisters and more..
  • STEADY FLOW: The X-chef Dispenser Replacement Spigot provides steady flow of your beverage and do not clog after easy installation. You can rinse thoroughly by clean water before use..
  • Satisfying After-sale Service. We have confidence in our quality product line. If you are not satisfied with our replacement spigots, please do not hesitate to contact us..
Check Stock

OFNMY 2 Pack Beverage Dispenser Replacement Spigot,Stainless Steel Polished Finished, Water Dispenser Replacement Faucet for Beverage Dispenser or Glass Jar

  • ????Fits Dispenser Wall Up to 11/16 inch or 17mm Thick – This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install, total size: 97mm x 61mm or 3.81 inch x 2.39 inch..
  • ????Fits All Berkey Stainless Steel Models, NOT Berkey Light – The Beverage Dispenser Replacement Faucet is made of food-grade SUS304 stainless steel, No Lead, Acid Resistant, great for dispensing tea, beverage, vinegar or wine. and works for most self-serve, traditional beverage service and parties..
  • ????Fast & Steady Flow Rate – Dispenser Replacement Spigot provides steady flow of your beverage and do not clog after easy installation..
  • ????Notice – Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
  • ????How to use? – Step1: Hold a faucet, place a stainless gasket and then a silicone gasket into it.
  • Step2: Thread faucet through your beverage dispenser, and then a silicone gasket, a washer and a nut.
Check Stock

Outdoor Glass Beverage Dispenser with Stainless Steel Spigot & Ice Cylinder - 1 Gallon Drink Dispenser for Tea, Lemonade, Cold Water & More

  • EASY TO USE – Fill and clean this 1-gallon glass beverage dispenser using the wide mouth opening. Not recommended for use with hot beverages, this dispenser is perfect for lemonade, tea, sangria, ice water, and more! Hand wash only..
  • ADD CHIC STYLE TO YOUR EVENT – Wedding, showers, dinner parties, birthdays, whatever your even might be this outdoor beverage dispenser will add a vintage charm to any setting that will definitely leave your guests talking..
  • STAINLESS STEEL SPIGOT – Each glass drink dispenser has a metal spigot that prevents rust, breakage and leaking. Our spigot is food grade 304 Stainless Steel, resistant to corrosion..
  • LIFETIME REPLACEMENT WARRANTY – Crutello stands behind all of its beverage dispensers 100%. This water dispenser comes with an automatic 1 year warranty. Register online for a free lifetime warranty..
  • MINI CHALKBOARD INCLUDED – Easily mark what is inside each drink dispenser to your guests with the included chalkboard and chalk.
Check Stock

Acopa 5 Gallon Hammered Glass Beverage Dispenser

  • Mason Jar Drink Dispenser – The Estilo single glass mason jar beverage dispenser has a wide-mouth design with a tin screw off lid that makes it easy to clean, use and fill with your favorite beverage..
  • High-Quality and Strong Glass Beverage Dispenser – Our glass dispenser made of thick high-quality, premium-grade glass with a non-drip, easy pull spigot. The liquid dispenser’s spigot is created to provide a steady stream of your favorite drink!.
  • Great for Parties or Everyday Use – This gallon dispenser makes a great centerpiece for parties, holidays, barbecues, picnics, bachelor and bachelorette parties, weddings and more! It’s also a great liquid laundry detergent dispenser..
  • Great Size – Our liquid dispenser holds up to 1 gallon (3.78 liters), so that you can fill with your favorite beverages, iced tea, lemonade, and more. The glass beverage dispenser is not recommended for hot liquids!.
  • Dispenser Dimensions - 12" L x 10” W x 8" H inches. Hand wash only!.
Check Stock

hgzaccompany Stainless Steel Spigot For Drink Dispenser, Replacement Metal Spigot For Beverage Dispenser, Water Dispenser Faucet, Food Grade Metal Spout.

  • Widely Applicable: The replacement spigot is made of high-quality food grade stainless steel, lead-free,anti-corrosion, very durable and good for health. Widely used in self-service drinks and restaurants, suitable for wine, water, tea, juice, etc..
  • Mounting diameter: This beverage dispenser replacement spigot fits 16mm or 5/8 inch openings, and the wall thickness does not exceed 17mm or 11/16 inches..
  • Note: Please clean the faucet before installation. Do not tighten the nut with excessive force. After installation, pour clean water to test whether there is leakage. If there is a leakage, tighten the nut again..
  • Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
  • Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock